Hi all,
I'm trying to support one binary that can boot from RPi3 and RPi4 [1].
For this I need to set mem_map at runtime [2]. Up to now, mem_map is defined in lowlevel_init.S which pushes it to section .text_rest
But as Alex noted in the thread, much cleaner would be to define mem_map as an external variable which is put into .data
So the logical solution would be something like struct mm_region *mem_map = bcm283x_mem_map; in arch/arm/mach-bcm283x/init.c But that takes the value at compile time and does not update mem_map afterwards mach_cpu_ini(). Which leads to a binary that can only boot on RPi3.
If instead I define: struct mm_region __attribute__ ((section (".data"))) *mem_map; Then U-boot updates the variable at run-time and boots as expected on RPi3 and RPi4.
I'm banging my head against this for the last few days, but don't really grok why this happens. I suppose that it has something to do with the relocation of U-Boot after boot_init_f sequence is finished, but I'm not sure.
The only difference I can see when using assignment at compile time is, that mem_map get's put into .data.mem_map section [3] and in the relocation section [4] we can see extra entries in section '.rela.text.mach_cpu_init', .data.mem_map Apart from that a nwe section .rela.data.mem_map is created which holds one entry .data.bcm283x_mem_map
To be honest I don't really understand what's going on and if just pushing mem_map to .data through a GCC attribute is the correct thing to do or not.
Any help would be appreciated.
Regards, Matthias
[1]https://patchwork.ozlabs.org/cover/1168351/ [2] https://patchwork.ozlabs.org/patch/1168355/ [3] objdump --disassemble-all arch/arm/mach-bcm283x/built-in.o [4] readelf --relocs arch/arm/mach-bcm283x/built-in.o