Hi Stefan,

Yes, I am, and that is where I've started.  I currently have got a simple copy to compile cleanly, but none of the device-specific code has been checked to see if it needs to be modified.

Any hints as to where I should start?  For example, I'm guessing the serial port is rather important, right?  But do I need the interrupts functioning to enable serial communications?  In other words, is the serial port interrupt-driven?  I'm guessing I need to find "main", follow the hardware initialization code, and that should point me where I need to go...

Thanks,
-Bob

Stefan Roese wrote: 
Hi Bob,

On Wednesday 02 May 2007 18:42, Robert S. Grimes wrote:
  
I'm getting started porting U-Boot to the Freescale/LogicPD M5329EVB
board, based on the ColdFire MCF5329 processor.  As suggested in the
"U-Boot Porting Guide" in the README file, I've subscribed to this list,
and I'm admitting I am (currently) clueless - hence this email!

At this point, my only real question is this - has anybody done this
already?
    

I have not head of a MCF5329 U-Boot port. You are aware that the MCF52x2 
CondFires are supported? So this should be your starting point. Grep 
for "MCF52" in include/configs/* and you will see what boards are available 
with this CPU's.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH, HRB 165235 Munich, CEO: Wolfgang Denk
Office:  Kirchenstr. 5,       D-82194 Groebenzell,            Germany
=====================================================================