Synchronize stm32f7 device tree with kernel v4.20.
Signed-off-by: Patrice Chotard patrice.chotard@st.com ---
arch/arm/dts/stm32f4-pinctrl.dtsi | 27 +++++----- arch/arm/dts/stm32f429-disco.dts | 4 +- arch/arm/dts/stm32f429-pinctrl.dtsi | 3 +- arch/arm/dts/stm32f429.dtsi | 33 ++++++------ arch/arm/dts/stm32f469-disco.dts | 86 ++++++++++++++++++++++++++++++- arch/arm/dts/stm32f469-pinctrl.dtsi | 3 +- arch/arm/dts/stm32f469.dtsi | 19 +++++++ include/dt-bindings/clock/stm32fx-clock.h | 7 +-- 8 files changed, 142 insertions(+), 40 deletions(-) create mode 100644 arch/arm/dts/stm32f469.dtsi
diff --git a/arch/arm/dts/stm32f4-pinctrl.dtsi b/arch/arm/dts/stm32f4-pinctrl.dtsi index 736bca738d36..35202896c093 100644 --- a/arch/arm/dts/stm32f4-pinctrl.dtsi +++ b/arch/arm/dts/stm32f4-pinctrl.dtsi @@ -1,6 +1,5 @@ /* - * Copyright (C) 2017, STMicroelectronics - All Rights Reserved - * Author(s): Alexandre Torgue alexandre.torgue@st.com for STMicroelectronics. + * Copyright 2017 - Alexandre Torgue alexandre.torgue@st.com * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -342,12 +341,12 @@
sdio_pins: sdio_pins@0 { pins { - pinmux = <STM32_PINMUX('C', 8, AF12)>, - <STM32_PINMUX('C', 9, AF12)>, - <STM32_PINMUX('C', 10, AF12)>, - <STM32_PINMUX('c', 11, AF12)>, - <STM32_PINMUX('C', 12, AF12)>, - <STM32_PINMUX('D', 2, AF12)>; + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDIO_D0 */ + <STM32_PINMUX('C', 9, AF12)>, /* SDIO_D1 */ + <STM32_PINMUX('C', 10, AF12)>, /* SDIO_D2 */ + <STM32_PINMUX('C', 11, AF12)>, /* SDIO_D3 */ + <STM32_PINMUX('C', 12, AF12)>, /* SDIO_CK */ + <STM32_PINMUX('D', 2, AF12)>; /* SDIO_CMD */ drive-push-pull; slew-rate = <2>; }; @@ -355,17 +354,17 @@
sdio_pins_od: sdio_pins_od@0 { pins1 { - pinmux = <STM32_PINMUX('C', 8, AF12)>, - <STM32_PINMUX('C', 9, AF12)>, - <STM32_PINMUX('C', 10, AF12)>, - <STM32_PINMUX('C', 11, AF12)>, - <STM32_PINMUX('C', 12, AF12)>; + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDIO_D0 */ + <STM32_PINMUX('C', 9, AF12)>, /* SDIO_D1 */ + <STM32_PINMUX('C', 10, AF12)>, /* SDIO_D2 */ + <STM32_PINMUX('C', 11, AF12)>, /* SDIO_D3 */ + <STM32_PINMUX('C', 12, AF12)>; /* SDIO_CK */ drive-push-pull; slew-rate = <2>; };
pins2 { - pinmux = <STM32_PINMUX('D', 2, AF12)>; + pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDIO_CMD */ drive-open-drain; slew-rate = <2>; }; diff --git a/arch/arm/dts/stm32f429-disco.dts b/arch/arm/dts/stm32f429-disco.dts index 106db68b5b99..d99f47aa724a 100644 --- a/arch/arm/dts/stm32f429-disco.dts +++ b/arch/arm/dts/stm32f429-disco.dts @@ -1,6 +1,5 @@ /* - * Copyright (C) 2015, STMicroelectronics - All Rights Reserved - * Author(s): Maxime Coquelin mcoquelin.stm32@gmail.com for STMicroelectronics. + * Copyright 2015 - Maxime Coquelin mcoquelin.stm32@gmail.com * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -76,6 +75,7 @@
gpio_keys { compatible = "gpio-keys"; + #address-cells = <1>; #size-cells = <0>; autorepeat; button@0 { diff --git a/arch/arm/dts/stm32f429-pinctrl.dtsi b/arch/arm/dts/stm32f429-pinctrl.dtsi index 77246b3d79ea..3e7a17d9112e 100644 --- a/arch/arm/dts/stm32f429-pinctrl.dtsi +++ b/arch/arm/dts/stm32f429-pinctrl.dtsi @@ -1,6 +1,5 @@ /* - * Copyright (C) 2017, STMicroelectronics - All Rights Reserved - * Author(s): Alexandre Torgue alexandre.torgue@st.com for STMicroelectronics. + * Copyright 2017 - Alexandre Torgue alexandre.torgue@st.com * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual diff --git a/arch/arm/dts/stm32f429.dtsi b/arch/arm/dts/stm32f429.dtsi index 046aeff7ccca..c5c029b9e36c 100644 --- a/arch/arm/dts/stm32f429.dtsi +++ b/arch/arm/dts/stm32f429.dtsi @@ -1,6 +1,5 @@ /* - * Copyright (C) 2015, STMicroelectronics - All Rights Reserved - * Author(s): Maxime Coquelin mcoquelin.stm32@gmail.com for STMicroelectronics. + * Copyright 2015 - Maxime Coquelin mcoquelin.stm32@gmail.com * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -259,6 +258,7 @@ };
timers13: timers@40001c00 { + #address-cells = <1>; #size-cells = <0>; compatible = "st,stm32-timers"; reg = <0x40001C00 0x400>; @@ -273,6 +273,7 @@ };
timers14: timers@40002000 { + #address-cells = <1>; #size-cells = <0>; compatible = "st,stm32-timers"; reg = <0x40002000 0x400>; @@ -296,7 +297,7 @@ interrupt-parent = <&exti>; interrupts = <17 1>; interrupt-names = "alarm"; - st,syscfg = <&pwrcfg>; + st,syscfg = <&pwrcfg 0x00 0x100>; status = "disabled"; };
@@ -304,6 +305,7 @@ compatible = "st,stm32-iwdg"; reg = <0x40003000 0x400>; clocks = <&clk_lsi>; + clock-names = "lsi"; status = "disabled"; };
@@ -505,6 +507,17 @@ }; };
+ sdio: sdio@40012c00 { + compatible = "arm,pl180", "arm,primecell"; + arm,primecell-periphid = <0x00880180>; + reg = <0x40012c00 0x400>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(SDIO)>; + clock-names = "apb_pclk"; + interrupts = <49>; + max-frequency = <48000000>; + status = "disabled"; + }; + syscfg: system-config@40013800 { compatible = "syscon"; reg = <0x40013800 0x400>; @@ -540,6 +553,7 @@ };
timers10: timers@40014400 { + #address-cells = <1>; #size-cells = <0>; compatible = "st,stm32-timers"; reg = <0x40014400 0x400>; @@ -554,6 +568,7 @@ };
timers11: timers@40014800 { + #address-cells = <1>; #size-cells = <0>; compatible = "st,stm32-timers"; reg = <0x40014800 0x400>; @@ -572,18 +587,6 @@ reg = <0x40007000 0x400>; };
- sdio: sdio@40012c00 { - compatible = "st,stm32f4xx-sdio"; - reg = <0x40012c00 0x400>; - clocks = <&rcc 0 171>; - interrupts = <49>; - status = "disabled"; - pinctrl-0 = <&sdio_pins>; - pinctrl-1 = <&sdio_pins_od>; - pinctrl-names = "default", "opendrain"; - max-frequency = <48000000>; - }; - ltdc: display-controller@40016800 { compatible = "st,stm32-ltdc"; reg = <0x40016800 0x200>; diff --git a/arch/arm/dts/stm32f469-disco.dts b/arch/arm/dts/stm32f469-disco.dts index 3ecef2867366..3ceb84d8ba8a 100644 --- a/arch/arm/dts/stm32f469-disco.dts +++ b/arch/arm/dts/stm32f469-disco.dts @@ -41,8 +41,10 @@ */
/dts-v1/; -#include "stm32f429.dtsi" +#include "stm32f469.dtsi" #include "stm32f469-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h>
/ { model = "STMicroelectronics STM32F469i-DISCO board"; @@ -72,11 +74,40 @@ dma-ranges = <0xc0000000 0x0 0x10000000>; };
+ leds { + compatible = "gpio-leds"; + green { + gpios = <&gpiog 6 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + orange { + gpios = <&gpiod 4 GPIO_ACTIVE_LOW>; + }; + red { + gpios = <&gpiod 5 GPIO_ACTIVE_LOW>; + }; + blue { + gpios = <&gpiok 3 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + button@0 { + label = "User"; + linux,code = <KEY_WAKEUP>; + gpios = <&gpioa 0 GPIO_ACTIVE_HIGH>; + }; + }; + /* This turns on vbus for otg for host mode (dwc2) */ vcc5v_otg: vcc5v-otg-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpiob 2 0>; + gpio = <&gpiob 2 GPIO_ACTIVE_HIGH>; regulator-name = "vcc5_host1"; regulator-always-on; }; @@ -90,6 +121,55 @@ clock-frequency = <8000000>; };
+&dsi { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi_in: endpoint { + remote-endpoint = <<dc_out_dsi>; + }; + }; + + port@1 { + reg = <1>; + dsi_out: endpoint { + remote-endpoint = <&dsi_panel_in>; + }; + }; + }; + + panel-dsi@0 { + compatible = "orisetech,otm8009a"; + reg = <0>; /* dsi virtual channel (0..3) */ + reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>; + status = "okay"; + + port { + dsi_panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; +}; + +<dc { + dma-ranges; + status = "okay"; + + port { + ltdc_out_dsi: endpoint@0 { + remote-endpoint = <&dsi_in>; + }; + }; +}; + &rtc { status = "okay"; }; @@ -125,6 +205,8 @@ &sdio { status = "okay"; vmmc-supply = <&mmc_vcard>; + cd-gpios = <&gpiog 2 GPIO_ACTIVE_LOW>; + broken-cd; pinctrl-names = "default", "opendrain"; pinctrl-0 = <&sdio_pins>; pinctrl-1 = <&sdio_pins_od>; diff --git a/arch/arm/dts/stm32f469-pinctrl.dtsi b/arch/arm/dts/stm32f469-pinctrl.dtsi index dd641580c9bd..fff542662eea 100644 --- a/arch/arm/dts/stm32f469-pinctrl.dtsi +++ b/arch/arm/dts/stm32f469-pinctrl.dtsi @@ -1,6 +1,5 @@ /* - * Copyright (C) 2017, STMicroelectronics - All Rights Reserved - * Author(s): Alexandre Torgue alexandre.torgue@st.com for STMicroelectronics. + * Copyright 2017 - Alexandre Torgue alexandre.torgue@st.com * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual diff --git a/arch/arm/dts/stm32f469.dtsi b/arch/arm/dts/stm32f469.dtsi new file mode 100644 index 000000000000..0d58d40649f7 --- /dev/null +++ b/arch/arm/dts/stm32f469.dtsi @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* Copyright (C) STMicroelectronics 2017 - All Rights Reserved */ + +#include "stm32f429.dtsi" + +/ { + soc { + dsi: dsi@40016c00 { + compatible = "st,stm32-dsi"; + reg = <0x40016c00 0x800>; + interrupts = <92>; + resets = <&rcc STM32F4_APB2_RESET(DSI)>; + reset-names = "apb"; + clocks = <&rcc 1 CLK_F469_DSI>, <&clk_hse>; + clock-names = "pclk", "ref"; + status = "disabled"; + }; + }; +}; diff --git a/include/dt-bindings/clock/stm32fx-clock.h b/include/dt-bindings/clock/stm32fx-clock.h index 49bb3c203e5c..58d8b515be55 100644 --- a/include/dt-bindings/clock/stm32fx-clock.h +++ b/include/dt-bindings/clock/stm32fx-clock.h @@ -33,11 +33,12 @@ #define CLK_SAI2 11 #define CLK_I2SQ_PDIV 12 #define CLK_SAIQ_PDIV 13 - -#define END_PRIMARY_CLK 14 - #define CLK_HSI 14 #define CLK_SYSCLK 15 +#define CLK_F469_DSI 16 + +#define END_PRIMARY_CLK 17 + #define CLK_HDMI_CEC 16 #define CLK_SPDIF 17 #define CLK_USART1 18