Dear Kim Phillips,
In message 20090925183946.1a30eefe.kim.phillips@freescale.com you wrote:
Hi WD,
Please pull some minor enhancements for 83xx:
The following changes since commit 984f10baac8ef6032df52f135943d6b0bc96f724: Wolfgang Denk (1): mpc5121ads: fix breakage introduced when reordering elpida_mddrc_config[]
are available in the git repository at:
git://git.denx.de/u-boot-mpc83xx.git master
Anton Vorontsov (5): net: uec_phy: Implement TXID and RXID RGMII modes for Marvell PHYs net: uec: Fix uccf.h and uec.h headers to include headers they depend on mpc83xx: mpc8360emds: Don't use LBC SDRAM when DDR is available mpc83xx: mpc8360emds: Use RGMII-ID mode, add workarounds for rev. 2.1 CPUs mpc83xx: mpc8360emds: Add QE USB device tree fixups
Paul Gortmaker (1): sbc8349: tidy up Makefile to use new configuration script.
Makefile | 15 +------ board/freescale/mpc8360emds/mpc8360emds.c | 73 ++++++++++++++++++++++++++--- drivers/qe/uccf.h | 1 + drivers/qe/uec.h | 4 ++ drivers/qe/uec_phy.c | 15 +++++- include/configs/MPC8360EMDS.h | 6 ++- include/configs/sbc8349.h | 15 ++++++ 7 files changed, 104 insertions(+), 25 deletions(-)
Applied, thanks.
I might just ask you to pull the "retain POR values" patch, but it's too close to the window, and I want to give the opportunity for a good review cycle on it.
OK, apply when you feel it's OK.
Best regards,
Wolfgang Denk