According to the table 31-1 in the QorIQ LS1046A Reference Manual, Rev. 2, 11/2018, the 0x3040 is also a valid setting for the SerDes1. With the current codebase, following message appears when 0x3040 is used:
SERDES1[PRTCL] = 0x3040 is not valid
Signed-off-by: Maciej Pijanowski maciej.pijanowski@3mdeb.com
Cc: prabhakar.kushwaha@nxp.com Cc: piotr.krol@3mdeb.com --- arch/arm/cpu/armv8/fsl-layerscape/ls1046a_serdes.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ls1046a_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/ls1046a_serdes.c index 91de5ff0d3da..12775c65433b 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/ls1046a_serdes.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/ls1046a_serdes.c @@ -33,6 +33,7 @@ static struct serdes_config serdes1_cfg_tbl[] = { SGMII_FM1_DTSEC6} }, {0x2223, {SGMII_2500_FM1_DTSEC9, SGMII_2500_FM1_DTSEC10, SGMII_2500_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0x3040, {SGMII_FM1_DTSEC9, NONE, QSGMII_FM1_A, NONE} }, {} };