[U-Boot] [PATCH v5 1/7] cros: add cros_ec driver

15 May 2013

This patch adds the cros_ec driver that implements the protocol for
communicating with Google's ChromeOS embedded controller.
Signed-off-by: Bernie Thompson bhthompson@chromium.org
Signed-off-by: Bill Richardson wfrichar@chromium.org
Signed-off-by: Che-Liang Chiou clchiou@chromium.org
Signed-off-by: Doug Anderson dianders@chromium.org
Signed-off-by: Gabe Black gabeblack@chromium.org
Signed-off-by: Hung-ying Tyan tyanh@chromium.org
Signed-off-by: Louis Yung-Chieh Lo yjlou@chromium.org
Signed-off-by: Randall Spangler rspangler@chromium.org
Signed-off-by: Sean Paul seanpaul@chromium.org
Signed-off-by: Simon Glass sjg@chromium.org
Signed-off-by: Vincent Palatin vpalatin@chromium.org
---
Changes in v5: None
Changes in v4:
- Removed unrelated exynos-spi.txt.
- Moved cros-ec-keyb.txt to the cros-ec-keyb patch.
Changes in v3: None
Changes in v2:
- Fixed warnings of exceeding 80 chars in a line.
- Added commit message.
- Dropped the period from commit subject.
doc/device-tree-bindings/misc/cros-ec.txt |   38 +
 drivers/misc/Makefile                     |    1 +
 drivers/misc/cros_ec.c                    | 1304 ++++++++++++++++++++++++++
 include/cros_ec.h                         |  449 +++++++++
 include/cros_ec_message.h                 |   44 +
 include/ec_commands.h                     | 1440 +++++++++++++++++++++++++++++
 include/fdtdec.h                          |    1 +
 lib/fdtdec.c                              |    1 +
 8 files changed, 3278 insertions(+)
 create mode 100644 doc/device-tree-bindings/misc/cros-ec.txt
 create mode 100644 drivers/misc/cros_ec.c
 create mode 100644 include/cros_ec.h
 create mode 100644 include/cros_ec_message.h
 create mode 100644 include/ec_commands.h

diff --git a/doc/device-tree-bindings/misc/cros-ec.txt b/doc/device-tree-bindings/misc/cros-ec.txt
new file mode 100644
index 0000000..07ea7cd
--- /dev/null
+++ b/doc/device-tree-bindings/misc/cros-ec.txt
@@ -0,0 +1,38 @@
+Chrome OS CROS_EC Binding
+======================
+
+The device tree node which describes the operation of the CROS_EC interface
+is as follows:
+
+Required properties :
+- compatible = "google,cros-ec"
+
+Optional properties :
+- spi-max-frequency : Sets the maximum frequency (in Hz) for SPI bus
+   operation
+- i2c-max-frequency : Sets the maximum frequency (in Hz) for I2C bus
+   operation
+- ec-interrupt : Selects the EC interrupt, defined as a GPIO according
+   to the platform
+- optimise-flash-write : Boolean property - if present then flash blocks
+   containing all 0xff will not be written, since we assume that the EC
+   uses that pattern for erased blocks
+
+The CROS_EC node should appear as a subnode of the interrupt that connects it
+to the EC (e.g. i2c, spi, lpc). The reg property (as usual) will indicate
+the unit address on that bus.
+
+
+Example
+=======
+
+	spi@131b0000 {
+		cros-ec@0 {
+			reg = <0>;
+			compatible = "google,cros-ec";
+			spi-max-frequency = <5000000>;
+			ec-interrupt = <&gpio 174 1>;
+			optimise-flash-write;
+			status = "disabled";
+		};
+	};
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 8cdc3b6..33fe822 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -30,6 +30,7 @@ COBJS-$(CONFIG_DS4510)  += ds4510.o
 COBJS-$(CONFIG_CBMEM_CONSOLE) += cbmem_console.o
 COBJS-$(CONFIG_GPIO_LED) += gpio_led.o
 COBJS-$(CONFIG_FSL_MC9SDZ60) += mc9sdz60.o
+COBJS-$(CONFIG_CROS_EC) += cros_ec.o
 COBJS-$(CONFIG_NS87308) += ns87308.o
 COBJS-$(CONFIG_PDSP188x) += pdsp188x.o
 COBJS-$(CONFIG_STATUS_LED) += status_led.o
diff --git a/drivers/misc/cros_ec.c b/drivers/misc/cros_ec.c
new file mode 100644
index 0000000..6e774d9
--- /dev/null
+++ b/drivers/misc/cros_ec.c
@@ -0,0 +1,1304 @@
+/*
+ * Chromium OS cros_ec driver
+ *
+ * Copyright (c) 2012 The Chromium OS Authors.
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * The Matrix Keyboard Protocol driver handles talking to the keyboard
+ * controller chip. Mostly this is for keyboard functions, but some other
+ * things have slipped in, so we provide generic services to talk to the
+ * KBC.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <i2c.h>
+#include <cros_ec.h>
+#include <fdtdec.h>
+#include <malloc.h>
+#include <spi.h>
+#include <asm/io.h>
+#include <asm-generic/gpio.h>
+
+#ifdef DEBUG_TRACE
+#define debug_trace(fmt, b...)	debug(fmt, #b)
+#else
+#define debug_trace(fmt, b...)
+#endif
+
+enum {
+	/* Timeout waiting for a flash erase command to complete */
+	CROS_EC_CMD_TIMEOUT_MS	= 5000,
+	/* Timeout waiting for a synchronous hash to be recomputed */
+	CROS_EC_CMD_HASH_TIMEOUT_MS = 2000,
+};
+
+static struct cros_ec_dev static_dev, *last_dev;
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Note: depends on enum ec_current_image */
+static const char * const ec_current_image_name[] = {"unknown", "RO", "RW"};
+
+void cros_ec_dump_data(const char *name, int cmd, const uint8_t *data, int len)
+{
+#ifdef DEBUG
+	int i;
+
+	printf("%s: ", name);
+	if (cmd != -1)
+		printf("cmd=%#x: ", cmd);
+	for (i = 0; i < len; i++)
+		printf("%02x ", data[i]);
+	printf("\n");
+#endif
+}
+
+/*
+ * Calculate a simple 8-bit checksum of a data block
+ *
+ * @param data	Data block to checksum
+ * @param size	Size of data block in bytes
+ * @return checksum value (0 to 255)
+ */
+int cros_ec_calc_checksum(const uint8_t *data, int size)
+{
+	int csum, i;
+
+	for (i = csum = 0; i < size; i++)
+		csum += data[i];
+	return csum & 0xff;
+}
+
+static int send_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version,
+			const void *dout, int dout_len,
+			uint8_t **dinp, int din_len)
+{
+	int ret;
+
+	switch (dev->interface) {
+#ifdef CONFIG_CROS_EC_SPI
+	case CROS_EC_IF_SPI:
+		ret = cros_ec_spi_command(dev, cmd, cmd_version,
+					(const uint8_t *)dout, dout_len,
+					dinp, din_len);
+		break;
+#endif
+#ifdef CONFIG_CROS_EC_I2C
+	case CROS_EC_IF_I2C:
+		ret = cros_ec_i2c_command(dev, cmd, cmd_version,
+					(const uint8_t *)dout, dout_len,
+					dinp, din_len);
+		break;
+#endif
+#ifdef CONFIG_CROS_EC_LPC
+	case CROS_EC_IF_LPC:
+		ret = cros_ec_lpc_command(dev, cmd, cmd_version,
+					(const uint8_t *)dout, dout_len,
+					dinp, din_len);
+		break;
+#endif
+	case CROS_EC_IF_NONE:
+	default:
+		ret = -1;
+	}
+
+	return ret;
+}
+
+/**
+ * Send a command to the CROS-EC device and return the reply.
+ *
+ * The device's internal input/output buffers are used.
+ *
+ * @param dev		CROS-EC device
+ * @param cmd		Command to send (EC_CMD_...)
+ * @param cmd_version	Version of command to send (EC_VER_...)
+ * @param dout          Output data (may be NULL If dout_len=0)
+ * @param dout_len      Size of output data in bytes
+ * @param dinp          Response data (may be NULL If din_len=0).
+ *			If not NULL, it will be updated to point to the data
+ *			and will always be double word aligned (64-bits)
+ * @param din_len       Maximum size of response in bytes
+ * @return number of bytes in response, or -1 on error
+ */
+static int ec_command_inptr(struct cros_ec_dev *dev, uint8_t cmd,
+		int cmd_version, const void *dout, int dout_len, uint8_t **dinp,
+		int din_len)
+{
+	uint8_t *din;
+	int len;
+
+	if (cmd_version != 0 && !dev->cmd_version_is_supported) {
+		debug("%s: Command version >0 unsupported\n", __func__);
+		return -1;
+	}
+	len = send_command(dev, cmd, cmd_version, dout, dout_len,
+				&din, din_len);
+
+	/* If the command doesn't complete, wait a while */
+	if (len == -EC_RES_IN_PROGRESS) {
+		struct ec_response_get_comms_status *resp;
+		ulong start;
+
+		/* Wait for command to complete */
+		start = get_timer(0);
+		do {
+			int ret;
+
+			mdelay(50);	/* Insert some reasonable delay */
+			ret = send_command(dev, EC_CMD_GET_COMMS_STATUS, 0,
+					NULL, 0,
+					(uint8_t **)&resp, sizeof(*resp));
+			if (ret < 0)
+				return ret;
+
+			if (get_timer(start) > CROS_EC_CMD_TIMEOUT_MS) {
+				debug("%s: Command %#02x timeout\n",
+				      __func__, cmd);
+				return -EC_RES_TIMEOUT;
+			}
+		} while (resp->flags & EC_COMMS_STATUS_PROCESSING);
+
+		/* OK it completed, so read the status response */
+		/* not sure why it was 0 for the last argument */
+		len = send_command(dev, EC_CMD_RESEND_RESPONSE, 0,
+				NULL, 0, &din, din_len);
+	}
+
+	debug("%s: len=%d, dinp=%p, *dinp=%p\n", __func__, len, dinp, *dinp);
+	if (dinp) {
+		/* If we have any data to return, it must be 64bit-aligned */
+		assert(len <= 0 || !((uintptr_t)din & 7));
+		*dinp = din;
+	}
+
+	return len;
+}
+
+/**
+ * Send a command to the CROS-EC device and return the reply.
+ *
+ * The device's internal input/output buffers are used.
+ *
+ * @param dev		CROS-EC device
+ * @param cmd		Command to send (EC_CMD_...)
+ * @param cmd_version	Version of command to send (EC_VER_...)
+ * @param dout          Output data (may be NULL If dout_len=0)
+ * @param dout_len      Size of output data in bytes
+ * @param din           Response data (may be NULL If din_len=0).
+ *			It not NULL, it is a place for ec_command() to copy the
+ *      data to.
+ * @param din_len       Maximum size of response in bytes
+ * @return number of bytes in response, or -1 on error
+ */
+static int ec_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version,
+		      const void *dout, int dout_len,
+		      void *din, int din_len)
+{
+	uint8_t *in_buffer;
+	int len;
+
+	assert((din_len == 0) || din);
+	len = ec_command_inptr(dev, cmd, cmd_version, dout, dout_len,
+			&in_buffer, din_len);
+	if (len > 0) {
+		/*
+		 * If we were asked to put it somewhere, do so, otherwise just
+		 * disregard the result.
+		 */
+		if (din && in_buffer) {
+			assert(len <= din_len);
+			memmove(din, in_buffer, len);
+		}
+	}
+	return len;
+}
+
+int cros_ec_scan_keyboard(struct cros_ec_dev *dev, struct mbkp_keyscan *scan)
+{
+	if (ec_command(dev, EC_CMD_CROS_EC_STATE, 0, NULL, 0, scan,
+		       sizeof(scan->data)) < sizeof(scan->data))
+		return -1;
+
+	return 0;
+}
+
+int cros_ec_read_id(struct cros_ec_dev *dev, char *id, int maxlen)
+{
+	struct ec_response_get_version *r;
+
+	if (ec_command_inptr(dev, EC_CMD_GET_VERSION, 0, NULL, 0,
+			(uint8_t **)&r, sizeof(*r)) < sizeof(*r))
+		return -1;
+
+	if (maxlen > sizeof(r->version_string_ro))
+		maxlen = sizeof(r->version_string_ro);
+
+	switch (r->current_image) {
+	case EC_IMAGE_RO:
+		memcpy(id, r->version_string_ro, maxlen);
+		break;
+	case EC_IMAGE_RW:
+		memcpy(id, r->version_string_rw, maxlen);
+		break;
+	default:
+		return -1;
+	}
+
+	id[maxlen - 1] = '\0';
+	return 0;
+}
+
+int cros_ec_read_version(struct cros_ec_dev *dev,
+		       struct ec_response_get_version **versionp)
+{
+	if (ec_command_inptr(dev, EC_CMD_GET_VERSION, 0, NULL, 0,
+			(uint8_t **)versionp, sizeof(**versionp))
+			< sizeof(**versionp))
+		return -1;
+
+	return 0;
+}
+
+int cros_ec_read_build_info(struct cros_ec_dev *dev, char **strp)
+{
+	if (ec_command_inptr(dev, EC_CMD_GET_BUILD_INFO, 0, NULL, 0,
+			(uint8_t **)strp, EC_HOST_PARAM_SIZE) < 0)
+		return -1;
+
+	return 0;
+}
+
+int cros_ec_read_current_image(struct cros_ec_dev *dev,
+		enum ec_current_image *image)
+{
+	struct ec_response_get_version *r;
+
+	if (ec_command_inptr(dev, EC_CMD_GET_VERSION, 0, NULL, 0,
+			(uint8_t **)&r, sizeof(*r)) < sizeof(*r))
+		return -1;
+
+	*image = r->current_image;
+	return 0;
+}
+
+static int cros_ec_wait_on_hash_done(struct cros_ec_dev *dev,
+				  struct ec_response_vboot_hash *hash)
+{
+	struct ec_params_vboot_hash p;
+	ulong start;
+
+	start = get_timer(0);
+	while (hash->status == EC_VBOOT_HASH_STATUS_BUSY) {
+		mdelay(50);	/* Insert some reasonable delay */
+
+		p.cmd = EC_VBOOT_HASH_GET;
+		if (ec_command(dev, EC_CMD_VBOOT_HASH, 0, &p, sizeof(p),
+		       hash, sizeof(*hash)) < 0)
+			return -1;
+
+		if (get_timer(start) > CROS_EC_CMD_HASH_TIMEOUT_MS) {
+			debug("%s: EC_VBOOT_HASH_GET timeout\n", __func__);
+			return -EC_RES_TIMEOUT;
+		}
+	}
+	return 0;
+}
+
+
+int cros_ec_read_hash(struct cros_ec_dev *dev,
+		struct ec_response_vboot_hash *hash)
+{
+	struct ec_params_vboot_hash p;
+	int rv;
+
+	p.cmd = EC_VBOOT_HASH_GET;
+	if (ec_command(dev, EC_CMD_VBOOT_HASH, 0, &p, sizeof(p),
+		       hash, sizeof(*hash)) < 0)
+		return -1;
+
+	/* If the EC is busy calculating the hash, fidget until it's done. */
+	rv = cros_ec_wait_on_hash_done(dev, hash);
+	if (rv)
+		return rv;
+
+	/* If the hash is valid, we're done. Otherwise, we have to kick it off
+	 * again and wait for it to complete. Note that we explicitly assume
+	 * that hashing zero bytes is always wrong, even though that would
+	 * produce a valid hash value. */
+	if (hash->status == EC_VBOOT_HASH_STATUS_DONE && hash->size)
+		return 0;
+
+	debug("%s: No valid hash (status=%d size=%d). Compute one...\n",
+	      __func__, hash->status, hash->size);
+
+	p.cmd = EC_VBOOT_HASH_RECALC;
+	p.hash_type = EC_VBOOT_HASH_TYPE_SHA256;
+	p.nonce_size = 0;
+	p.offset = EC_VBOOT_HASH_OFFSET_RW;
+
+	if (ec_command(dev, EC_CMD_VBOOT_HASH, 0, &p, sizeof(p),
+		       hash, sizeof(*hash)) < 0)
+		return -1;
+
+	rv = cros_ec_wait_on_hash_done(dev, hash);
+	if (rv)
+		return rv;
+
+	debug("%s: hash done\n", __func__);
+
+	return 0;
+}
+
+static int cros_ec_invalidate_hash(struct cros_ec_dev *dev)
+{
+	struct ec_params_vboot_hash p;
+	struct ec_response_vboot_hash *hash;
+
+	/* We don't have an explict command for the EC to discard its current
+	 * hash value, so we'll just tell it to calculate one that we know is
+	 * wrong (we claim that hashing zero bytes is always invalid).
+	 */
+	p.cmd = EC_VBOOT_HASH_RECALC;
+	p.hash_type = EC_VBOOT_HASH_TYPE_SHA256;
+	p.nonce_size = 0;
+	p.offset = 0;
+	p.size = 0;
+
+	debug("%s:\n", __func__);
+
+	if (ec_command_inptr(dev, EC_CMD_VBOOT_HASH, 0, &p, sizeof(p),
+		       (uint8_t **)&hash, sizeof(*hash)) < 0)
+		return -1;
+
+	/* No need to wait for it to finish */
+	return 0;
+}
+
+int cros_ec_reboot(struct cros_ec_dev *dev, enum ec_reboot_cmd cmd,
+		uint8_t flags)
+{
+	struct ec_params_reboot_ec p;
+
+	p.cmd = cmd;
+	p.flags = flags;
+
+	if (ec_command_inptr(dev, EC_CMD_REBOOT_EC, 0, &p, sizeof(p), NULL, 0)
+			< 0)
+		return -1;
+
+	if (!(flags & EC_REBOOT_FLAG_ON_AP_SHUTDOWN)) {
+		/*
+		 * EC reboot will take place immediately so delay to allow it
+		 * to complete.  Note that some reboot types (EC_REBOOT_COLD)
+		 * will reboot the AP as well, in which case we won't actually
+		 * get to this point.
+		 */
+		/*
+		 * TODO(rspangler@chromium.org): Would be nice if we had a
+		 * better way to determine when the reboot is complete.  Could
+		 * we poll a memory-mapped LPC value?
+		 */
+		udelay(50000);
+	}
+
+	return 0;
+}
+
+int cros_ec_interrupt_pending(struct cros_ec_dev *dev)
+{
+	/* no interrupt support : always poll */
+	if (!fdt_gpio_isvalid(&dev->ec_int))
+		return 1;
+
+	return !gpio_get_value(dev->ec_int.gpio);
+}
+
+int cros_ec_info(struct cros_ec_dev *dev, struct ec_response_cros_ec_info *info)
+{
+	if (ec_command(dev, EC_CMD_CROS_EC_INFO, 0, NULL, 0, info,
+			sizeof(*info)) < sizeof(*info))
+		return -1;
+
+	return 0;
+}
+
+int cros_ec_get_host_events(struct cros_ec_dev *dev, uint32_t *events_ptr)
+{
+	struct ec_response_host_event_mask *resp;
+
+	/*
+	 * Use the B copy of the event flags, because the main copy is already
+	 * used by ACPI/SMI.
+	 */
+	if (ec_command_inptr(dev, EC_CMD_HOST_EVENT_GET_B, 0, NULL, 0,
+		       (uint8_t **)&resp, sizeof(*resp)) < sizeof(*resp))
+		return -1;
+
+	if (resp->mask & EC_HOST_EVENT_MASK(EC_HOST_EVENT_INVALID))
+		return -1;
+
+	*events_ptr = resp->mask;
+	return 0;
+}
+
+int cros_ec_clear_host_events(struct cros_ec_dev *dev, uint32_t events)
+{
+	struct ec_params_host_event_mask params;
+
+	params.mask = events;
+
+	/*
+	 * Use the B copy of the event flags, so it affects the data returned
+	 * by cros_ec_get_host_events().
+	 */
+	if (ec_command_inptr(dev, EC_CMD_HOST_EVENT_CLEAR_B, 0,
+		       &params, sizeof(params), NULL, 0) < 0)
+		return -1;
+
+	return 0;
+}
+
+int cros_ec_flash_protect(struct cros_ec_dev *dev,
+		       uint32_t set_mask, uint32_t set_flags,
+		       struct ec_response_flash_protect *resp)
+{
+	struct ec_params_flash_protect params;
+
+	params.mask = set_mask;
+	params.flags = set_flags;
+
+	if (ec_command(dev, EC_CMD_FLASH_PROTECT, EC_VER_FLASH_PROTECT,
+		       &params, sizeof(params),
+		       resp, sizeof(*resp)) < sizeof(*resp))
+		return -1;
+
+	return 0;
+}
+
+static int cros_ec_check_version(struct cros_ec_dev *dev)
+{
+	struct ec_params_hello req;
+	struct ec_response_hello *resp;
+
+#ifdef CONFIG_CROS_EC_LPC
+	/* LPC has its own way of doing this */
+	if (dev->interface == CROS_EC_IF_LPC)
+		return cros_ec_lpc_check_version(dev);
+#endif
+
+	/*
+	 * TODO(sjg@chromium.org).
+	 * There is a strange oddity here with the EC. We could just ignore
+	 * the response, i.e. pass the last two parameters as NULL and 0.
+	 * In this case we won't read back very many bytes from the EC.
+	 * On the I2C bus the EC gets upset about this and will try to send
+	 * the bytes anyway. This means that we will have to wait for that
+	 * to complete before continuing with a new EC command.
+	 *
+	 * This problem is probably unique to the I2C bus.
+	 *
+	 * So for now, just read all the data anyway.
+	 */
+	dev->cmd_version_is_supported = 1;
+	if (ec_command_inptr(dev, EC_CMD_HELLO, 0, &req, sizeof(req),
+		       (uint8_t **)&resp, sizeof(*resp)) > 0) {
+		/* It appears to understand new version commands */
+		dev->cmd_version_is_supported = 1;
+	} else {
+		dev->cmd_version_is_supported = 0;
+		if (ec_command_inptr(dev, EC_CMD_HELLO, 0, &req,
+			      sizeof(req), (uint8_t **)&resp,
+			      sizeof(*resp)) < 0) {
+			debug("%s: Failed both old and new command style\n",
+				__func__);
+			return -1;
+		}
+	}
+
+	return 0;
+}
+
+int cros_ec_test(struct cros_ec_dev *dev)
+{
+	struct ec_params_hello req;
+	struct ec_response_hello *resp;
+
+	req.in_data = 0x12345678;
+	if (ec_command_inptr(dev, EC_CMD_HELLO, 0, &req, sizeof(req),
+		       (uint8_t **)&resp, sizeof(*resp)) < sizeof(*resp)) {
+		printf("ec_command_inptr() returned error\n");
+		return -1;
+	}
+	if (resp->out_data != req.in_data + 0x01020304) {
+		printf("Received invalid handshake %x\n", resp->out_data);
+		return -1;
+	}
+
+	return 0;
+}
+
+int cros_ec_flash_offset(struct cros_ec_dev *dev, enum ec_flash_region region,
+		      uint32_t *offset, uint32_t *size)
+{
+	struct ec_params_flash_region_info p;
+	struct ec_response_flash_region_info *r;
+	int ret;
+
+	p.region = region;
+	ret = ec_command_inptr(dev, EC_CMD_FLASH_REGION_INFO,
+			 EC_VER_FLASH_REGION_INFO,
+			 &p, sizeof(p), (uint8_t **)&r, sizeof(*r));
+	if (ret != sizeof(*r))
+		return -1;
+
+	if (offset)
+		*offset = r->offset;
+	if (size)
+		*size = r->size;
+
+	return 0;
+}
+
+int cros_ec_flash_erase(struct cros_ec_dev *dev, uint32_t offset, uint32_t size)
+{
+	struct ec_params_flash_erase p;
+
+	p.offset = offset;
+	p.size = size;
+	return ec_command_inptr(dev, EC_CMD_FLASH_ERASE, 0, &p, sizeof(p),
+			NULL, 0);
+}
+
+/**
+ * Write a single block to the flash
+ *
+ * Write a block of data to the EC flash. The size must not exceed the flash
+ * write block size which you can obtain from cros_ec_flash_write_burst_size().
+ *
+ * The offset starts at 0. You can obtain the region information from
+ * cros_ec_flash_offset() to find out where to write for a particular region.
+ *
+ * Attempting to write to the region where the EC is currently running from
+ * will result in an error.
+ *
+ * @param dev		CROS-EC device
+ * @param data		Pointer to data buffer to write
+ * @param offset	Offset within flash to write to.
+ * @param size		Number of bytes to write
+ * @return 0 if ok, -1 on error
+ */
+static int cros_ec_flash_write_block(struct cros_ec_dev *dev,
+		const uint8_t *data, uint32_t offset, uint32_t size)
+{
+	struct ec_params_flash_write p;
+
+	p.offset = offset;
+	p.size = size;
+	assert(data && p.size <= sizeof(p.data));
+	memcpy(p.data, data, p.size);
+
+	return ec_command_inptr(dev, EC_CMD_FLASH_WRITE, 0,
+			  &p, sizeof(p), NULL, 0) >= 0 ? 0 : -1;
+}
+
+/**
+ * Return optimal flash write burst size
+ */
+static int cros_ec_flash_write_burst_size(struct cros_ec_dev *dev)
+{
+	struct ec_params_flash_write p;
+	return sizeof(p.data);
+}
+
+/**
+ * Check if a block of data is erased (all 0xff)
+ *
+ * This function is useful when dealing with flash, for checking whether a
+ * data block is erased and thus does not need to be programmed.
+ *
+ * @param data		Pointer to data to check (must be word-aligned)
+ * @param size		Number of bytes to check (must be word-aligned)
+ * @return 0 if erased, non-zero if any word is not erased
+ */
+static int cros_ec_data_is_erased(const uint32_t *data, int size)
+{
+	assert(!(size & 3));
+	size /= sizeof(uint32_t);
+	for (; size > 0; size -= 4, data++)
+		if (*data != -1U)
+			return 0;
+
+	return 1;
+}
+
+int cros_ec_flash_write(struct cros_ec_dev *dev, const uint8_t *data,
+		     uint32_t offset, uint32_t size)
+{
+	uint32_t burst = cros_ec_flash_write_burst_size(dev);
+	uint32_t end, off;
+	int ret;
+
+	/*
+	 * TODO: round up to the nearest multiple of write size.  Can get away
+	 * without that on link right now because its write size is 4 bytes.
+	 */
+	end = offset + size;
+	for (off = offset; off < end; off += burst, data += burst) {
+		uint32_t todo;
+
+		/* If the data is empty, there is no point in programming it */
+		todo = min(end - off, burst);
+		if (dev->optimise_flash_write &&
+				cros_ec_data_is_erased((uint32_t *)data, todo))
+			continue;
+
+		ret = cros_ec_flash_write_block(dev, data, off, todo);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * Read a single block from the flash
+ *
+ * Read a block of data from the EC flash. The size must not exceed the flash
+ * write block size which you can obtain from cros_ec_flash_write_burst_size().
+ *
+ * The offset starts at 0. You can obtain the region information from
+ * cros_ec_flash_offset() to find out where to read for a particular region.
+ *
+ * @param dev		CROS-EC device
+ * @param data		Pointer to data buffer to read into
+ * @param offset	Offset within flash to read from
+ * @param size		Number of bytes to read
+ * @return 0 if ok, -1 on error
+ */
+static int cros_ec_flash_read_block(struct cros_ec_dev *dev, uint8_t *data,
+				 uint32_t offset, uint32_t size)
+{
+	struct ec_params_flash_read p;
+
+	p.offset = offset;
+	p.size = size;
+
+	return ec_command(dev, EC_CMD_FLASH_READ, 0,
+			  &p, sizeof(p), data, size) >= 0 ? 0 : -1;
+}
+
+int cros_ec_flash_read(struct cros_ec_dev *dev, uint8_t *data, uint32_t offset,
+		    uint32_t size)
+{
+	uint32_t burst = cros_ec_flash_write_burst_size(dev);
+	uint32_t end, off;
+	int ret;
+
+	end = offset + size;
+	for (off = offset; off < end; off += burst, data += burst) {
+		ret = cros_ec_flash_read_block(dev, data, off,
+					    min(end - off, burst));
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+int cros_ec_flash_update_rw(struct cros_ec_dev *dev,
+			 const uint8_t *image, int image_size)
+{
+	uint32_t rw_offset, rw_size;
+	int ret;
+
+	if (cros_ec_flash_offset(dev, EC_FLASH_REGION_RW, &rw_offset, &rw_size))
+		return -1;
+	if (image_size > rw_size)
+		return -1;
+
+	/* Invalidate the existing hash, just in case the AP reboots
+	 * unexpectedly during the update. If that happened, the EC RW firmware
+	 * would be invalid, but the EC would still have the original hash.
+	 */
+	ret = cros_ec_invalidate_hash(dev);
+	if (ret)
+		return ret;
+
+	/*
+	 * Erase the entire RW section, so that the EC doesn't see any garbage
+	 * past the new image if it's smaller than the current image.
+	 *
+	 * TODO: could optimize this to erase just the current image, since
+	 * presumably everything past that is 0xff's.  But would still need to
+	 * round up to the nearest multiple of erase size.
+	 */
+	ret = cros_ec_flash_erase(dev, rw_offset, rw_size);
+	if (ret)
+		return ret;
+
+	/* Write the image */
+	ret = cros_ec_flash_write(dev, image, rw_offset, image_size);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+int cros_ec_read_vbnvcontext(struct cros_ec_dev *dev, uint8_t *block)
+{
+	struct ec_params_vbnvcontext p;
+	int len;
+
+	p.op = EC_VBNV_CONTEXT_OP_READ;
+
+	len = ec_command(dev, EC_CMD_VBNV_CONTEXT, EC_VER_VBNV_CONTEXT,
+			&p, sizeof(p), block, EC_VBNV_BLOCK_SIZE);
+	if (len < EC_VBNV_BLOCK_SIZE)
+		return -1;
+
+	return 0;
+}
+
+int cros_ec_write_vbnvcontext(struct cros_ec_dev *dev, const uint8_t *block)
+{
+	struct ec_params_vbnvcontext p;
+	int len;
+
+	p.op = EC_VBNV_CONTEXT_OP_WRITE;
+	memcpy(p.block, block, sizeof(p.block));
+
+	len = ec_command_inptr(dev, EC_CMD_VBNV_CONTEXT, EC_VER_VBNV_CONTEXT,
+			&p, sizeof(p), NULL, 0);
+	if (len < 0)
+		return -1;
+
+	return 0;
+}
+
+int cros_ec_set_ldo(struct cros_ec_dev *dev, uint8_t index, uint8_t state)
+{
+	struct ec_params_ldo_set params;
+
+	params.index = index;
+	params.state = state;
+
+	if (ec_command_inptr(dev, EC_CMD_LDO_SET, 0,
+		       &params, sizeof(params),
+		       NULL, 0))
+		return -1;
+
+	return 0;
+}
+
+int cros_ec_get_ldo(struct cros_ec_dev *dev, uint8_t index, uint8_t *state)
+{
+	struct ec_params_ldo_get params;
+	struct ec_response_ldo_get *resp;
+
+	params.index = index;
+
+	if (ec_command_inptr(dev, EC_CMD_LDO_GET, 0,
+		       &params, sizeof(params),
+		       (uint8_t **)&resp, sizeof(*resp)) < sizeof(*resp))
+		return -1;
+
+	*state = resp->state;
+
+	return 0;
+}
+
+/**
+ * Decode MBKP details from the device tree and allocate a suitable device.
+ *
+ * @param blob		Device tree blob
+ * @param node		Node to decode from
+ * @param devp		Returns a pointer to the new allocated device
+ * @return 0 if ok, -1 on error
+ */
+static int cros_ec_decode_fdt(const void *blob, int node,
+		struct cros_ec_dev **devp)
+{
+	enum fdt_compat_id compat;
+	struct cros_ec_dev *dev;
+	int parent;
+
+	/* See what type of parent we are inside (this is expensive) */
+	parent = fdt_parent_offset(blob, node);
+	if (parent < 0) {
+		debug("%s: Cannot find node parent\n", __func__);
+		return -1;
+	}
+
+	dev = &static_dev;
+	dev->node = node;
+	dev->parent_node = parent;
+
+	compat = fdtdec_lookup(blob, parent);
+	switch (compat) {
+#ifdef CONFIG_CROS_EC_SPI
+	case COMPAT_SAMSUNG_EXYNOS_SPI:
+		dev->interface = CROS_EC_IF_SPI;
+		if (cros_ec_spi_decode_fdt(dev, blob))
+			return -1;
+		break;
+#endif
+#ifdef CONFIG_CROS_EC_I2C
+	case COMPAT_SAMSUNG_S3C2440_I2C:
+		dev->interface = CROS_EC_IF_I2C;
+		if (cros_ec_i2c_decode_fdt(dev, blob))
+			return -1;
+		break;
+#endif
+#ifdef CONFIG_CROS_EC_LPC
+	case COMPAT_INTEL_LPC:
+		dev->interface = CROS_EC_IF_LPC;
+		break;
+#endif
+	default:
+		debug("%s: Unknown compat id %d\n", __func__, compat);
+		return -1;
+	}
+
+	fdtdec_decode_gpio(blob, node, "ec-interrupt", &dev->ec_int);
+	dev->optimise_flash_write = fdtdec_get_bool(blob, node,
+						    "optimise-flash-write");
+	*devp = dev;
+
+	return 0;
+}
+
+int cros_ec_init(const void *blob, struct cros_ec_dev **cros_ecp)
+{
+	char id[MSG_BYTES];
+	struct cros_ec_dev *dev;
+	int node = 0;
+
+	*cros_ecp = NULL;
+	do {
+		node = fdtdec_next_compatible(blob, node,
+					      COMPAT_GOOGLE_CROS_EC);
+		if (node < 0) {
+			debug("%s: Node not found\n", __func__);
+			return 0;
+		}
+	} while (!fdtdec_get_is_enabled(blob, node));
+
+	if (cros_ec_decode_fdt(blob, node, &dev)) {
+		debug("%s: Failed to decode device.\n", __func__);
+		return -CROS_EC_ERR_FDT_DECODE;
+	}
+
+	switch (dev->interface) {
+#ifdef CONFIG_CROS_EC_SPI
+	case CROS_EC_IF_SPI:
+		if (cros_ec_spi_init(dev, blob)) {
+			debug("%s: Could not setup SPI interface\n", __func__);
+			return -CROS_EC_ERR_DEV_INIT;
+		}
+		break;
+#endif
+#ifdef CONFIG_CROS_EC_I2C
+	case CROS_EC_IF_I2C:
+		if (cros_ec_i2c_init(dev, blob))
+			return -CROS_EC_ERR_DEV_INIT;
+		break;
+#endif
+#ifdef CONFIG_CROS_EC_LPC
+	case CROS_EC_IF_LPC:
+		if (cros_ec_lpc_init(dev, blob))
+			return -CROS_EC_ERR_DEV_INIT;
+		break;
+#endif
+	case CROS_EC_IF_NONE:
+	default:
+		return 0;
+	}
+
+	/* we will poll the EC interrupt line */
+	fdtdec_setup_gpio(&dev->ec_int);
+	if (fdt_gpio_isvalid(&dev->ec_int))
+		gpio_direction_input(dev->ec_int.gpio);
+
+	if (cros_ec_check_version(dev)) {
+		debug("%s: Could not detect CROS-EC version\n", __func__);
+		return -CROS_EC_ERR_CHECK_VERSION;
+	}
+
+	if (cros_ec_read_id(dev, id, sizeof(id))) {
+		debug("%s: Could not read KBC ID\n", __func__);
+		return -CROS_EC_ERR_READ_ID;
+	}
+
+	/* Remember this device for use by the cros_ec command */
+	last_dev = *cros_ecp = dev;
+	debug("Google Chrome EC CROS-EC driver ready, id '%s'\n", id);
+
+	return 0;
+}
+
+#ifdef CONFIG_CMD_CROS_EC
+int cros_ec_decode_region(int argc, char * const argv[])
+{
+	if (argc > 0) {
+		if (0 == strcmp(*argv, "rw"))
+			return EC_FLASH_REGION_RW;
+		else if (0 == strcmp(*argv, "ro"))
+			return EC_FLASH_REGION_RO;
+
+		debug("%s: Invalid region '%s'\n", __func__, *argv);
+	} else {
+		debug("%s: Missing region parameter\n", __func__);
+	}
+
+	return -1;
+}
+
+/**
+ * Perform a flash read or write command
+ *
+ * @param dev		CROS-EC device to read/write
+ * @param is_write	1 do to a write, 0 to do a read
+ * @param argc		Number of arguments
+ * @param argv		Arguments (2 is region, 3 is address)
+ * @return 0 for ok, 1 for a usage error or -ve for ec command error
+ *	(negative EC_RES_...)
+ */
+static int do_read_write(struct cros_ec_dev *dev, int is_write, int argc,
+			 char * const argv[])
+{
+	uint32_t offset, size = -1U, region_size;
+	unsigned long addr;
+	char *endp;
+	int region;
+	int ret;
+
+	region = cros_ec_decode_region(argc - 2, argv + 2);
+	if (region == -1)
+		return 1;
+	if (argc < 4)
+		return 1;
+	addr = simple_strtoul(argv[3], &endp, 16);
+	if (*argv[3] == 0 || *endp != 0)
+		return 1;
+	if (argc > 4) {
+		size = simple_strtoul(argv[4], &endp, 16);
+		if (*argv[4] == 0 || *endp != 0)
+			return 1;
+	}
+
+	ret = cros_ec_flash_offset(dev, region, &offset, &region_size);
+	if (ret) {
+		debug("%s: Could not read region info\n", __func__);
+		return ret;
+	}
+	if (size == -1U)
+		size = region_size;
+
+	ret = is_write ?
+		cros_ec_flash_write(dev, (uint8_t *)addr, offset, size) :
+		cros_ec_flash_read(dev, (uint8_t *)addr, offset, size);
+	if (ret) {
+		debug("%s: Could not %s region\n", __func__,
+		      is_write ? "write" : "read");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int do_cros_ec(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	struct cros_ec_dev *dev = last_dev;
+	const char *cmd;
+	int ret = 0;
+
+	if (argc < 2)
+		return CMD_RET_USAGE;
+
+	cmd = argv[1];
+	if (0 == strcmp("init", cmd)) {
+		ret = cros_ec_init(gd->fdt_blob, &dev);
+		if (ret) {
+			printf("Could not init cros_ec device (err %d)\n", ret);
+			return 1;
+		}
+		return 0;
+	}
+
+	/* Just use the last allocated device; there should be only one */
+	if (!last_dev) {
+		printf("No CROS-EC device available\n");
+		return 1;
+	}
+	if (0 == strcmp("id", cmd)) {
+		char id[MSG_BYTES];
+
+		if (cros_ec_read_id(dev, id, sizeof(id))) {
+			debug("%s: Could not read KBC ID\n", __func__);
+			return 1;
+		}
+		printf("%s\n", id);
+	} else if (0 == strcmp("info", cmd)) {
+		struct ec_response_cros_ec_info info;
+
+		if (cros_ec_info(dev, &info)) {
+			debug("%s: Could not read KBC info\n", __func__);
+			return 1;
+		}
+		printf("rows     = %u\n", info.rows);
+		printf("cols     = %u\n", info.cols);
+		printf("switches = %#x\n", info.switches);
+	} else if (0 == strcmp("curimage", cmd)) {
+		enum ec_current_image image;
+
+		if (cros_ec_read_current_image(dev, &image)) {
+			debug("%s: Could not read KBC image\n", __func__);
+			return 1;
+		}
+		printf("%d\n", image);
+	} else if (0 == strcmp("hash", cmd)) {
+		struct ec_response_vboot_hash hash;
+		int i;
+
+		if (cros_ec_read_hash(dev, &hash)) {
+			debug("%s: Could not read KBC hash\n", __func__);
+			return 1;
+		}
+
+		if (hash.hash_type == EC_VBOOT_HASH_TYPE_SHA256)
+			printf("type:    SHA-256\n");
+		else
+			printf("type:    %d\n", hash.hash_type);
+
+		printf("offset:  0x%08x\n", hash.offset);
+		printf("size:    0x%08x\n", hash.size);
+
+		printf("digest:  ");
+		for (i = 0; i < hash.digest_size; i++)
+			printf("%02x", hash.hash_digest[i]);
+		printf("\n");
+	} else if (0 == strcmp("reboot", cmd)) {
+		int region;
+		enum ec_reboot_cmd cmd;
+
+		if (argc >= 3 && !strcmp(argv[2], "cold"))
+			cmd = EC_REBOOT_COLD;
+		else {
+			region = cros_ec_decode_region(argc - 2, argv + 2);
+			if (region == EC_FLASH_REGION_RO)
+				cmd = EC_REBOOT_JUMP_RO;
+			else if (region == EC_FLASH_REGION_RW)
+				cmd = EC_REBOOT_JUMP_RW;
+			else
+				return CMD_RET_USAGE;
+		}
+
+		if (cros_ec_reboot(dev, cmd, 0)) {
+			debug("%s: Could not reboot KBC\n", __func__);
+			return 1;
+		}
+	} else if (0 == strcmp("events", cmd)) {
+		uint32_t events;
+
+		if (cros_ec_get_host_events(dev, &events)) {
+			debug("%s: Could not read host events\n", __func__);
+			return 1;
+		}
+		printf("0x%08x\n", events);
+	} else if (0 == strcmp("clrevents", cmd)) {
+		uint32_t events = 0x7fffffff;
+
+		if (argc >= 3)
+			events = simple_strtol(argv[2], NULL, 0);
+
+		if (cros_ec_clear_host_events(dev, events)) {
+			debug("%s: Could not clear host events\n", __func__);
+			return 1;
+		}
+	} else if (0 == strcmp("read", cmd)) {
+		ret = do_read_write(dev, 0, argc, argv);
+		if (ret > 0)
+			return CMD_RET_USAGE;
+	} else if (0 == strcmp("write", cmd)) {
+		ret = do_read_write(dev, 1, argc, argv);
+		if (ret > 0)
+			return CMD_RET_USAGE;
+	} else if (0 == strcmp("erase", cmd)) {
+		int region = cros_ec_decode_region(argc - 2, argv + 2);
+		uint32_t offset, size;
+
+		if (region == -1)
+			return CMD_RET_USAGE;
+		if (cros_ec_flash_offset(dev, region, &offset, &size)) {
+			debug("%s: Could not read region info\n", __func__);
+			ret = -1;
+		} else {
+			ret = cros_ec_flash_erase(dev, offset, size);
+			if (ret) {
+				debug("%s: Could not erase region\n",
+				      __func__);
+			}
+		}
+	} else if (0 == strcmp("regioninfo", cmd)) {
+		int region = cros_ec_decode_region(argc - 2, argv + 2);
+		uint32_t offset, size;
+
+		if (region == -1)
+			return CMD_RET_USAGE;
+		ret = cros_ec_flash_offset(dev, region, &offset, &size);
+		if (ret) {
+			debug("%s: Could not read region info\n", __func__);
+		} else {
+			printf("Region: %s\n", region == EC_FLASH_REGION_RO ?
+					"RO" : "RW");
+			printf("Offset: %x\n", offset);
+			printf("Size:   %x\n", size);
+		}
+	} else if (0 == strcmp("vbnvcontext", cmd)) {
+		uint8_t block[EC_VBNV_BLOCK_SIZE];
+		char buf[3];
+		int i, len;
+		unsigned long result;
+
+		if (argc <= 2) {
+			ret = cros_ec_read_vbnvcontext(dev, block);
+			if (!ret) {
+				printf("vbnv_block: ");
+				for (i = 0; i < EC_VBNV_BLOCK_SIZE; i++)
+					printf("%02x", block[i]);
+				putc('\n');
+			}
+		} else {
+			/*
+			 * TODO(clchiou): Move this to a utility function as
+			 * cmd_spi might want to call it.
+			 */
+			memset(block, 0, EC_VBNV_BLOCK_SIZE);
+			len = strlen(argv[2]);
+			buf[2] = '\0';
+			for (i = 0; i < EC_VBNV_BLOCK_SIZE; i++) {
+				if (i * 2 >= len)
+					break;
+				buf[0] = argv[2][i * 2];
+				if (i * 2 + 1 >= len)
+					buf[1] = '0';
+				else
+					buf[1] = argv[2][i * 2 + 1];
+				strict_strtoul(buf, 16, &result);
+				block[i] = result;
+			}
+			ret = cros_ec_write_vbnvcontext(dev, block);
+		}
+		if (ret) {
+			debug("%s: Could not %s VbNvContext\n", __func__,
+					argc <= 2 ?  "read" : "write");
+		}
+	} else if (0 == strcmp("test", cmd)) {
+		int result = cros_ec_test(dev);
+
+		if (result)
+			printf("Test failed with error %d\n", result);
+		else
+			puts("Test passed\n");
+	} else if (0 == strcmp("version", cmd)) {
+		struct ec_response_get_version *p;
+		char *build_string;
+
+		ret = cros_ec_read_version(dev, &p);
+		if (!ret) {
+			/* Print versions */
+			printf("RO version:    %1.*s\n",
+			       sizeof(p->version_string_ro),
+			       p->version_string_ro);
+			printf("RW version:    %1.*s\n",
+			       sizeof(p->version_string_rw),
+			       p->version_string_rw);
+			printf("Firmware copy: %s\n",
+				(p->current_image <
+					ARRAY_SIZE(ec_current_image_name) ?
+				ec_current_image_name[p->current_image] :
+				"?"));
+			ret = cros_ec_read_build_info(dev, &build_string);
+			if (!ret)
+				printf("Build info:    %s\n", build_string);
+		}
+	} else if (0 == strcmp("ldo", cmd)) {
+		uint8_t index, state;
+		char *endp;
+
+		if (argc < 3)
+			return CMD_RET_USAGE;
+		index = simple_strtoul(argv[2], &endp, 10);
+		if (*argv[2] == 0 || *endp != 0)
+			return CMD_RET_USAGE;
+		if (argc > 3) {
+			state = simple_strtoul(argv[3], &endp, 10);
+			if (*argv[3] == 0 || *endp != 0)
+				return CMD_RET_USAGE;
+			ret = cros_ec_set_ldo(dev, index, state);
+		} else {
+			ret = cros_ec_get_ldo(dev, index, &state);
+			if (!ret) {
+				printf("LDO%d: %s\n", index,
+					state == EC_LDO_STATE_ON ?
+					"on" : "off");
+			}
+		}
+
+		if (ret) {
+			debug("%s: Could not access LDO%d\n", __func__, index);
+			return ret;
+		}
+	} else {
+		return CMD_RET_USAGE;
+	}
+
+	if (ret < 0) {
+		printf("Error: CROS-EC command failed (error %d)\n", ret);
+		ret = 1;
+	}
+
+	return ret;
+}
+
+U_BOOT_CMD(
+	crosec,	5,	1,	do_cros_ec,
+	"CROS-EC utility command",
+	"init                Re-init CROS-EC (done on startup automatically)\n"
+	"crosec id                  Read CROS-EC ID\n"
+	"crosec info                Read CROS-EC info\n"
+	"crosec curimage            Read CROS-EC current image\n"
+	"crosec hash                Read CROS-EC hash\n"
+	"crosec reboot [rw | ro | cold]  Reboot CROS-EC\n"
+	"crosec events              Read CROS-EC host events\n"
+	"crosec clrevents [mask]    Clear CROS-EC host events\n"
+	"crosec regioninfo <ro|rw>  Read image info\n"
+	"crosec erase <ro|rw>       Erase EC image\n"
+	"crosec read <ro|rw> <addr> [<size>]   Read EC image\n"
+	"crosec write <ro|rw> <addr> [<size>]  Write EC image\n"
+	"crosec vbnvcontext [hexstring]        Read [write] VbNvContext from EC\n"
+	"crosec ldo <idx> [<state>] Switch/Read LDO state\n"
+	"crosec test                run tests on cros_ec\n"
+	"crosec version             Read CROS-EC version"
+);
+#endif
diff --git a/include/cros_ec.h b/include/cros_ec.h
new file mode 100644
index 0000000..335d5b4
--- /dev/null
+++ b/include/cros_ec.h
@@ -0,0 +1,449 @@
+/*
+ * Chromium OS cros_ec driver
+ *
+ * Copyright (c) 2012 The Chromium OS Authors.
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _CROS_EC_H
+#define _CROS_EC_H
+
+#include <linux/compiler.h>
+#include <ec_commands.h>
+#include <fdtdec.h>
+#include <cros_ec_message.h>
+
+/* Which interface is the device on? */
+enum cros_ec_interface_t {
+	CROS_EC_IF_NONE,
+	CROS_EC_IF_SPI,
+	CROS_EC_IF_I2C,
+	CROS_EC_IF_LPC,	/* Intel Low Pin Count interface */
+};
+
+/* Our configuration information */
+struct cros_ec_dev {
+	enum cros_ec_interface_t interface;
+	struct spi_slave *spi;		/* Our SPI slave, if using SPI */
+	int node;                       /* Our node */
+	int parent_node;		/* Our parent node (interface) */
+	unsigned int cs;		/* Our chip select */
+	unsigned int addr;		/* Device address (for I2C) */
+	unsigned int bus_num;		/* Bus number (for I2C) */
+	unsigned int max_frequency;	/* Maximum interface frequency */
+	struct fdt_gpio_state ec_int;	/* GPIO used as EC interrupt line */
+	int cmd_version_is_supported;   /* Device supports command versions */
+	int optimise_flash_write;	/* Don't write erased flash blocks */
+
+	/*
+	 * These two buffers will always be dword-aligned and include enough
+	 * space for up to 7 word-alignment bytes also, so we can ensure that
+	 * the body of the message is always dword-aligned (64-bit).
+	 *
+	 * We use this alignment to keep ARM and x86 happy. Probably word
+	 * alignment would be OK, there might be a small performance advantage
+	 * to using dword.
+	 */
+	uint8_t din[ALIGN(MSG_BYTES + sizeof(int64_t), sizeof(int64_t))]
+		__aligned(sizeof(int64_t));
+	uint8_t dout[ALIGN(MSG_BYTES + sizeof(int64_t), sizeof(int64_t))]
+		__aligned(sizeof(int64_t));
+};
+
+/*
+ * Hard-code the number of columns we happen to know we have right now.  It
+ * would be more correct to call cros_ec_info() at startup and determine the
+ * actual number of keyboard cols from there.
+ */
+#define CROS_EC_KEYSCAN_COLS 13
+
+/* Information returned by a key scan */
+struct mbkp_keyscan {
+	uint8_t data[CROS_EC_KEYSCAN_COLS];
+};
+
+/**
+ * Read the ID of the CROS-EC device
+ *
+ * The ID is a string identifying the CROS-EC device.
+ *
+ * @param dev		CROS-EC device
+ * @param id		Place to put the ID
+ * @param maxlen	Maximum length of the ID field
+ * @return 0 if ok, -1 on error
+ */
+int cros_ec_read_id(struct cros_ec_dev *dev, char *id, int maxlen);
+
+/**
+ * Read a keyboard scan from the CROS-EC device
+ *
+ * Send a message requesting a keyboard scan and return the result
+ *
+ * @param dev		CROS-EC device
+ * @param scan		Place to put the scan results
+ * @return 0 if ok, -1 on error
+ */
+int cros_ec_scan_keyboard(struct cros_ec_dev *dev, struct mbkp_keyscan *scan);
+
+/**
+ * Read which image is currently running on the CROS-EC device.
+ *
+ * @param dev		CROS-EC device
+ * @param image		Destination for image identifier
+ * @return 0 if ok, <0 on error
+ */
+int cros_ec_read_current_image(struct cros_ec_dev *dev,
+		enum ec_current_image *image);
+
+/**
+ * Read the hash of the CROS-EC device firmware.
+ *
+ * @param dev		CROS-EC device
+ * @param hash		Destination for hash information
+ * @return 0 if ok, <0 on error
+ */
+int cros_ec_read_hash(struct cros_ec_dev *dev,
+		struct ec_response_vboot_hash *hash);
+
+/**
+ * Send a reboot command to the CROS-EC device.
+ *
+ * Note that some reboot commands (such as EC_REBOOT_COLD) also reboot the AP.
+ *
+ * @param dev		CROS-EC device
+ * @param cmd		Reboot command
+ * @param flags         Flags for reboot command (EC_REBOOT_FLAG_*)
+ * @return 0 if ok, <0 on error
+ */
+int cros_ec_reboot(struct cros_ec_dev *dev, enum ec_reboot_cmd cmd,
+		uint8_t flags);
+
+/**
+ * Check if the CROS-EC device has an interrupt pending.
+ *
+ * Read the status of the external interrupt connected to the CROS-EC device.
+ * If no external interrupt is configured, this always returns 1.
+ *
+ * @param dev		CROS-EC device
+ * @return 0 if no interrupt is pending
+ */
+int cros_ec_interrupt_pending(struct cros_ec_dev *dev);
+
+enum {
+	CROS_EC_OK,
+	CROS_EC_ERR = 1,
+	CROS_EC_ERR_FDT_DECODE,
+	CROS_EC_ERR_CHECK_VERSION,
+	CROS_EC_ERR_READ_ID,
+	CROS_EC_ERR_DEV_INIT,
+};
+
+/**
+ * Set up the Chromium OS matrix keyboard protocol
+ *
+ * @param blob		Device tree blob containing setup information
+ * @param cros_ecp        Returns pointer to the cros_ec device, or NULL if none
+ * @return 0 if we got an cros_ec device and all is well (or no cros_ec is
+ *	expected), -ve if we should have an cros_ec device but failed to find
+ *	one, or init failed (-CROS_EC_ERR_...).
+ */
+int cros_ec_init(const void *blob, struct cros_ec_dev **cros_ecp);
+
+/**
+ * Read information about the keyboard matrix
+ *
+ * @param dev		CROS-EC device
+ * @param info		Place to put the info structure
+ */
+int cros_ec_info(struct cros_ec_dev *dev,
+		struct ec_response_cros_ec_info *info);
+
+/**
+ * Read the host event flags
+ *
+ * @param dev		CROS-EC device
+ * @param events_ptr	Destination for event flags.  Not changed on error.
+ * @return 0 if ok, <0 on error
+ */
+int cros_ec_get_host_events(struct cros_ec_dev *dev, uint32_t *events_ptr);
+
+/**
+ * Clear the specified host event flags
+ *
+ * @param dev		CROS-EC device
+ * @param events	Event flags to clear
+ * @return 0 if ok, <0 on error
+ */
+int cros_ec_clear_host_events(struct cros_ec_dev *dev, uint32_t events);
+
+/**
+ * Get/set flash protection
+ *
+ * @param dev		CROS-EC device
+ * @param set_mask	Mask of flags to set; if 0, just retrieves existing
+ *                      protection state without changing it.
+ * @param set_flags	New flag values; only bits in set_mask are applied;
+ *                      ignored if set_mask=0.
+ * @param prot          Destination for updated protection state from EC.
+ * @return 0 if ok, <0 on error
+ */
+int cros_ec_flash_protect(struct cros_ec_dev *dev,
+		       uint32_t set_mask, uint32_t set_flags,
+		       struct ec_response_flash_protect *resp);
+
+
+/**
+ * Run internal tests on the cros_ec interface.
+ *
+ * @param dev		CROS-EC device
+ * @return 0 if ok, <0 if the test failed
+ */
+int cros_ec_test(struct cros_ec_dev *dev);
+
+/**
+ * Update the EC RW copy.
+ *
+ * @param dev		CROS-EC device
+ * @param image		the content to write
+ * @param imafge_size	content length
+ * @return 0 if ok, <0 if the test failed
+ */
+int cros_ec_flash_update_rw(struct cros_ec_dev *dev,
+			 const uint8_t  *image, int image_size);
+
+/**
+ * Return a pointer to the board's CROS-EC device
+ *
+ * This should be implemented by board files.
+ *
+ * @return pointer to CROS-EC device, or NULL if none is available
+ */
+struct cros_ec_dev *board_get_cros_ec_dev(void);
+
+
+/* Internal interfaces */
+int cros_ec_i2c_init(struct cros_ec_dev *dev, const void *blob);
+int cros_ec_spi_init(struct cros_ec_dev *dev, const void *blob);
+int cros_ec_lpc_init(struct cros_ec_dev *dev, const void *blob);
+
+/**
+ * Read information from the fdt for the i2c cros_ec interface
+ *
+ * @param dev		CROS-EC device
+ * @param blob		Device tree blob
+ * @return 0 if ok, -1 if we failed to read all required information
+ */
+int cros_ec_i2c_decode_fdt(struct cros_ec_dev *dev, const void *blob);
+
+/**
+ * Read information from the fdt for the spi cros_ec interface
+ *
+ * @param dev		CROS-EC device
+ * @param blob		Device tree blob
+ * @return 0 if ok, -1 if we failed to read all required information
+ */
+int cros_ec_spi_decode_fdt(struct cros_ec_dev *dev, const void *blob);
+
+/**
+ * Check whether the LPC interface supports new-style commands.
+ *
+ * LPC has its own way of doing this, which involves checking LPC values
+ * visible to the host. Do this, and update dev->cmd_version_is_supported
+ * accordingly.
+ *
+ * @param dev		CROS-EC device to check
+ */
+int cros_ec_lpc_check_version(struct cros_ec_dev *dev);
+
+/**
+ * Send a command to an I2C CROS-EC device and return the reply.
+ *
+ * This rather complicated function deals with sending both old-style and
+ * new-style commands. The old ones have just a command byte and arguments.
+ * The new ones have version, command, arg-len, [args], chksum so are 3 bytes
+ * longer.
+ *
+ * The device's internal input/output buffers are used.
+ *
+ * @param dev		CROS-EC device
+ * @param cmd		Command to send (EC_CMD_...)
+ * @param cmd_version	Version of command to send (EC_VER_...)
+ * @param dout          Output data (may be NULL If dout_len=0)
+ * @param dout_len      Size of output data in bytes
+ * @param dinp          Returns pointer to response data
+ * @param din_len       Maximum size of response in bytes
+ * @return number of bytes in response, or -1 on error
+ */
+int cros_ec_i2c_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version,
+		     const uint8_t *dout, int dout_len,
+		     uint8_t **dinp, int din_len);
+
+/**
+ * Send a command to a LPC CROS-EC device and return the reply.
+ *
+ * The device's internal input/output buffers are used.
+ *
+ * @param dev		CROS-EC device
+ * @param cmd		Command to send (EC_CMD_...)
+ * @param cmd_version	Version of command to send (EC_VER_...)
+ * @param dout          Output data (may be NULL If dout_len=0)
+ * @param dout_len      Size of output data in bytes
+ * @param dinp          Returns pointer to response data
+ * @param din_len       Maximum size of response in bytes
+ * @return number of bytes in response, or -1 on error
+ */
+int cros_ec_lpc_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version,
+		     const uint8_t *dout, int dout_len,
+		     uint8_t **dinp, int din_len);
+
+int cros_ec_spi_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version,
+		     const uint8_t *dout, int dout_len,
+		     uint8_t **dinp, int din_len);
+
+/**
+ * Dump a block of data for a command.
+ *
+ * @param name	Name for data (e.g. 'in', 'out')
+ * @param cmd	Command number associated with data, or -1 for none
+ * @param data	Data block to dump
+ * @param len	Length of data block to dump
+ */
+void cros_ec_dump_data(const char *name, int cmd, const uint8_t *data, int len);
+
+/**
+ * Calculate a simple 8-bit checksum of a data block
+ *
+ * @param data	Data block to checksum
+ * @param size	Size of data block in bytes
+ * @return checksum value (0 to 255)
+ */
+int cros_ec_calc_checksum(const uint8_t *data, int size);
+
+/**
+ * Decode a flash region parameter
+ *
+ * @param argc	Number of params remaining
+ * @param argv	List of remaining parameters
+ * @return flash region (EC_FLASH_REGION_...) or -1 on error
+ */
+int cros_ec_decode_region(int argc, char * const argv[]);
+
+int cros_ec_flash_erase(struct cros_ec_dev *dev, uint32_t offset,
+		uint32_t size);
+
+/**
+ * Read data from the flash
+ *
+ * Read an arbitrary amount of data from the EC flash, by repeatedly reading
+ * small blocks.
+ *
+ * The offset starts at 0. You can obtain the region information from
+ * cros_ec_flash_offset() to find out where to read for a particular region.
+ *
+ * @param dev		CROS-EC device
+ * @param data		Pointer to data buffer to read into
+ * @param offset	Offset within flash to read from
+ * @param size		Number of bytes to read
+ * @return 0 if ok, -1 on error
+ */
+int cros_ec_flash_read(struct cros_ec_dev *dev, uint8_t *data, uint32_t offset,
+		    uint32_t size);
+
+/**
+ * Write data to the flash
+ *
+ * Write an arbitrary amount of data to the EC flash, by repeatedly writing
+ * small blocks.
+ *
+ * The offset starts at 0. You can obtain the region information from
+ * cros_ec_flash_offset() to find out where to write for a particular region.
+ *
+ * Attempting to write to the region where the EC is currently running from
+ * will result in an error.
+ *
+ * @param dev		CROS-EC device
+ * @param data		Pointer to data buffer to write
+ * @param offset	Offset within flash to write to.
+ * @param size		Number of bytes to write
+ * @return 0 if ok, -1 on error
+ */
+int cros_ec_flash_write(struct cros_ec_dev *dev, const uint8_t *data,
+		     uint32_t offset, uint32_t size);
+
+/**
+ * Obtain position and size of a flash region
+ *
+ * @param dev		CROS-EC device
+ * @param region	Flash region to query
+ * @param offset	Returns offset of flash region in EC flash
+ * @param size		Returns size of flash region
+ * @return 0 if ok, -1 on error
+ */
+int cros_ec_flash_offset(struct cros_ec_dev *dev, enum ec_flash_region region,
+		      uint32_t *offset, uint32_t *size);
+
+/**
+ * Read/write VbNvContext from/to a CROS-EC device.
+ *
+ * @param dev		CROS-EC device
+ * @param block		Buffer of VbNvContext to be read/write
+ * @return 0 if ok, -1 on error
+ */
+int cros_ec_read_vbnvcontext(struct cros_ec_dev *dev, uint8_t *block);
+int cros_ec_write_vbnvcontext(struct cros_ec_dev *dev, const uint8_t *block);
+
+/**
+ * Read the version information for the EC images
+ *
+ * @param dev		CROS-EC device
+ * @param versionp	This is set to point to the version information
+ * @return 0 if ok, -1 on error
+ */
+int cros_ec_read_version(struct cros_ec_dev *dev,
+		       struct ec_response_get_version **versionp);
+
+/**
+ * Read the build information for the EC
+ *
+ * @param dev		CROS-EC device
+ * @param versionp	This is set to point to the build string
+ * @return 0 if ok, -1 on error
+ */
+int cros_ec_read_build_info(struct cros_ec_dev *dev, char **strp);
+
+/**
+ * Switch on/off a LDO / FET.
+ *
+ * @param dev		CROS-EC device
+ * @param index		index of the LDO/FET to switch
+ * @param state		new state of the LDO/FET : EC_LDO_STATE_ON|OFF
+ * @return 0 if ok, -1 on error
+ */
+int cros_ec_set_ldo(struct cros_ec_dev *dev, uint8_t index, uint8_t state);
+
+/**
+ * Read back a LDO / FET current state.
+ *
+ * @param dev		CROS-EC device
+ * @param index		index of the LDO/FET to switch
+ * @param state		current state of the LDO/FET : EC_LDO_STATE_ON|OFF
+ * @return 0 if ok, -1 on error
+ */
+int cros_ec_get_ldo(struct cros_ec_dev *dev, uint8_t index, uint8_t *state);
+#endif
diff --git a/include/cros_ec_message.h b/include/cros_ec_message.h
new file mode 100644
index 0000000..a2421c7
--- /dev/null
+++ b/include/cros_ec_message.h
@@ -0,0 +1,44 @@
+/*
+ * Chromium OS Matrix Keyboard Message Protocol definitions
+ *
+ * Copyright (c) 2012 The Chromium OS Authors.
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _CROS_MESSAGE_H
+#define _CROS_MESSAGE_H
+
+/*
+ * Command interface between EC and AP, for LPC, I2C and SPI interfaces.
+ *
+ * This is copied from the Chromium OS Open Source Embedded Controller code.
+ */
+enum {
+	/* The header byte, which follows the preamble */
+	MSG_HEADER	= 0xec,
+
+	MSG_HEADER_BYTES	= 3,
+	MSG_TRAILER_BYTES	= 2,
+	MSG_PROTO_BYTES		= MSG_HEADER_BYTES + MSG_TRAILER_BYTES,
+
+	/* Max length of messages */
+	MSG_BYTES		= EC_HOST_PARAM_SIZE + MSG_PROTO_BYTES,
+};
+
+#endif
diff --git a/include/ec_commands.h b/include/ec_commands.h
new file mode 100644
index 0000000..12811cc
--- /dev/null
+++ b/include/ec_commands.h
@@ -0,0 +1,1440 @@
+/* Copyright (c) 2012 The Chromium OS Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ */
+
+/* Host communication command constants for Chrome EC */
+
+#ifndef __CROS_EC_COMMANDS_H
+#define __CROS_EC_COMMANDS_H
+
+/*
+ * Protocol overview
+ *
+ * request:  CMD [ P0 P1 P2 ... Pn S ]
+ * response: ERR [ P0 P1 P2 ... Pn S ]
+ *
+ * where the bytes are defined as follow :
+ *      - CMD is the command code. (defined by EC_CMD_ constants)
+ *      - ERR is the error code. (defined by EC_RES_ constants)
+ *      - Px is the optional payload.
+ *        it is not sent if the error code is not success.
+ *        (defined by ec_params_ and ec_response_ structures)
+ *      - S is the checksum which is the sum of all payload bytes.
+ *
+ * On LPC, CMD and ERR are sent/received at EC_LPC_ADDR_KERNEL|USER_CMD
+ * and the payloads are sent/received at EC_LPC_ADDR_KERNEL|USER_PARAM.
+ * On I2C, all bytes are sent serially in the same message.
+ */
+
+/* Current version of this protocol */
+#define EC_PROTO_VERSION          0x00000002
+
+/* Command version mask */
+#define EC_VER_MASK(version) (1UL << (version))
+
+/* I/O addresses for ACPI commands */
+#define EC_LPC_ADDR_ACPI_DATA  0x62
+#define EC_LPC_ADDR_ACPI_CMD   0x66
+
+/* I/O addresses for host command */
+#define EC_LPC_ADDR_HOST_DATA  0x200
+#define EC_LPC_ADDR_HOST_CMD   0x204
+
+/* I/O addresses for host command args and params */
+#define EC_LPC_ADDR_HOST_ARGS  0x800
+#define EC_LPC_ADDR_HOST_PARAM 0x804
+#define EC_HOST_PARAM_SIZE     0x0fc  /* Size of param area in bytes */
+
+/* I/O addresses for host command params, old interface */
+#define EC_LPC_ADDR_OLD_PARAM  0x880
+#define EC_OLD_PARAM_SIZE      0x080  /* Size of param area in bytes */
+
+/* EC command register bit functions */
+#define EC_LPC_CMDR_DATA	(1 << 0)  /* Data ready for host to read */
+#define EC_LPC_CMDR_PENDING	(1 << 1)  /* Write pending to EC */
+#define EC_LPC_CMDR_BUSY	(1 << 2)  /* EC is busy processing a command */
+#define EC_LPC_CMDR_CMD		(1 << 3)  /* Last host write was a command */
+#define EC_LPC_CMDR_ACPI_BRST	(1 << 4)  /* Burst mode (not used) */
+#define EC_LPC_CMDR_SCI		(1 << 5)  /* SCI event is pending */
+#define EC_LPC_CMDR_SMI		(1 << 6)  /* SMI event is pending */
+
+#define EC_LPC_ADDR_MEMMAP       0x900
+#define EC_MEMMAP_SIZE         255 /* ACPI IO buffer max is 255 bytes */
+#define EC_MEMMAP_TEXT_MAX     8   /* Size of a string in the memory map */
+
+/* The offset address of each type of data in mapped memory. */
+#define EC_MEMMAP_TEMP_SENSOR      0x00 /* Temp sensors */
+#define EC_MEMMAP_FAN              0x10 /* Fan speeds */
+#define EC_MEMMAP_TEMP_SENSOR_B    0x18 /* Temp sensors (second set) */
+#define EC_MEMMAP_ID               0x20 /* 'E' 'C' */
+#define EC_MEMMAP_ID_VERSION       0x22 /* Version of data in 0x20 - 0x2f */
+#define EC_MEMMAP_THERMAL_VERSION  0x23 /* Version of data in 0x00 - 0x1f */
+#define EC_MEMMAP_BATTERY_VERSION  0x24 /* Version of data in 0x40 - 0x7f */
+#define EC_MEMMAP_SWITCHES_VERSION 0x25 /* Version of data in 0x30 - 0x33 */
+#define EC_MEMMAP_EVENTS_VERSION   0x26 /* Version of data in 0x34 - 0x3f */
+#define EC_MEMMAP_HOST_CMD_FLAGS   0x27 /* Host command interface flags */
+#define EC_MEMMAP_SWITCHES         0x30
+#define EC_MEMMAP_HOST_EVENTS      0x34
+#define EC_MEMMAP_BATT_VOLT        0x40 /* Battery Present Voltage */
+#define EC_MEMMAP_BATT_RATE        0x44 /* Battery Present Rate */
+#define EC_MEMMAP_BATT_CAP         0x48 /* Battery Remaining Capacity */
+#define EC_MEMMAP_BATT_FLAG        0x4c /* Battery State, defined below */
+#define EC_MEMMAP_BATT_DCAP        0x50 /* Battery Design Capacity */
+#define EC_MEMMAP_BATT_DVLT        0x54 /* Battery Design Voltage */
+#define EC_MEMMAP_BATT_LFCC        0x58 /* Battery Last Full Charge Capacity */
+#define EC_MEMMAP_BATT_CCNT        0x5c /* Battery Cycle Count */
+#define EC_MEMMAP_BATT_MFGR        0x60 /* Battery Manufacturer String */
+#define EC_MEMMAP_BATT_MODEL       0x68 /* Battery Model Number String */
+#define EC_MEMMAP_BATT_SERIAL      0x70 /* Battery Serial Number String */
+#define EC_MEMMAP_BATT_TYPE        0x78 /* Battery Type String */
+
+/* Number of temp sensors at EC_MEMMAP_TEMP_SENSOR */
+#define EC_TEMP_SENSOR_ENTRIES     16
+/*
+ * Number of temp sensors at EC_MEMMAP_TEMP_SENSOR_B.
+ *
+ * Valid only if EC_MEMMAP_THERMAL_VERSION returns >= 2.
+ */
+#define EC_TEMP_SENSOR_B_ENTRIES      8
+#define EC_TEMP_SENSOR_NOT_PRESENT    0xff
+#define EC_TEMP_SENSOR_ERROR          0xfe
+#define EC_TEMP_SENSOR_NOT_POWERED    0xfd
+#define EC_TEMP_SENSOR_NOT_CALIBRATED 0xfc
+/*
+ * The offset of temperature value stored in mapped memory.  This allows
+ * reporting a temperature range of 200K to 454K = -73C to 181C.
+ */
+#define EC_TEMP_SENSOR_OFFSET      200
+
+#define EC_FAN_SPEED_ENTRIES       4       /* Number of fans at EC_MEMMAP_FAN */
+#define EC_FAN_SPEED_NOT_PRESENT   0xffff  /* Entry not present */
+#define EC_FAN_SPEED_STALLED       0xfffe  /* Fan stalled */
+
+/* Battery bit flags at EC_MEMMAP_BATT_FLAG. */
+#define EC_BATT_FLAG_AC_PRESENT   0x01
+#define EC_BATT_FLAG_BATT_PRESENT 0x02
+#define EC_BATT_FLAG_DISCHARGING  0x04
+#define EC_BATT_FLAG_CHARGING     0x08
+#define EC_BATT_FLAG_LEVEL_CRITICAL 0x10
+
+/* Switch flags at EC_MEMMAP_SWITCHES */
+#define EC_SWITCH_LID_OPEN               0x01
+#define EC_SWITCH_POWER_BUTTON_PRESSED   0x02
+#define EC_SWITCH_WRITE_PROTECT_DISABLED 0x04
+/* Recovery requested via keyboard */
+#define EC_SWITCH_KEYBOARD_RECOVERY      0x08
+/* Recovery requested via dedicated signal (from servo board) */
+#define EC_SWITCH_DEDICATED_RECOVERY     0x10
+/* Was fake developer mode switch; now unused.  Remove in next refactor. */
+#define EC_SWITCH_IGNORE0                0x20
+
+/* Host command interface flags */
+/* Host command interface supports LPC args (LPC interface only) */
+#define EC_HOST_CMD_FLAG_LPC_ARGS_SUPPORTED  0x01
+
+/* Wireless switch flags */
+#define EC_WIRELESS_SWITCH_WLAN      0x01
+#define EC_WIRELESS_SWITCH_BLUETOOTH 0x02
+
+/*
+ * This header file is used in coreboot both in C and ACPI code.  The ACPI code
+ * is pre-processed to handle constants but the ASL compiler is unable to
+ * handle actual C code so keep it separate.
+ */
+#ifndef __ACPI__
+
+/*
+ * Define __packed if someone hasn't beat us to it.  Linux kernel style
+ * checking prefers __packed over __attribute__((packed)).
+ */
+#ifndef __packed
+#define __packed __attribute__((packed))
+#endif
+
+/* LPC command status byte masks */
+/* EC has written a byte in the data register and host hasn't read it yet */
+#define EC_LPC_STATUS_TO_HOST     0x01
+/* Host has written a command/data byte and the EC hasn't read it yet */
+#define EC_LPC_STATUS_FROM_HOST   0x02
+/* EC is processing a command */
+#define EC_LPC_STATUS_PROCESSING  0x04
+/* Last write to EC was a command, not data */
+#define EC_LPC_STATUS_LAST_CMD    0x08
+/* EC is in burst mode.  Unsupported by Chrome EC, so this bit is never set */
+#define EC_LPC_STATUS_BURST_MODE  0x10
+/* SCI event is pending (requesting SCI query) */
+#define EC_LPC_STATUS_SCI_PENDING 0x20
+/* SMI event is pending (requesting SMI query) */
+#define EC_LPC_STATUS_SMI_PENDING 0x40
+/* (reserved) */
+#define EC_LPC_STATUS_RESERVED    0x80
+
+/*
+ * EC is busy.  This covers both the EC processing a command, and the host has
+ * written a new command but the EC hasn't picked it up yet.
+ */
+#define EC_LPC_STATUS_BUSY_MASK \
+	(EC_LPC_STATUS_FROM_HOST | EC_LPC_STATUS_PROCESSING)
+
+/* Host command response codes */
+enum ec_status {
+	EC_RES_SUCCESS = 0,
+	EC_RES_INVALID_COMMAND = 1,
+	EC_RES_ERROR = 2,
+	EC_RES_INVALID_PARAM = 3,
+	EC_RES_ACCESS_DENIED = 4,
+	EC_RES_INVALID_RESPONSE = 5,
+	EC_RES_INVALID_VERSION = 6,
+	EC_RES_INVALID_CHECKSUM = 7,
+	EC_RES_IN_PROGRESS = 8,		/* Accepted, command in progress */
+	EC_RES_UNAVAILABLE = 9,		/* No response available */
+	EC_RES_TIMEOUT = 10,		/* We got a timeout */
+	EC_RES_OVERFLOW = 11,		/* Table / data overflow */
+};
+
+/*
+ * Host event codes.  Note these are 1-based, not 0-based, because ACPI query
+ * EC command uses code 0 to mean "no event pending".  We explicitly specify
+ * each value in the enum listing so they won't change if we delete/insert an
+ * item or rearrange the list (it needs to be stable across platforms, not
+ * just within a single compiled instance).
+ */
+enum host_event_code {
+	EC_HOST_EVENT_LID_CLOSED = 1,
+	EC_HOST_EVENT_LID_OPEN = 2,
+	EC_HOST_EVENT_POWER_BUTTON = 3,
+	EC_HOST_EVENT_AC_CONNECTED = 4,
+	EC_HOST_EVENT_AC_DISCONNECTED = 5,
+	EC_HOST_EVENT_BATTERY_LOW = 6,
+	EC_HOST_EVENT_BATTERY_CRITICAL = 7,
+	EC_HOST_EVENT_BATTERY = 8,
+	EC_HOST_EVENT_THERMAL_THRESHOLD = 9,
+	EC_HOST_EVENT_THERMAL_OVERLOAD = 10,
+	EC_HOST_EVENT_THERMAL = 11,
+	EC_HOST_EVENT_USB_CHARGER = 12,
+	EC_HOST_EVENT_KEY_PRESSED = 13,
+	/*
+	 * EC has finished initializing the host interface.  The host can check
+	 * for this event following sending a EC_CMD_REBOOT_EC command to
+	 * determine when the EC is ready to accept subsequent commands.
+	 */
+	EC_HOST_EVENT_INTERFACE_READY = 14,
+	/* Keyboard recovery combo has been pressed */
+	EC_HOST_EVENT_KEYBOARD_RECOVERY = 15,
+
+	/* Shutdown due to thermal overload */
+	EC_HOST_EVENT_THERMAL_SHUTDOWN = 16,
+	/* Shutdown due to battery level too low */
+	EC_HOST_EVENT_BATTERY_SHUTDOWN = 17,
+
+	/*
+	 * The high bit of the event mask is not used as a host event code.  If
+	 * it reads back as set, then the entire event mask should be
+	 * considered invalid by the host.  This can happen when reading the
+	 * raw event status via EC_MEMMAP_HOST_EVENTS but the LPC interface is
+	 * not initialized on the EC, or improperly configured on the host.
+	 */
+	EC_HOST_EVENT_INVALID = 32
+};
+/* Host event mask */
+#define EC_HOST_EVENT_MASK(event_code) (1UL << ((event_code) - 1))
+
+/* Arguments at EC_LPC_ADDR_HOST_ARGS */
+struct ec_lpc_host_args {
+	uint8_t flags;
+	uint8_t command_version;
+	uint8_t data_size;
+	/*
+	 * Checksum; sum of command + flags + command_version + data_size +
+	 * all params/response data bytes.
+	 */
+	uint8_t checksum;
+} __packed;
+
+/* Flags for ec_lpc_host_args.flags */
+/*
+ * Args are from host.  Data area at EC_LPC_ADDR_HOST_PARAM contains command
+ * params.
+ *
+ * If EC gets a command and this flag is not set, this is an old-style command.
+ * Command version is 0 and params from host are at EC_LPC_ADDR_OLD_PARAM with
+ * unknown length.  EC must respond with an old-style response (that is,
+ * withouth setting EC_HOST_ARGS_FLAG_TO_HOST).
+ */
+#define EC_HOST_ARGS_FLAG_FROM_HOST 0x01
+/*
+ * Args are from EC.  Data area at EC_LPC_ADDR_HOST_PARAM contains response.
+ *
+ * If EC responds to a command and this flag is not set, this is an old-style
+ * response.  Command version is 0 and response data from EC is at
+ * EC_LPC_ADDR_OLD_PARAM with unknown length.
+ */
+#define EC_HOST_ARGS_FLAG_TO_HOST   0x02
+
+/*
+ * Notes on commands:
+ *
+ * Each command is an 8-byte command value.  Commands which take params or
+ * return response data specify structs for that data.  If no struct is
+ * specified, the command does not input or output data, respectively.
+ * Parameter/response length is implicit in the structs.  Some underlying
+ * communication protocols (I2C, SPI) may add length or checksum headers, but
+ * those are implementation-dependent and not defined here.
+ */
+
+/*****************************************************************************/
+/* General / test commands */
+
+/*
+ * Get protocol version, used to deal with non-backward compatible protocol
+ * changes.
+ */
+#define EC_CMD_PROTO_VERSION 0x00
+
+struct ec_response_proto_version {
+	uint32_t version;
+} __packed;
+
+/*
+ * Hello.  This is a simple command to test the EC is responsive to
+ * commands.
+ */
+#define EC_CMD_HELLO 0x01
+
+struct ec_params_hello {
+	uint32_t in_data;  /* Pass anything here */
+} __packed;
+
+struct ec_response_hello {
+	uint32_t out_data;  /* Output will be in_data + 0x01020304 */
+} __packed;
+
+/* Get version number */
+#define EC_CMD_GET_VERSION 0x02
+
+enum ec_current_image {
+	EC_IMAGE_UNKNOWN = 0,
+	EC_IMAGE_RO,
+	EC_IMAGE_RW
+};
+
+struct ec_response_get_version {
+	/* Null-terminated version strings for RO, RW */
+	char version_string_ro[32];
+	char version_string_rw[32];
+	char reserved[32];       /* Was previously RW-B string */
+	uint32_t current_image;  /* One of ec_current_image */
+} __packed;
+
+/* Read test */
+#define EC_CMD_READ_TEST 0x03
+
+struct ec_params_read_test {
+	uint32_t offset;   /* Starting value for read buffer */
+	uint32_t size;     /* Size to read in bytes */
+} __packed;
+
+struct ec_response_read_test {
+	uint32_t data[32];
+} __packed;
+
+/*
+ * Get build information
+ *
+ * Response is null-terminated string.
+ */
+#define EC_CMD_GET_BUILD_INFO 0x04
+
+/* Get chip info */
+#define EC_CMD_GET_CHIP_INFO 0x05
+
+struct ec_response_get_chip_info {
+	/* Null-terminated strings */
+	char vendor[32];
+	char name[32];
+	char revision[32];  /* Mask version */
+} __packed;
+
+/* Get board HW version */
+#define EC_CMD_GET_BOARD_VERSION 0x06
+
+struct ec_response_board_version {
+	uint16_t board_version;  /* A monotonously incrementing number. */
+} __packed;
+
+/*
+ * Read memory-mapped data.
+ *
+ * This is an alternate interface to memory-mapped data for bus protocols
+ * which don't support direct-mapped memory - I2C, SPI, etc.
+ *
+ * Response is params.size bytes of data.
+ */
+#define EC_CMD_READ_MEMMAP 0x07
+
+struct ec_params_read_memmap {
+	uint8_t offset;   /* Offset in memmap (EC_MEMMAP_*) */
+	uint8_t size;     /* Size to read in bytes */
+} __packed;
+
+/* Read versions supported for a command */
+#define EC_CMD_GET_CMD_VERSIONS 0x08
+
+struct ec_params_get_cmd_versions {
+	uint8_t cmd;      /* Command to check */
+} __packed;
+
+struct ec_response_get_cmd_versions {
+	/*
+	 * Mask of supported versions; use EC_VER_MASK() to compare with a
+	 * desired version.
+	 */
+	uint32_t version_mask;
+} __packed;
+
+/*
+ * Check EC communcations status (busy). This is needed on i2c/spi but not
+ * on lpc since it has its own out-of-band busy indicator.
+ *
+ * lpc must read the status from the command register. Attempting this on
+ * lpc will overwrite the args/parameter space and corrupt its data.
+ */
+#define EC_CMD_GET_COMMS_STATUS		0x09
+
+/* Avoid using ec_status which is for return values */
+enum ec_comms_status {
+	EC_COMMS_STATUS_PROCESSING	= 1 << 0,	/* Processing cmd */
+};
+
+struct ec_response_get_comms_status {
+	uint32_t flags;		/* Mask of enum ec_comms_status */
+} __packed;
+
+
+/*****************************************************************************/
+/* Flash commands */
+
+/* Get flash info */
+#define EC_CMD_FLASH_INFO 0x10
+
+struct ec_response_flash_info {
+	/* Usable flash size, in bytes */
+	uint32_t flash_size;
+	/*
+	 * Write block size.  Write offset and size must be a multiple
+	 * of this.
+	 */
+	uint32_t write_block_size;
+	/*
+	 * Erase block size.  Erase offset and size must be a multiple
+	 * of this.
+	 */
+	uint32_t erase_block_size;
+	/*
+	 * Protection block size.  Protection offset and size must be a
+	 * multiple of this.
+	 */
+	uint32_t protect_block_size;
+} __packed;
+
+/*
+ * Read flash
+ *
+ * Response is params.size bytes of data.
+ */
+#define EC_CMD_FLASH_READ 0x11
+
+struct ec_params_flash_read {
+	uint32_t offset;   /* Byte offset to read */
+	uint32_t size;     /* Size to read in bytes */
+} __packed;
+
+/* Write flash */
+#define EC_CMD_FLASH_WRITE 0x12
+
+struct ec_params_flash_write {
+	uint32_t offset;   /* Byte offset to write */
+	uint32_t size;     /* Size to write in bytes */
+	/*
+	 * Data to write.  Could really use EC_PARAM_SIZE - 8, but tidiest to
+	 * use a power of 2 so writes stay aligned.
+	 */
+	uint8_t data[64];
+} __packed;
+
+/* Erase flash */
+#define EC_CMD_FLASH_ERASE 0x13
+
+struct ec_params_flash_erase {
+	uint32_t offset;   /* Byte offset to erase */
+	uint32_t size;     /* Size to erase in bytes */
+} __packed;
+
+/*
+ * Get/set flash protection.
+ *
+ * If mask!=0, sets/clear the requested bits of flags.  Depending on the
+ * firmware write protect GPIO, not all flags will take effect immediately;
+ * some flags require a subsequent hard reset to take effect.  Check the
+ * returned flags bits to see what actually happened.
+ *
+ * If mask=0, simply returns the current flags state.
+ */
+#define EC_CMD_FLASH_PROTECT 0x15
+#define EC_VER_FLASH_PROTECT 1  /* Command version 1 */
+
+/* Flags for flash protection */
+/* RO flash code protected when the EC boots */
+#define EC_FLASH_PROTECT_RO_AT_BOOT         (1 << 0)
+/*
+ * RO flash code protected now.  If this bit is set, at-boot status cannot
+ * be changed.
+ */
+#define EC_FLASH_PROTECT_RO_NOW             (1 << 1)
+/* Entire flash code protected now, until reboot. */
+#define EC_FLASH_PROTECT_ALL_NOW            (1 << 2)
+/* Flash write protect GPIO is asserted now */
+#define EC_FLASH_PROTECT_GPIO_ASSERTED      (1 << 3)
+/* Error - at least one bank of flash is stuck locked, and cannot be unlocked */
+#define EC_FLASH_PROTECT_ERROR_STUCK        (1 << 4)
+/*
+ * Error - flash protection is in inconsistent state.  At least one bank of
+ * flash which should be protected is not protected.  Usually fixed by
+ * re-requesting the desired flags, or by a hard reset if that fails.
+ */
+#define EC_FLASH_PROTECT_ERROR_INCONSISTENT (1 << 5)
+/* Entile flash code protected when the EC boots */
+#define EC_FLASH_PROTECT_ALL_AT_BOOT        (1 << 6)
+
+struct ec_params_flash_protect {
+	uint32_t mask;   /* Bits in flags to apply */
+	uint32_t flags;  /* New flags to apply */
+} __packed;
+
+struct ec_response_flash_protect {
+	/* Current value of flash protect flags */
+	uint32_t flags;
+	/*
+	 * Flags which are valid on this platform.  This allows the caller
+	 * to distinguish between flags which aren't set vs. flags which can't
+	 * be set on this platform.
+	 */
+	uint32_t valid_flags;
+	/* Flags which can be changed given the current protection state */
+	uint32_t writable_flags;
+} __packed;
+
+/*
+ * Note: commands 0x14 - 0x19 version 0 were old commands to get/set flash
+ * write protect.  These commands may be reused with version > 0.
+ */
+
+/* Get the region offset/size */
+#define EC_CMD_FLASH_REGION_INFO 0x16
+#define EC_VER_FLASH_REGION_INFO 1
+
+enum ec_flash_region {
+	/* Region which holds read-only EC image */
+	EC_FLASH_REGION_RO,
+	/* Region which holds rewritable EC image */
+	EC_FLASH_REGION_RW,
+	/*
+	 * Region which should be write-protected in the factory (a superset of
+	 * EC_FLASH_REGION_RO)
+	 */
+	EC_FLASH_REGION_WP_RO,
+};
+
+struct ec_params_flash_region_info {
+	uint32_t region;  /* enum ec_flash_region */
+} __packed;
+
+struct ec_response_flash_region_info {
+	uint32_t offset;
+	uint32_t size;
+} __packed;
+
+/* Read/write VbNvContext */
+#define EC_CMD_VBNV_CONTEXT 0x17
+#define EC_VER_VBNV_CONTEXT 1
+#define EC_VBNV_BLOCK_SIZE 16
+
+enum ec_vbnvcontext_op {
+	EC_VBNV_CONTEXT_OP_READ,
+	EC_VBNV_CONTEXT_OP_WRITE,
+};
+
+struct ec_params_vbnvcontext {
+	uint32_t op;
+	uint8_t block[EC_VBNV_BLOCK_SIZE];
+} __packed;
+
+struct ec_response_vbnvcontext {
+	uint8_t block[EC_VBNV_BLOCK_SIZE];
+} __packed;
+
+/*****************************************************************************/
+/* PWM commands */
+
+/* Get fan target RPM */
+#define EC_CMD_PWM_GET_FAN_TARGET_RPM 0x20
+
+struct ec_response_pwm_get_fan_rpm {
+	uint32_t rpm;
+} __packed;
+
+/* Set target fan RPM */
+#define EC_CMD_PWM_SET_FAN_TARGET_RPM 0x21
+
+struct ec_params_pwm_set_fan_target_rpm {
+	uint32_t rpm;
+} __packed;
+
+/* Get keyboard backlight */
+#define EC_CMD_PWM_GET_KEYBOARD_BACKLIGHT 0x22
+
+struct ec_response_pwm_get_keyboard_backlight {
+	uint8_t percent;
+	uint8_t enabled;
+} __packed;
+
+/* Set keyboard backlight */
+#define EC_CMD_PWM_SET_KEYBOARD_BACKLIGHT 0x23
+
+struct ec_params_pwm_set_keyboard_backlight {
+	uint8_t percent;
+} __packed;
+
+/* Set target fan PWM duty cycle */
+#define EC_CMD_PWM_SET_FAN_DUTY 0x24
+
+struct ec_params_pwm_set_fan_duty {
+	uint32_t percent;
+} __packed;
+
+/*****************************************************************************/
+/*
+ * Lightbar commands. This looks worse than it is. Since we only use one HOST
+ * command to say "talk to the lightbar", we put the "and tell it to do X" part
+ * into a subcommand. We'll make separate structs for subcommands with
+ * different input args, so that we know how much to expect.
+ */
+#define EC_CMD_LIGHTBAR_CMD 0x28
+
+struct rgb_s {
+	uint8_t r, g, b;
+};
+
+#define LB_BATTERY_LEVELS 4
+/* List of tweakable parameters. NOTE: It's __packed so it can be sent in a
+ * host command, but the alignment is the same regardless. Keep it that way.
+ */
+struct lightbar_params {
+	/* Timing */
+	int google_ramp_up;
+	int google_ramp_down;
+	int s3s0_ramp_up;
+	int s0_tick_delay[2];			/* AC=0/1 */
+	int s0a_tick_delay[2];			/* AC=0/1 */
+	int s0s3_ramp_down;
+	int s3_sleep_for;
+	int s3_ramp_up;
+	int s3_ramp_down;
+
+	/* Oscillation */
+	uint8_t new_s0;
+	uint8_t osc_min[2];			/* AC=0/1 */
+	uint8_t osc_max[2];			/* AC=0/1 */
+	uint8_t w_ofs[2];			/* AC=0/1 */
+
+	/* Brightness limits based on the backlight and AC. */
+	uint8_t bright_bl_off_fixed[2];		/* AC=0/1 */
+	uint8_t bright_bl_on_min[2];		/* AC=0/1 */
+	uint8_t bright_bl_on_max[2];		/* AC=0/1 */
+
+	/* Battery level thresholds */
+	uint8_t battery_threshold[LB_BATTERY_LEVELS - 1];
+
+	/* Map [AC][battery_level] to color index */
+	uint8_t s0_idx[2][LB_BATTERY_LEVELS];	/* AP is running */
+	uint8_t s3_idx[2][LB_BATTERY_LEVELS];	/* AP is sleeping */
+
+	/* Color palette */
+	struct rgb_s color[8];			/* 0-3 are Google colors */
+} __packed;
+
+struct ec_params_lightbar {
+	uint8_t cmd;		      /* Command (see enum lightbar_command) */
+	union {
+		struct {
+			/* no args */
+		} dump, off, on, init, get_seq, get_params;
+
+		struct num {
+			uint8_t num;
+		} brightness, seq, demo;
+
+		struct reg {
+			uint8_t ctrl, reg, value;
+		} reg;
+
+		struct rgb {
+			uint8_t led, red, green, blue;
+		} rgb;
+
+		struct lightbar_params set_params;
+	};
+} __packed;
+
+struct ec_response_lightbar {
+	union {
+		struct dump {
+			struct {
+				uint8_t reg;
+				uint8_t ic0;
+				uint8_t ic1;
+			} vals[23];
+		} dump;
+
+		struct get_seq {
+			uint8_t num;
+		} get_seq;
+
+		struct lightbar_params get_params;
+
+		struct {
+			/* no return params */
+		} off, on, init, brightness, seq, reg, rgb, demo, set_params;
+	};
+} __packed;
+
+/* Lightbar commands */
+enum lightbar_command {
+	LIGHTBAR_CMD_DUMP = 0,
+	LIGHTBAR_CMD_OFF = 1,
+	LIGHTBAR_CMD_ON = 2,
+	LIGHTBAR_CMD_INIT = 3,
+	LIGHTBAR_CMD_BRIGHTNESS = 4,
+	LIGHTBAR_CMD_SEQ = 5,
+	LIGHTBAR_CMD_REG = 6,
+	LIGHTBAR_CMD_RGB = 7,
+	LIGHTBAR_CMD_GET_SEQ = 8,
+	LIGHTBAR_CMD_DEMO = 9,
+	LIGHTBAR_CMD_GET_PARAMS = 10,
+	LIGHTBAR_CMD_SET_PARAMS = 11,
+	LIGHTBAR_NUM_CMDS
+};
+
+/*****************************************************************************/
+/* Verified boot commands */
+
+/*
+ * Note: command code 0x29 version 0 was VBOOT_CMD in Link EVT; it may be
+ * reused for other purposes with version > 0.
+ */
+
+/* Verified boot hash command */
+#define EC_CMD_VBOOT_HASH 0x2A
+
+struct ec_params_vboot_hash {
+	uint8_t cmd;             /* enum ec_vboot_hash_cmd */
+	uint8_t hash_type;       /* enum ec_vboot_hash_type */
+	uint8_t nonce_size;      /* Nonce size; may be 0 */
+	uint8_t reserved0;       /* Reserved; set 0 */
+	uint32_t offset;         /* Offset in flash to hash */
+	uint32_t size;           /* Number of bytes to hash */
+	uint8_t nonce_data[64];  /* Nonce data; ignored if nonce_size=0 */
+} __packed;
+
+struct ec_response_vboot_hash {
+	uint8_t status;          /* enum ec_vboot_hash_status */
+	uint8_t hash_type;       /* enum ec_vboot_hash_type */
+	uint8_t digest_size;     /* Size of hash digest in bytes */
+	uint8_t reserved0;       /* Ignore; will be 0 */
+	uint32_t offset;         /* Offset in flash which was hashed */
+	uint32_t size;           /* Number of bytes hashed */
+	uint8_t hash_digest[64]; /* Hash digest data */
+} __packed;
+
+enum ec_vboot_hash_cmd {
+	EC_VBOOT_HASH_GET = 0,       /* Get current hash status */
+	EC_VBOOT_HASH_ABORT = 1,     /* Abort calculating current hash */
+	EC_VBOOT_HASH_START = 2,     /* Start computing a new hash */
+	EC_VBOOT_HASH_RECALC = 3,    /* Synchronously compute a new hash */
+};
+
+enum ec_vboot_hash_type {
+	EC_VBOOT_HASH_TYPE_SHA256 = 0, /* SHA-256 */
+};
+
+enum ec_vboot_hash_status {
+	EC_VBOOT_HASH_STATUS_NONE = 0, /* No hash (not started, or aborted) */
+	EC_VBOOT_HASH_STATUS_DONE = 1, /* Finished computing a hash */
+	EC_VBOOT_HASH_STATUS_BUSY = 2, /* Busy computing a hash */
+};
+
+/*
+ * Special values for offset for EC_VBOOT_HASH_START and EC_VBOOT_HASH_RECALC.
+ * If one of these is specified, the EC will automatically update offset and
+ * size to the correct values for the specified image (RO or RW).
+ */
+#define EC_VBOOT_HASH_OFFSET_RO 0xfffffffe
+#define EC_VBOOT_HASH_OFFSET_RW 0xfffffffd
+
+/*****************************************************************************/
+/* USB charging control commands */
+
+/* Set USB port charging mode */
+#define EC_CMD_USB_CHARGE_SET_MODE 0x30
+
+struct ec_params_usb_charge_set_mode {
+	uint8_t usb_port_id;
+	uint8_t mode;
+} __packed;
+
+/*****************************************************************************/
+/* Persistent storage for host */
+
+/* Maximum bytes that can be read/written in a single command */
+#define EC_PSTORE_SIZE_MAX 64
+
+/* Get persistent storage info */
+#define EC_CMD_PSTORE_INFO 0x40
+
+struct ec_response_pstore_info {
+	/* Persistent storage size, in bytes */
+	uint32_t pstore_size;
+	/* Access size; read/write offset and size must be a multiple of this */
+	uint32_t access_size;
+} __packed;
+
+/*
+ * Read persistent storage
+ *
+ * Response is params.size bytes of data.
+ */
+#define EC_CMD_PSTORE_READ 0x41
+
+struct ec_params_pstore_read {
+	uint32_t offset;   /* Byte offset to read */
+	uint32_t size;     /* Size to read in bytes */
+} __packed;
+
+/* Write persistent storage */
+#define EC_CMD_PSTORE_WRITE 0x42
+
+struct ec_params_pstore_write {
+	uint32_t offset;   /* Byte offset to write */
+	uint32_t size;     /* Size to write in bytes */
+	uint8_t data[EC_PSTORE_SIZE_MAX];
+} __packed;
+
+/*****************************************************************************/
+/* Real-time clock */
+
+/* RTC params and response structures */
+struct ec_params_rtc {
+	uint32_t time;
+} __packed;
+
+struct ec_response_rtc {
+	uint32_t time;
+} __packed;
+
+/* These use ec_response_rtc */
+#define EC_CMD_RTC_GET_VALUE 0x44
+#define EC_CMD_RTC_GET_ALARM 0x45
+
+/* These all use ec_params_rtc */
+#define EC_CMD_RTC_SET_VALUE 0x46
+#define EC_CMD_RTC_SET_ALARM 0x47
+
+/*****************************************************************************/
+/* Port80 log access */
+
+/* Get last port80 code from previous boot */
+#define EC_CMD_PORT80_LAST_BOOT 0x48
+
+struct ec_response_port80_last_boot {
+	uint16_t code;
+} __packed;
+
+/*****************************************************************************/
+/* Thermal engine commands */
+
+/* Set thershold value */
+#define EC_CMD_THERMAL_SET_THRESHOLD 0x50
+
+struct ec_params_thermal_set_threshold {
+	uint8_t sensor_type;
+	uint8_t threshold_id;
+	uint16_t value;
+} __packed;
+
+/* Get threshold value */
+#define EC_CMD_THERMAL_GET_THRESHOLD 0x51
+
+struct ec_params_thermal_get_threshold {
+	uint8_t sensor_type;
+	uint8_t threshold_id;
+} __packed;
+
+struct ec_response_thermal_get_threshold {
+	uint16_t value;
+} __packed;
+
+/* Toggle automatic fan control */
+#define EC_CMD_THERMAL_AUTO_FAN_CTRL 0x52
+
+/* Get TMP006 calibration data */
+#define EC_CMD_TMP006_GET_CALIBRATION 0x53
+
+struct ec_params_tmp006_get_calibration {
+	uint8_t index;
+} __packed;
+
+struct ec_response_tmp006_get_calibration {
+	float s0;
+	float b0;
+	float b1;
+	float b2;
+} __packed;
+
+/* Set TMP006 calibration data */
+#define EC_CMD_TMP006_SET_CALIBRATION 0x54
+
+struct ec_params_tmp006_set_calibration {
+	uint8_t index;
+	uint8_t reserved[3];  /* Reserved; set 0 */
+	float s0;
+	float b0;
+	float b1;
+	float b2;
+} __packed;
+
+/*****************************************************************************/
+/* CROS_EC - Matrix KeyBoard Protocol */
+
+/*
+ * Read key state
+ *
+ * Returns raw data for keyboard cols; see ec_response_cros_ec_info.cols for
+ * expected response size.
+ */
+#define EC_CMD_CROS_EC_STATE 0x60
+
+/* Provide information about the matrix : number of rows and columns */
+#define EC_CMD_CROS_EC_INFO 0x61
+
+struct ec_response_cros_ec_info {
+	uint32_t rows;
+	uint32_t cols;
+	uint8_t switches;
+} __packed;
+
+/* Simulate key press */
+#define EC_CMD_CROS_EC_SIMULATE_KEY 0x62
+
+struct ec_params_cros_ec_simulate_key {
+	uint8_t col;
+	uint8_t row;
+	uint8_t pressed;
+} __packed;
+
+/* Configure keyboard scanning */
+#define EC_CMD_CROS_EC_SET_CONFIG 0x64
+#define EC_CMD_CROS_EC_GET_CONFIG 0x65
+
+/* flags */
+enum cros_ec_config_flags {
+	EC_CROS_EC_FLAGS_ENABLE = 1,	/* Enable keyboard scanning */
+};
+
+enum cros_ec_config_valid {
+	EC_CROS_EC_VALID_SCAN_PERIOD		= 1 << 0,
+	EC_CROS_EC_VALID_POLL_TIMEOUT		= 1 << 1,
+	EC_CROS_EC_VALID_MIN_POST_SCAN_DELAY	= 1 << 3,
+	EC_CROS_EC_VALID_OUTPUT_SETTLE		= 1 << 4,
+	EC_CROS_EC_VALID_DEBOUNCE_DOWN		= 1 << 5,
+	EC_CROS_EC_VALID_DEBOUNCE_UP		= 1 << 6,
+	EC_CROS_EC_VALID_FIFO_MAX_DEPTH		= 1 << 7,
+};
+
+/* Configuration for our key scanning algorithm */
+struct ec_cros_ec_config {
+	uint32_t valid_mask;		/* valid fields */
+	uint8_t flags;		/* some flags (enum cros_ec_config_flags) */
+	uint8_t valid_flags;		/* which flags are valid */
+	uint16_t scan_period_us;	/* period between start of scans */
+	/* revert to interrupt mode after no activity for this long */
+	uint32_t poll_timeout_us;
+	/*
+	 * minimum post-scan relax time. Once we finish a scan we check
+	 * the time until we are due to start the next one. If this time is
+	 * shorter this field, we use this instead.
+	 */
+	uint16_t min_post_scan_delay_us;
+	/* delay between setting up output and waiting for it to settle */
+	uint16_t output_settle_us;
+	uint16_t debounce_down_us;	/* time for debounce on key down */
+	uint16_t debounce_up_us;	/* time for debounce on key up */
+	/* maximum depth to allow for fifo (0 = no keyscan output) */
+	uint8_t fifo_max_depth;
+} __packed;
+
+struct ec_params_cros_ec_set_config {
+	struct ec_cros_ec_config config;
+} __packed;
+
+struct ec_response_cros_ec_get_config {
+	struct ec_cros_ec_config config;
+} __packed;
+
+/* Run the key scan emulation */
+#define EC_CMD_KEYSCAN_SEQ_CTRL 0x66
+
+enum ec_keyscan_seq_cmd {
+	EC_KEYSCAN_SEQ_STATUS = 0,	/* Get status information */
+	EC_KEYSCAN_SEQ_CLEAR = 1,	/* Clear sequence */
+	EC_KEYSCAN_SEQ_ADD = 2,		/* Add item to sequence */
+	EC_KEYSCAN_SEQ_START = 3,	/* Start running sequence */
+	EC_KEYSCAN_SEQ_COLLECT = 4,	/* Collect sequence summary data */
+};
+
+enum ec_collect_flags {
+	/*
+	 * Indicates this scan was processed by the EC. Due to timing, some
+	 * scans may be skipped.
+	 */
+	EC_KEYSCAN_SEQ_FLAG_DONE	= 1 << 0,
+};
+
+struct ec_collect_item {
+	uint8_t flags;		/* some flags (enum ec_collect_flags) */
+};
+
+struct ec_params_keyscan_seq_ctrl {
+	uint8_t cmd;	/* Command to send (enum ec_keyscan_seq_cmd) */
+	union {
+		struct {
+			uint8_t active;		/* still active */
+			uint8_t num_items;	/* number of items */
+			/* Current item being presented */
+			uint8_t cur_item;
+		} status;
+		struct {
+			/*
+			 * Absolute time for this scan, measured from the
+			 * start of the sequence.
+			 */
+			uint32_t time_us;
+			uint8_t scan[0];	/* keyscan data */
+		} add;
+		struct {
+			uint8_t start_item;	/* First item to return */
+			uint8_t num_items;	/* Number of items to return */
+		} collect;
+	};
+} __packed;
+
+struct ec_result_keyscan_seq_ctrl {
+	union {
+		struct {
+			uint8_t num_items;	/* Number of items */
+			/* Data for each item */
+			struct ec_collect_item item[0];
+		} collect;
+	};
+} __packed;
+
+/*****************************************************************************/
+/* Temperature sensor commands */
+
+/* Read temperature sensor info */
+#define EC_CMD_TEMP_SENSOR_GET_INFO 0x70
+
+struct ec_params_temp_sensor_get_info {
+	uint8_t id;
+} __packed;
+
+struct ec_response_temp_sensor_get_info {
+	char sensor_name[32];
+	uint8_t sensor_type;
+} __packed;
+
+/*****************************************************************************/
+
+/*
+ * Note: host commands 0x80 - 0x87 are reserved to avoid conflict with ACPI
+ * commands accidentally sent to the wrong interface.  See the ACPI section
+ * below.
+ */
+
+/*****************************************************************************/
+/* Host event commands */
+
+/*
+ * Host event mask params and response structures, shared by all of the host
+ * event commands below.
+ */
+struct ec_params_host_event_mask {
+	uint32_t mask;
+} __packed;
+
+struct ec_response_host_event_mask {
+	uint32_t mask;
+} __packed;
+
+/* These all use ec_response_host_event_mask */
+#define EC_CMD_HOST_EVENT_GET_B         0x87
+#define EC_CMD_HOST_EVENT_GET_SMI_MASK  0x88
+#define EC_CMD_HOST_EVENT_GET_SCI_MASK  0x89
+#define EC_CMD_HOST_EVENT_GET_WAKE_MASK 0x8d
+
+/* These all use ec_params_host_event_mask */
+#define EC_CMD_HOST_EVENT_SET_SMI_MASK  0x8a
+#define EC_CMD_HOST_EVENT_SET_SCI_MASK  0x8b
+#define EC_CMD_HOST_EVENT_CLEAR         0x8c
+#define EC_CMD_HOST_EVENT_SET_WAKE_MASK 0x8e
+#define EC_CMD_HOST_EVENT_CLEAR_B       0x8f
+
+/*****************************************************************************/
+/* Switch commands */
+
+/* Enable/disable LCD backlight */
+#define EC_CMD_SWITCH_ENABLE_BKLIGHT 0x90
+
+struct ec_params_switch_enable_backlight {
+	uint8_t enabled;
+} __packed;
+
+/* Enable/disable WLAN/Bluetooth */
+#define EC_CMD_SWITCH_ENABLE_WIRELESS 0x91
+
+struct ec_params_switch_enable_wireless {
+	uint8_t enabled;
+} __packed;
+
+/*****************************************************************************/
+/* GPIO commands. Only available on EC if write protect has been disabled. */
+
+/* Set GPIO output value */
+#define EC_CMD_GPIO_SET 0x92
+
+struct ec_params_gpio_set {
+	char name[32];
+	uint8_t val;
+} __packed;
+
+/* Get GPIO value */
+#define EC_CMD_GPIO_GET 0x93
+
+struct ec_params_gpio_get {
+	char name[32];
+} __packed;
+struct ec_response_gpio_get {
+	uint8_t val;
+} __packed;
+
+/*****************************************************************************/
+/* I2C commands. Only available when flash write protect is unlocked. */
+
+/* Read I2C bus */
+#define EC_CMD_I2C_READ 0x94
+
+struct ec_params_i2c_read {
+	uint16_t addr;
+	uint8_t read_size; /* Either 8 or 16. */
+	uint8_t port;
+	uint8_t offset;
+} __packed;
+struct ec_response_i2c_read {
+	uint16_t data;
+} __packed;
+
+/* Write I2C bus */
+#define EC_CMD_I2C_WRITE 0x95
+
+struct ec_params_i2c_write {
+	uint16_t data;
+	uint16_t addr;
+	uint8_t write_size; /* Either 8 or 16. */
+	uint8_t port;
+	uint8_t offset;
+} __packed;
+
+/*****************************************************************************/
+/* Charge state commands. Only available when flash write protect unlocked. */
+
+/* Force charge state machine to stop in idle mode */
+#define EC_CMD_CHARGE_FORCE_IDLE 0x96
+
+struct ec_params_force_idle {
+	uint8_t enabled;
+} __packed;
+
+/*****************************************************************************/
+/* Console commands. Only available when flash write protect is unlocked. */
+
+/* Snapshot console output buffer for use by EC_CMD_CONSOLE_READ. */
+#define EC_CMD_CONSOLE_SNAPSHOT 0x97
+
+/*
+ * Read next chunk of data from saved snapshot.
+ *
+ * Response is null-terminated string.  Empty string, if there is no more
+ * remaining output.
+ */
+#define EC_CMD_CONSOLE_READ 0x98
+
+/*****************************************************************************/
+
+/*
+ * Cut off battery power output if the battery supports.
+ *
+ * For unsupported battery, just don't implement this command and lets EC
+ * return EC_RES_INVALID_COMMAND.
+ */
+#define EC_CMD_BATTERY_CUT_OFF 0x99
+
+/*****************************************************************************/
+/* USB port mux control. */
+
+/*
+ * Switch USB mux or return to automatic switching.
+ */
+#define EC_CMD_USB_MUX 0x9a
+
+struct ec_params_usb_mux {
+	uint8_t mux;
+} __packed;
+
+/*****************************************************************************/
+/* LDOs / FETs control. */
+
+enum ec_ldo_state {
+	EC_LDO_STATE_OFF = 0,	/* the LDO / FET is shut down */
+	EC_LDO_STATE_ON = 1,	/* the LDO / FET is ON / providing power */
+};
+
+/*
+ * Switch on/off a LDO.
+ */
+#define EC_CMD_LDO_SET 0x9b
+
+struct ec_params_ldo_set {
+	uint8_t index;
+	uint8_t state;
+} __packed;
+
+/*
+ * Get LDO state.
+ */
+#define EC_CMD_LDO_GET 0x9c
+
+struct ec_params_ldo_get {
+	uint8_t index;
+} __packed;
+
+struct ec_response_ldo_get {
+	uint8_t state;
+} __packed;
+
+/*****************************************************************************/
+/* Temporary debug commands. TODO: remove this crosbug.com/p/13849 */
+
+/*
+ * Dump charge state machine context.
+ *
+ * Response is a binary dump of charge state machine context.
+ */
+#define EC_CMD_CHARGE_DUMP 0xa0
+
+/*
+ * Set maximum battery charging current.
+ */
+#define EC_CMD_CHARGE_CURRENT_LIMIT 0xa1
+
+struct ec_params_current_limit {
+	uint32_t limit;
+} __packed;
+
+/*****************************************************************************/
+/* Smart battery pass-through */
+
+/* Get / Set 16-bit smart battery registers */
+#define EC_CMD_SB_READ_WORD   0xb0
+#define EC_CMD_SB_WRITE_WORD  0xb1
+
+/* Get / Set string smart battery parameters
+ * formatted as SMBUS "block".
+ */
+#define EC_CMD_SB_READ_BLOCK  0xb2
+#define EC_CMD_SB_WRITE_BLOCK 0xb3
+
+struct ec_params_sb_rd {
+	uint8_t reg;
+} __packed;
+
+struct ec_response_sb_rd_word {
+	uint16_t value;
+} __packed;
+
+struct ec_params_sb_wr_word {
+	uint8_t reg;
+	uint16_t value;
+} __packed;
+
+struct ec_response_sb_rd_block {
+	uint8_t data[32];
+} __packed;
+
+struct ec_params_sb_wr_block {
+	uint8_t reg;
+	uint16_t data[32];
+} __packed;
+
+/*****************************************************************************/
+/* System commands */
+
+/*
+ * TODO: this is a confusing name, since it doesn't necessarily reboot the EC.
+ * Rename to "set image" or something similar.
+ */
+#define EC_CMD_REBOOT_EC 0xd2
+
+/* Command */
+enum ec_reboot_cmd {
+	EC_REBOOT_CANCEL = 0,        /* Cancel a pending reboot */
+	EC_REBOOT_JUMP_RO = 1,       /* Jump to RO without rebooting */
+	EC_REBOOT_JUMP_RW = 2,       /* Jump to RW without rebooting */
+	/* (command 3 was jump to RW-B) */
+	EC_REBOOT_COLD = 4,          /* Cold-reboot */
+	EC_REBOOT_DISABLE_JUMP = 5,  /* Disable jump until next reboot */
+	EC_REBOOT_HIBERNATE = 6      /* Hibernate EC */
+};
+
+/* Flags for ec_params_reboot_ec.reboot_flags */
+#define EC_REBOOT_FLAG_RESERVED0      (1 << 0)  /* Was recovery request */
+#define EC_REBOOT_FLAG_ON_AP_SHUTDOWN (1 << 1)  /* Reboot after AP shutdown */
+
+struct ec_params_reboot_ec {
+	uint8_t cmd;           /* enum ec_reboot_cmd */
+	uint8_t flags;         /* See EC_REBOOT_FLAG_* */
+} __packed;
+
+/*
+ * Get information on last EC panic.
+ *
+ * Returns variable-length platform-dependent panic information.  See panic.h
+ * for details.
+ */
+#define EC_CMD_GET_PANIC_INFO 0xd3
+
+/*****************************************************************************/
+/*
+ * ACPI commands
+ *
+ * These are valid ONLY on the ACPI command/data port.
+ */
+
+/*
+ * ACPI Read Embedded Controller
+ *
+ * This reads from ACPI memory space on the EC (EC_ACPI_MEM_*).
+ *
+ * Use the following sequence:
+ *
+ *    - Write EC_CMD_ACPI_READ to EC_LPC_ADDR_ACPI_CMD
+ *    - Wait for EC_LPC_CMDR_PENDING bit to clear
+ *    - Write address to EC_LPC_ADDR_ACPI_DATA
+ *    - Wait for EC_LPC_CMDR_DATA bit to set
+ *    - Read value from EC_LPC_ADDR_ACPI_DATA
+ */
+#define EC_CMD_ACPI_READ 0x80
+
+/*
+ * ACPI Write Embedded Controller
+ *
+ * This reads from ACPI memory space on the EC (EC_ACPI_MEM_*).
+ *
+ * Use the following sequence:
+ *
+ *    - Write EC_CMD_ACPI_WRITE to EC_LPC_ADDR_ACPI_CMD
+ *    - Wait for EC_LPC_CMDR_PENDING bit to clear
+ *    - Write address to EC_LPC_ADDR_ACPI_DATA
+ *    - Wait for EC_LPC_CMDR_PENDING bit to clear
+ *    - Write value to EC_LPC_ADDR_ACPI_DATA
+ */
+#define EC_CMD_ACPI_WRITE 0x81
+
+/*
+ * ACPI Query Embedded Controller
+ *
+ * This clears the lowest-order bit in the currently pending host events, and
+ * sets the result code to the 1-based index of the bit (event 0x00000001 = 1,
+ * event 0x80000000 = 32), or 0 if no event was pending.
+ */
+#define EC_CMD_ACPI_QUERY_EVENT 0x84
+
+/* Valid addresses in ACPI memory space, for read/write commands */
+/* Memory space version; set to EC_ACPI_MEM_VERSION_CURRENT */
+#define EC_ACPI_MEM_VERSION            0x00
+/*
+ * Test location; writing value here updates test compliment byte to (0xff -
+ * value).
+ */
+#define EC_ACPI_MEM_TEST               0x01
+/* Test compliment; writes here are ignored. */
+#define EC_ACPI_MEM_TEST_COMPLIMENT    0x02
+/* Keyboard backlight brightness percent (0 - 100) */
+#define EC_ACPI_MEM_KEYBOARD_BACKLIGHT 0x03
+
+/* Current version of ACPI memory address space */
+#define EC_ACPI_MEM_VERSION_CURRENT 1
+
+
+/*****************************************************************************/
+/*
+ * Special commands
+ *
+ * These do not follow the normal rules for commands.  See each command for
+ * details.
+ */
+
+/*
+ * Reboot NOW
+ *
+ * This command will work even when the EC LPC interface is busy, because the
+ * reboot command is processed at interrupt level.  Note that when the EC
+ * reboots, the host will reboot too, so there is no response to this command.
+ *
+ * Use EC_CMD_REBOOT_EC to reboot the EC more politely.
+ */
+#define EC_CMD_REBOOT 0xd1  /* Think "die" */
+
+/*
+ * Resend last response (not supported on LPC).
+ *
+ * Returns EC_RES_UNAVAILABLE if there is no response available - for example,
+ * there was no previous command, or the previous command's response was too
+ * big to save.
+ */
+#define EC_CMD_RESEND_RESPONSE 0xdb
+
+/*
+ * This header byte on a command indicate version 0. Any header byte less
+ * than this means that we are talking to an old EC which doesn't support
+ * versioning. In that case, we assume version 0.
+ *
+ * Header bytes greater than this indicate a later version. For example,
+ * EC_CMD_VERSION0 + 1 means we are using version 1.
+ *
+ * The old EC interface must not use commands 0dc or higher.
+ */
+#define EC_CMD_VERSION0 0xdc
+
+#endif  /* !__ACPI__ */
+
+#endif  /* __CROS_EC_COMMANDS_H */
diff --git a/include/fdtdec.h b/include/fdtdec.h
index 42e9048..ca7cd04 100644
--- a/include/fdtdec.h
+++ b/include/fdtdec.h
@@ -84,6 +84,7 @@ enum fdt_compat_id {
    COMPAT_SAMSUNG_EXYNOS5_SOUND,	/* Exynos Sound */
    COMPAT_WOLFSON_WM8994_CODEC,	/* Wolfson WM8994 Sound Codec */
    COMPAT_SAMSUNG_EXYNOS_SPI,	/* Exynos SPI */
+	COMPAT_GOOGLE_CROS_EC,		/* Google CROS_EC Protocol */
    COMPAT_SAMSUNG_EXYNOS_EHCI,	/* Exynos EHCI controller */
    COMPAT_SAMSUNG_EXYNOS_USB_PHY,	/* Exynos phy controller for usb2.0 */
    COMPAT_SAMSUNG_EXYNOS_TMU,	/* Exynos TMU */
diff --git a/lib/fdtdec.c b/lib/fdtdec.c
index 49bec81..21ed4f1 100644
--- a/lib/fdtdec.c
+++ b/lib/fdtdec.c
@@ -57,6 +57,7 @@ static const char * const compat_names[COMPAT_COUNT] = {
    COMPAT(SAMSUNG_EXYNOS5_SOUND, "samsung,exynos-sound"),
    COMPAT(WOLFSON_WM8994_CODEC, "wolfson,wm8994-codec"),
    COMPAT(SAMSUNG_EXYNOS_SPI, "samsung,exynos-spi"),
+	COMPAT(GOOGLE_CROS_EC, "google,cros-ec"),
    COMPAT(SAMSUNG_EXYNOS_EHCI, "samsung,exynos-ehci"),
    COMPAT(SAMSUNG_EXYNOS_USB_PHY, "samsung,exynos-usb-phy"),
    COMPAT(SAMSUNG_EXYNOS_TMU, "samsung,exynos-tmu"),
-- 
1.8.2.1


    