Signed-off-by: Valeriy Glushkov gvv@lstec.com --- include/configs/MPC8349ITX.h | 31 +++++++++++++++++++++++++++++-- 1 files changed, 29 insertions(+), 2 deletions(-)
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index f2e574b..0ff09a0 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -79,6 +79,7 @@ #define CONFIG_COMPACT_FLASH /* The CF card interface on the back of the board */ #define CONFIG_VSC7385_ENET /* VSC7385 ethernet support */ #define CONFIG_SATA_SIL3114 /* SIL3114 SATA controller */ +#define CONFIG_SYS_USB_HOST /* use the EHCI USB controller */ #endif
#define CONFIG_PCI @@ -155,6 +156,25 @@
#endif
+#ifdef CONFIG_SYS_USB_HOST +/* + * Support USB + */ +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_FSL + +/* Current USB implementation supports the only USB controller, + * so we have to choose between the MPH or the DR ones */ +#if 1 +#define CONFIG_HAS_FSL_MPH_USB +#else +#define CONFIG_HAS_FSL_DR_USB +#endif + +#endif + /* * DDR Setup */ @@ -463,9 +483,11 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_CMD_DHCP #define CONFIG_CMD_SDRAM
-#if defined(CONFIG_COMPACT_FLASH) || defined(CONFIG_SATA_SIL3114) +#if defined(CONFIG_COMPACT_FLASH) || defined(CONFIG_SATA_SIL3114) \ + || defined(CONFIG_USB_STORAGE) #define CONFIG_DOS_PARTITION #define CONFIG_CMD_FAT + #define CONFIG_SUPPORT_VFAT #endif
#ifdef CONFIG_COMPACT_FLASH @@ -474,6 +496,9 @@ boards, we say we have two, but don't display a message if we find only one. */
#ifdef CONFIG_SATA_SIL3114 #define CONFIG_CMD_SATA +#endif + +#if defined(CONFIG_SATA_SIL3114) || defined(CONFIG_USB_STORAGE) #define CONFIG_CMD_EXT2 #endif
@@ -567,12 +592,14 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_SYS_SPCR_TSEC2EP 3 /* TSEC2 emergency priority (0-3) */ #define CONFIG_SYS_SCCR_TSEC1CM 1 /* TSEC1 clock mode (0-3) */ #define CONFIG_SYS_SCCR_TSEC2CM 1 /* TSEC2 & I2C0 clock mode (0-3) */ +#define CONFIG_SYS_SCCR_USBMPHCM 3 /* USB MPH controller's clock */ +#define CONFIG_SYS_SCCR_USBDRCM 0 /* USB DR controller's clock */
/* * System IO Config */ #define CONFIG_SYS_SICRH SICRH_TSOBI1 /* Needed for gigabit to work on TSEC 1 */ -#define CONFIG_SYS_SICRL (SICRL_LDP_A | SICRL_USB1) +#define CONFIG_SYS_SICRL (SICRL_LDP_A | SICRL_USB1) /* USB DR as device + USB MPH as host */
#define CONFIG_SYS_HID0_INIT 0x000000000 #define CONFIG_SYS_HID0_FINAL CONFIG_SYS_HID0_INIT