This series sync the device tree of the LS1028A SoC with the linux one. To ease future debugging and reviewing, we first clean up the existing one, removing bogus nodes, moving all CCSR related nodes in /soc and update the drivers to accept the offical compatible strings.
This was tested on a sl28 board, but the ls1028a.dtsi sync also affects the LS1028A-RDB and -QDS. It would be nice if someone could actually test it on such a board.
I didn't sync the device trees for the NXP boards because u-boot related things aren't split into its own -u-boot.dtsi file. So I'll leave that task to NXP :)
The following patch is a prerequisite for this series: https://patchwork.ozlabs.org/project/uboot/patch/20210825210510.24766-1-trin...
changes since v2: - move the device tree nodes piece by piece and sort them to ease reviewing - fix PCI driver (bindings) - fix SATA driver (bindings) - fix USB driver (bindings) - split most changes which are caused by the sync of the linux device tree to own patches, eg. pcie io window, spi chip selects
The final diff for the sync is much nicer now ;)
changes since v1: - remove u-boot,dm-pre-reloc from rdb and qds boards - fix enetc0 and enetc2 labels
Michael Walle (29): armv8: ls1028a: add IOMMU stream ID to vivante node arm: dts: ls1028a: remove /memory node arm: dts: ls1028a-{rdb,qds}: remove dm-pre-reloc property arm: dts: ls1028a: add an empty /soc arm: dts: ls1028a: move the clockgen node into /soc arm: dts: ls1028a: move I2C controller nodes into /soc arm: dts: ls1028a: move the FlexSPI controller node arm: dts: ls1028a: move the SPI and eSDHC controller nodes into /soc arm: dts: ls1028a: move the UART controller nodes into /soc arm: dts: ls1028a: move the low-power UART nodes into /soc arm: dts: ls1028a: move the GPIO controller nodes into /soc arm: dts: ls1028a: move SATA and USB controller nodes into /soc arm: dts: ls1028a: move the PCIe controller nodes into /soc arm: dts: ls1028a: move the watchdog node into /soc arm: dts: ls1028a: move the iRC node and its devices into /soc arm: dts: ls1028a: update the labels watchdog: sp805_wdt: use correct compatible string spi: fsl_dspi: add new compatible fsl,ls1021a-v1.0-dspi spi: fsl_dspi: rename num-cs to spi-num-chipselects serial: lpuart: add new compatible fsl,ls1028a-lpuart scsi: ceva: rename the resource name to match the linux kernel one usb: xhci: fsl: add new compatible fsl,ls1028a-dwc3 pci: layerscape: add official ls1028a binding support arm: dts: ls1028a: remove num-lanes in the PCIe controller nodes arm: dts: ls1028a: move the PCI I/O window to match arm: dts: ls1028a: disable the PCIe controller by default arm: dts: ls1028a: drop non-removable property from esdhc controller node arm: dts: ls1028a: sync the fsl-ls1028a.dtsi with linux arm: dts: sl28: sync dtbs
.../arm/cpu/armv8/fsl-layerscape/ls1028_ids.c | 1 + arch/arm/dts/fsl-ls1012a.dtsi | 4 +- .../dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi | 37 +- .../fsl-ls1028a-kontron-sl28-var1-u-boot.dtsi | 2 +- .../arm/dts/fsl-ls1028a-kontron-sl28-var1.dts | 31 +- .../fsl-ls1028a-kontron-sl28-var2-u-boot.dtsi | 8 + .../arm/dts/fsl-ls1028a-kontron-sl28-var2.dts | 46 +- .../fsl-ls1028a-kontron-sl28-var3-u-boot.dtsi | 2 +- .../fsl-ls1028a-kontron-sl28-var4-u-boot.dtsi | 4 +- .../arm/dts/fsl-ls1028a-kontron-sl28-var4.dts | 18 +- arch/arm/dts/fsl-ls1028a-kontron-sl28.dts | 256 ++- .../dts/fsl-ls1028a-qds-1xxx-sch-30842.dtsi | 4 +- .../dts/fsl-ls1028a-qds-6xxx-sch-30842.dtsi | 4 +- .../dts/fsl-ls1028a-qds-7777-sch-30841.dtsi | 12 +- .../dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi | 8 +- .../dts/fsl-ls1028a-qds-8xxx-sch-24801.dtsi | 4 +- .../fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi | 12 +- .../dts/fsl-ls1028a-qds-9999-sch-24801.dtsi | 12 +- arch/arm/dts/fsl-ls1028a-qds-duart.dts | 2 +- .../fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi | 12 +- .../fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi | 12 +- .../dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi | 6 +- .../dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi | 6 +- arch/arm/dts/fsl-ls1028a-qds.dtsi | 25 +- arch/arm/dts/fsl-ls1028a-rdb.dts | 31 +- arch/arm/dts/fsl-ls1028a.dtsi | 1443 ++++++++++++----- arch/arm/dts/fsl-ls1043a.dtsi | 6 +- arch/arm/dts/fsl-ls1046a.dtsi | 6 +- arch/arm/dts/fsl-ls1088a.dtsi | 4 +- arch/arm/dts/fsl-ls2080a.dtsi | 2 +- arch/arm/dts/fsl-lx2160a.dtsi | 6 +- arch/arm/dts/hi3660.dtsi | 4 +- arch/arm/dts/ls1021a.dtsi | 6 +- arch/arm/dts/vf.dtsi | 4 +- drivers/ata/sata_ceva.c | 2 +- drivers/pci/pcie_layerscape_rc.c | 61 +- drivers/serial/serial_lpuart.c | 2 + drivers/spi/fsl_dspi.c | 6 +- drivers/usb/host/xhci-fsl.c | 1 + drivers/watchdog/sp805_wdt.c | 2 +- .../dt-bindings/clock/fsl,qoriq-clockgen.h | 15 + 41 files changed, 1529 insertions(+), 600 deletions(-) create mode 100644 include/dt-bindings/clock/fsl,qoriq-clockgen.h