On 6 October 2016 at 08:28, Przemyslaw Marczak p.marczak@samsung.com wrote:
Hello,
On 10/05/2016 06:50 PM, Simon Glass wrote:
Hi Keerthy,
On 5 October 2016 at 05:58, Keerthy a0393675@ti.com wrote:
On Monday 19 September 2016 06:29 AM, Simon Glass wrote:
On 15 September 2016 at 05:34, Keerthy j-keerthy@ti.com wrote:
Add support for gpio regulators. As of now this driver caters to gpio regulators with one gpio. Supports setting voltage values to gpio regulators and retrieving the values.
Signed-off-by: Keerthy j-keerthy@ti.com
Changes in v2:
- Added states and voltages as part of plat data to have a generic state to voltage mapping removing any assumptions.
drivers/power/regulator/Kconfig | 8 ++ drivers/power/regulator/Makefile | 1 + drivers/power/regulator/gpio-regulator.c | 137 +++++++++++++++++++++++++++++++ include/power/regulator.h | 1 + 4 files changed, 147 insertions(+) create mode 100644 drivers/power/regulator/gpio-regulator.c
Reviewed-by: Simon Glass sjg@chromium.org
Simon,
Wanted to know who is pulling this patch.
Looking in patchwork it is assigned to Przemyslaw.
Regards, Simon
I'm sorry for the silence, I have very limited time for open source at present, and now it's hard for me to watch the list. Simon, I will assign it to you in patchwork, since you have already done the review.
Applied to u-boot-dm, thanks!