On Wed, 7 Feb 2018, Jagan Teki wrote:
Add Kconfig entry for CMD_NANDBCB, and default y on i.MX6 platform with NAND_MXS defined.
Signed-off-by: Jagan Teki jagan@amarulasolutions.com
Changes for v2:
- New patch
arch/arm/mach-imx/Kconfig | 11 +++++++++++ 1 file changed, 11 insertions(+)
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 3aec89d..a8c1239 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -71,6 +71,17 @@ config CMD_HDMIDETECT This enables the 'hdmidet' command which detects if an HDMI monitor is connected.
+config CMD_NANDBCB
- bool "i.MX6 NAND Boot Control Block(BCB) command"
- depends on NAND && CMD_MTDPARTS
- default y if ARCH_MX6 && NAND_MXS
- help
Unlike normal 'nand write/erase' commands, this command updateBoot Control Block(BCB) for i.MX6 platform NAND IP's.This is similar to kobs-ng, which is used in Linux as seprate
^^^^^^^ Typo here
rootfs package.config NXP_BOARD_REVISION bool "Read NXP board revision from fuses" depends on ARCH_MX6 || ARCH_MX7 -- 2.7.4
--- ****************************************************************** * KSI@home KOI8 Net < > The impossible we do immediately. * * Las Vegas NV, USA < > Miracles require 24-hour notice. * ******************************************************************