my kernel config is (arch/arm/def-configs/lubbock): ... CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200" ... my u-boot env config is: ... bootargs=root=/dev/nfs ip=bootp console=ttyS0,115200 ... stdin=serial stdout=serial stderr=serial ...
is it right? Hongda zhao ----- Original Message ----- From: "Kyle Harris" kharris@nexus-tech.net To: "Zhao Hongda" zhaohd@vis.cs.tsinghua.edu.cn; u-boot-users@lists.sourceforge.net Sent: Tuesday, July 01, 2003 9:14 PM Subject: Re: [U-Boot-Users] How can I save zImage & fsimage.tar into Flash memory then boot
On Tuesday 01 July 2003 08:50 am, Zhao Hongda wrote:
After do such steps, I try to "bootm 0x40000", but the kernel hangs: ## Booting image at 00040000 ... Image name: 2.4.18 kernel Image Type: ARM Linux kernel Image (gzip compressed) Data Size: 714025 Bytes =697.3kB Load Address: a0008000 Entry Point: a0008000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Starting kernel... (hangs)
What are your bootargs? Make sure the console is configured correctly.
console=ttyS0,115200
This SF.Net email sponsored by: Free pre-built ASP.NET sites including Data Reports, E-commerce, Portals, and Forums are available now. Download today and enter to win an XBOX or Visual Studio .NET. http://aspnet.click-url.com/go/psa00100006ave/direct;at.asp_061203_01/01 _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users