When I tried to deactivate VIDEO support for the Wandboard, it still tried to initialize the Framebuffer and so on. That is the reason for the added ifdefs. CONFIG_VIDEO is enabled in the configuration as default and therefore nothing changes for the default user.
The structs mx6dl_i2c2_pad_info and mx6q_i2c2_pad_info are only available when CONFIG_IPUV3 are set and should not be tried to access, when that define is not defined.
Signed-off-by: Sven Ebenfeld sven.ebenfeld@gmail.com --- board/wandboard/wandboard.c | 2 ++ include/configs/wandboard.h | 2 ++ 2 files changed, 4 insertions(+)
diff --git a/board/wandboard/wandboard.c b/board/wandboard/wandboard.c index b3f3b34..2c9dc8b 100644 --- a/board/wandboard/wandboard.c +++ b/board/wandboard/wandboard.c @@ -442,11 +442,13 @@ int board_init(void) /* address of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+#if defined(CONFIG_VIDEO_IPUV3) setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c2_pad_info); if (is_mx6dq()) setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6q_i2c2_pad_info); else setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c2_pad_info); +#endif
return 0; } diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h index 8c5cf33..406591c 100644 --- a/include/configs/wandboard.h +++ b/include/configs/wandboard.h @@ -74,6 +74,7 @@ #define CONFIG_PHY_ATHEROS
/* Framebuffer */ +#ifdef CONFIG_VIDEO #define CONFIG_VIDEO_IPUV3 #define CONFIG_VIDEO_BMP_RLE8 #define CONFIG_SPLASH_SCREEN @@ -85,6 +86,7 @@ #define CONFIG_CMD_HDMIDETECT #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP +#endif
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG #define CONFIG_EXTRA_ENV_SETTINGS \