From: Boris Brezillon boris.brezillon@bootlin.com
Add an intermediate layer to abstract NAND device interface so that some logic can be shared between SPI NANDs, parallel/raw NANDs, OneNANDs, ...
Signed-off-by: Boris Brezillon boris.brezillon@bootlin.com Signed-off-by: Miquel Raynal miquel.raynal@bootlin.com Acked-by: Jagan Teki jagan@openedev.com --- drivers/mtd/nand/Kconfig | 3 + drivers/mtd/nand/Makefile | 2 + drivers/mtd/nand/bbt.c | 132 +++++++++ drivers/mtd/nand/core.c | 243 +++++++++++++++ include/linux/mtd/nand.h | 731 ++++++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 1111 insertions(+) create mode 100644 drivers/mtd/nand/bbt.c create mode 100644 drivers/mtd/nand/core.c create mode 100644 include/linux/mtd/nand.h
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 6d53734718..1c1a1f487e 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -1 +1,4 @@ +config MTD_NAND_CORE + tristate + source "drivers/mtd/nand/raw/Kconfig" diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index 8b2d0e118d..e07d0da46a 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -1,3 +1,5 @@ # SPDX-License-Identifier: GPL-2.0+
+nandcore-objs := core.o bbt.o +obj-$(CONFIG_MTD_NAND_CORE) += nandcore.o obj-$(CONFIG_MTD_NAND) += raw/ diff --git a/drivers/mtd/nand/bbt.c b/drivers/mtd/nand/bbt.c new file mode 100644 index 0000000000..7e0ad3190c --- /dev/null +++ b/drivers/mtd/nand/bbt.c @@ -0,0 +1,132 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2017 Free Electrons + * + * Authors: + * Boris Brezillon boris.brezillon@free-electrons.com + * Peter Pan peterpandong@micron.com + */ + +#define pr_fmt(fmt) "nand-bbt: " fmt + +#include <linux/mtd/nand.h> +#ifndef __UBOOT__ +#include <linux/slab.h> +#endif + +/** + * nanddev_bbt_init() - Initialize the BBT (Bad Block Table) + * @nand: NAND device + * + * Initialize the in-memory BBT. + * + * Return: 0 in case of success, a negative error code otherwise. + */ +int nanddev_bbt_init(struct nand_device *nand) +{ + unsigned int bits_per_block = fls(NAND_BBT_BLOCK_NUM_STATUS); + unsigned int nblocks = nanddev_neraseblocks(nand); + unsigned int nwords = DIV_ROUND_UP(nblocks * bits_per_block, + BITS_PER_LONG); + + nand->bbt.cache = kzalloc(nwords, GFP_KERNEL); + if (!nand->bbt.cache) + return -ENOMEM; + + return 0; +} +EXPORT_SYMBOL_GPL(nanddev_bbt_init); + +/** + * nanddev_bbt_cleanup() - Cleanup the BBT (Bad Block Table) + * @nand: NAND device + * + * Undoes what has been done in nanddev_bbt_init() + */ +void nanddev_bbt_cleanup(struct nand_device *nand) +{ + kfree(nand->bbt.cache); +} +EXPORT_SYMBOL_GPL(nanddev_bbt_cleanup); + +/** + * nanddev_bbt_update() - Update a BBT + * @nand: nand device + * + * Update the BBT. Currently a NOP function since on-flash bbt is not yet + * supported. + * + * Return: 0 in case of success, a negative error code otherwise. + */ +int nanddev_bbt_update(struct nand_device *nand) +{ + return 0; +} +EXPORT_SYMBOL_GPL(nanddev_bbt_update); + +/** + * nanddev_bbt_get_block_status() - Return the status of an eraseblock + * @nand: nand device + * @entry: the BBT entry + * + * Return: a positive number nand_bbt_block_status status or -%ERANGE if @entry + * is bigger than the BBT size. + */ +int nanddev_bbt_get_block_status(const struct nand_device *nand, + unsigned int entry) +{ + unsigned int bits_per_block = fls(NAND_BBT_BLOCK_NUM_STATUS); + unsigned long *pos = nand->bbt.cache + + ((entry * bits_per_block) / BITS_PER_LONG); + unsigned int offs = (entry * bits_per_block) % BITS_PER_LONG; + unsigned long status; + + if (entry >= nanddev_neraseblocks(nand)) + return -ERANGE; + + status = pos[0] >> offs; + if (bits_per_block + offs > BITS_PER_LONG) + status |= pos[1] << (BITS_PER_LONG - offs); + + return status & GENMASK(bits_per_block - 1, 0); +} +EXPORT_SYMBOL_GPL(nanddev_bbt_get_block_status); + +/** + * nanddev_bbt_set_block_status() - Update the status of an eraseblock in the + * in-memory BBT + * @nand: nand device + * @entry: the BBT entry to update + * @status: the new status + * + * Update an entry of the in-memory BBT. If you want to push the updated BBT + * the NAND you should call nanddev_bbt_update(). + * + * Return: 0 in case of success or -%ERANGE if @entry is bigger than the BBT + * size. + */ +int nanddev_bbt_set_block_status(struct nand_device *nand, unsigned int entry, + enum nand_bbt_block_status status) +{ + unsigned int bits_per_block = fls(NAND_BBT_BLOCK_NUM_STATUS); + unsigned long *pos = nand->bbt.cache + + ((entry * bits_per_block) / BITS_PER_LONG); + unsigned int offs = (entry * bits_per_block) % BITS_PER_LONG; + unsigned long val = status & GENMASK(bits_per_block - 1, 0); + + if (entry >= nanddev_neraseblocks(nand)) + return -ERANGE; + + pos[0] &= ~GENMASK(offs + bits_per_block - 1, offs); + pos[0] |= val << offs; + + if (bits_per_block + offs > BITS_PER_LONG) { + unsigned int rbits = bits_per_block + offs - BITS_PER_LONG; + + pos[1] &= ~GENMASK(rbits - 1, 0); + pos[1] |= val >> rbits; + } + + return 0; +} +EXPORT_SYMBOL_GPL(nanddev_bbt_set_block_status); diff --git a/drivers/mtd/nand/core.c b/drivers/mtd/nand/core.c new file mode 100644 index 0000000000..0b793695cc --- /dev/null +++ b/drivers/mtd/nand/core.c @@ -0,0 +1,243 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2017 Free Electrons + * + * Authors: + * Boris Brezillon boris.brezillon@free-electrons.com + * Peter Pan peterpandong@micron.com + */ + +#define pr_fmt(fmt) "nand: " fmt + +#ifndef __UBOOT__ +#include <linux/module.h> +#endif +#include <linux/mtd/nand.h> + +/** + * nanddev_isbad() - Check if a block is bad + * @nand: NAND device + * @pos: position pointing to the block we want to check + * + * Return: true if the block is bad, false otherwise. + */ +bool nanddev_isbad(struct nand_device *nand, const struct nand_pos *pos) +{ + if (nanddev_bbt_is_initialized(nand)) { + unsigned int entry; + int status; + + entry = nanddev_bbt_pos_to_entry(nand, pos); + status = nanddev_bbt_get_block_status(nand, entry); + /* Lazy block status retrieval */ + if (status == NAND_BBT_BLOCK_STATUS_UNKNOWN) { + if (nand->ops->isbad(nand, pos)) + status = NAND_BBT_BLOCK_FACTORY_BAD; + else + status = NAND_BBT_BLOCK_GOOD; + + nanddev_bbt_set_block_status(nand, entry, status); + } + + if (status == NAND_BBT_BLOCK_WORN || + status == NAND_BBT_BLOCK_FACTORY_BAD) + return true; + + return false; + } + + return nand->ops->isbad(nand, pos); +} +EXPORT_SYMBOL_GPL(nanddev_isbad); + +/** + * nanddev_markbad() - Mark a block as bad + * @nand: NAND device + * @pos: position of the block to mark bad + * + * Mark a block bad. This function is updating the BBT if available and + * calls the low-level markbad hook (nand->ops->markbad()). + * + * Return: 0 in case of success, a negative error code otherwise. + */ +int nanddev_markbad(struct nand_device *nand, const struct nand_pos *pos) +{ + struct mtd_info *mtd = nanddev_to_mtd(nand); + unsigned int entry; + int ret = 0; + + if (nanddev_isbad(nand, pos)) + return 0; + + ret = nand->ops->markbad(nand, pos); + if (ret) + pr_warn("failed to write BBM to block @%llx (err = %d)\n", + nanddev_pos_to_offs(nand, pos), ret); + + if (!nanddev_bbt_is_initialized(nand)) + goto out; + + entry = nanddev_bbt_pos_to_entry(nand, pos); + ret = nanddev_bbt_set_block_status(nand, entry, NAND_BBT_BLOCK_WORN); + if (ret) + goto out; + + ret = nanddev_bbt_update(nand); + +out: + if (!ret) + mtd->ecc_stats.badblocks++; + + return ret; +} +EXPORT_SYMBOL_GPL(nanddev_markbad); + +/** + * nanddev_isreserved() - Check whether an eraseblock is reserved or not + * @nand: NAND device + * @pos: NAND position to test + * + * Checks whether the eraseblock pointed by @pos is reserved or not. + * + * Return: true if the eraseblock is reserved, false otherwise. + */ +bool nanddev_isreserved(struct nand_device *nand, const struct nand_pos *pos) +{ + unsigned int entry; + int status; + + if (!nanddev_bbt_is_initialized(nand)) + return false; + + /* Return info from the table */ + entry = nanddev_bbt_pos_to_entry(nand, pos); + status = nanddev_bbt_get_block_status(nand, entry); + return status == NAND_BBT_BLOCK_RESERVED; +} +EXPORT_SYMBOL_GPL(nanddev_isreserved); + +/** + * nanddev_erase() - Erase a NAND portion + * @nand: NAND device + * @pos: position of the block to erase + * + * Erases the block if it's not bad. + * + * Return: 0 in case of success, a negative error code otherwise. + */ +int nanddev_erase(struct nand_device *nand, const struct nand_pos *pos) +{ + if (nanddev_isbad(nand, pos) || nanddev_isreserved(nand, pos)) { + pr_warn("attempt to erase a bad/reserved block @%llx\n", + nanddev_pos_to_offs(nand, pos)); + return -EIO; + } + + return nand->ops->erase(nand, pos); +} +EXPORT_SYMBOL_GPL(nanddev_erase); + +/** + * nanddev_mtd_erase() - Generic mtd->_erase() implementation for NAND devices + * @mtd: MTD device + * @einfo: erase request + * + * This is a simple mtd->_erase() implementation iterating over all blocks + * concerned by @einfo and calling nand->ops->erase() on each of them. + * + * Note that mtd->_erase should not be directly assigned to this helper, + * because there's no locking here. NAND specialized layers should instead + * implement there own wrapper around nanddev_mtd_erase() taking the + * appropriate lock before calling nanddev_mtd_erase(). + * + * Return: 0 in case of success, a negative error code otherwise. + */ +int nanddev_mtd_erase(struct mtd_info *mtd, struct erase_info *einfo) +{ + struct nand_device *nand = mtd_to_nanddev(mtd); + struct nand_pos pos, last; + int ret; + + nanddev_offs_to_pos(nand, einfo->addr, &pos); + nanddev_offs_to_pos(nand, einfo->addr + einfo->len - 1, &last); + while (nanddev_pos_cmp(&pos, &last) <= 0) { + ret = nanddev_erase(nand, &pos); + if (ret) { + einfo->fail_addr = nanddev_pos_to_offs(nand, &pos); + + return ret; + } + + nanddev_pos_next_eraseblock(nand, &pos); + } + + return 0; +} +EXPORT_SYMBOL_GPL(nanddev_mtd_erase); + +/** + * nanddev_init() - Initialize a NAND device + * @nand: NAND device + * @ops: NAND device operations + * @owner: NAND device owner + * + * Initializes a NAND device object. Consistency checks are done on @ops and + * @nand->memorg. Also takes care of initializing the BBT. + * + * Return: 0 in case of success, a negative error code otherwise. + */ +int nanddev_init(struct nand_device *nand, const struct nand_ops *ops, + struct module *owner) +{ + struct mtd_info *mtd = nanddev_to_mtd(nand); + struct nand_memory_organization *memorg = nanddev_get_memorg(nand); + + if (!nand || !ops) + return -EINVAL; + + if (!ops->erase || !ops->markbad || !ops->isbad) + return -EINVAL; + + if (!memorg->bits_per_cell || !memorg->pagesize || + !memorg->pages_per_eraseblock || !memorg->eraseblocks_per_lun || + !memorg->planes_per_lun || !memorg->luns_per_target || + !memorg->ntargets) + return -EINVAL; + + nand->rowconv.eraseblock_addr_shift = + fls(memorg->pages_per_eraseblock - 1); + nand->rowconv.lun_addr_shift = fls(memorg->eraseblocks_per_lun - 1) + + nand->rowconv.eraseblock_addr_shift; + + nand->ops = ops; + + mtd->type = memorg->bits_per_cell == 1 ? + MTD_NANDFLASH : MTD_MLCNANDFLASH; + mtd->flags = MTD_CAP_NANDFLASH; + mtd->erasesize = memorg->pagesize * memorg->pages_per_eraseblock; + mtd->writesize = memorg->pagesize; + mtd->writebufsize = memorg->pagesize; + mtd->oobsize = memorg->oobsize; + mtd->size = nanddev_size(nand); + mtd->owner = owner; + + return nanddev_bbt_init(nand); +} +EXPORT_SYMBOL_GPL(nanddev_init); + +/** + * nanddev_cleanup() - Release resources allocated in nanddev_init() + * @nand: NAND device + * + * Basically undoes what has been done in nanddev_init(). + */ +void nanddev_cleanup(struct nand_device *nand) +{ + if (nanddev_bbt_is_initialized(nand)) + nanddev_bbt_cleanup(nand); +} +EXPORT_SYMBOL_GPL(nanddev_cleanup); + +MODULE_DESCRIPTION("Generic NAND framework"); +MODULE_AUTHOR("Boris Brezillon boris.brezillon@free-electrons.com"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h new file mode 100644 index 0000000000..ada7af4a41 --- /dev/null +++ b/include/linux/mtd/nand.h @@ -0,0 +1,731 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright 2017 - Free Electrons + * + * Authors: + * Boris Brezillon boris.brezillon@free-electrons.com + * Peter Pan peterpandong@micron.com + */ + +#ifndef __LINUX_MTD_NAND_H +#define __LINUX_MTD_NAND_H + +#include <linux/mtd/mtd.h> + +/** + * struct nand_memory_organization - Memory organization structure + * @bits_per_cell: number of bits per NAND cell + * @pagesize: page size + * @oobsize: OOB area size + * @pages_per_eraseblock: number of pages per eraseblock + * @eraseblocks_per_lun: number of eraseblocks per LUN (Logical Unit Number) + * @planes_per_lun: number of planes per LUN + * @luns_per_target: number of LUN per target (target is a synonym for die) + * @ntargets: total number of targets exposed by the NAND device + */ +struct nand_memory_organization { + unsigned int bits_per_cell; + unsigned int pagesize; + unsigned int oobsize; + unsigned int pages_per_eraseblock; + unsigned int eraseblocks_per_lun; + unsigned int planes_per_lun; + unsigned int luns_per_target; + unsigned int ntargets; +}; + +#define NAND_MEMORG(bpc, ps, os, ppe, epl, ppl, lpt, nt) \ + { \ + .bits_per_cell = (bpc), \ + .pagesize = (ps), \ + .oobsize = (os), \ + .pages_per_eraseblock = (ppe), \ + .eraseblocks_per_lun = (epl), \ + .planes_per_lun = (ppl), \ + .luns_per_target = (lpt), \ + .ntargets = (nt), \ + } + +/** + * struct nand_row_converter - Information needed to convert an absolute offset + * into a row address + * @lun_addr_shift: position of the LUN identifier in the row address + * @eraseblock_addr_shift: position of the eraseblock identifier in the row + * address + */ +struct nand_row_converter { + unsigned int lun_addr_shift; + unsigned int eraseblock_addr_shift; +}; + +/** + * struct nand_pos - NAND position object + * @target: the NAND target/die + * @lun: the LUN identifier + * @plane: the plane within the LUN + * @eraseblock: the eraseblock within the LUN + * @page: the page within the LUN + * + * These information are usually used by specific sub-layers to select the + * appropriate target/die and generate a row address to pass to the device. + */ +struct nand_pos { + unsigned int target; + unsigned int lun; + unsigned int plane; + unsigned int eraseblock; + unsigned int page; +}; + +/** + * struct nand_page_io_req - NAND I/O request object + * @pos: the position this I/O request is targeting + * @dataoffs: the offset within the page + * @datalen: number of data bytes to read from/write to this page + * @databuf: buffer to store data in or get data from + * @ooboffs: the OOB offset within the page + * @ooblen: the number of OOB bytes to read from/write to this page + * @oobbuf: buffer to store OOB data in or get OOB data from + * + * This object is used to pass per-page I/O requests to NAND sub-layers. This + * way all useful information are already formatted in a useful way and + * specific NAND layers can focus on translating these information into + * specific commands/operations. + */ +struct nand_page_io_req { + struct nand_pos pos; + unsigned int dataoffs; + unsigned int datalen; + union { + const void *out; + void *in; + } databuf; + unsigned int ooboffs; + unsigned int ooblen; + union { + const void *out; + void *in; + } oobbuf; +}; + +/** + * struct nand_ecc_req - NAND ECC requirements + * @strength: ECC strength + * @step_size: ECC step/block size + */ +struct nand_ecc_req { + unsigned int strength; + unsigned int step_size; +}; + +#define NAND_ECCREQ(str, stp) { .strength = (str), .step_size = (stp) } + +/** + * struct nand_bbt - bad block table object + * @cache: in memory BBT cache + */ +struct nand_bbt { + unsigned long *cache; +}; + +struct nand_device; + +/** + * struct nand_ops - NAND operations + * @erase: erase a specific block. No need to check if the block is bad before + * erasing, this has been taken care of by the generic NAND layer + * @markbad: mark a specific block bad. No need to check if the block is + * already marked bad, this has been taken care of by the generic + * NAND layer. This method should just write the BBM (Bad Block + * Marker) so that future call to struct_nand_ops->isbad() return + * true + * @isbad: check whether a block is bad or not. This method should just read + * the BBM and return whether the block is bad or not based on what it + * reads + * + * These are all low level operations that should be implemented by specialized + * NAND layers (SPI NAND, raw NAND, ...). + */ +struct nand_ops { + int (*erase)(struct nand_device *nand, const struct nand_pos *pos); + int (*markbad)(struct nand_device *nand, const struct nand_pos *pos); + bool (*isbad)(struct nand_device *nand, const struct nand_pos *pos); +}; + +/** + * struct nand_device - NAND device + * @mtd: MTD instance attached to the NAND device + * @memorg: memory layout + * @eccreq: ECC requirements + * @rowconv: position to row address converter + * @bbt: bad block table info + * @ops: NAND operations attached to the NAND device + * + * Generic NAND object. Specialized NAND layers (raw NAND, SPI NAND, OneNAND) + * should declare their own NAND object embedding a nand_device struct (that's + * how inheritance is done). + * struct_nand_device->memorg and struct_nand_device->eccreq should be filled + * at device detection time to reflect the NAND device + * capabilities/requirements. Once this is done nanddev_init() can be called. + * It will take care of converting NAND information into MTD ones, which means + * the specialized NAND layers should never manually tweak + * struct_nand_device->mtd except for the ->_read/write() hooks. + */ +struct nand_device { + struct mtd_info *mtd; + struct nand_memory_organization memorg; + struct nand_ecc_req eccreq; + struct nand_row_converter rowconv; + struct nand_bbt bbt; + const struct nand_ops *ops; +}; + +/** + * struct nand_io_iter - NAND I/O iterator + * @req: current I/O request + * @oobbytes_per_page: maximum number of OOB bytes per page + * @dataleft: remaining number of data bytes to read/write + * @oobleft: remaining number of OOB bytes to read/write + * + * Can be used by specialized NAND layers to iterate over all pages covered + * by an MTD I/O request, which should greatly simplifies the boiler-plate + * code needed to read/write data from/to a NAND device. + */ +struct nand_io_iter { + struct nand_page_io_req req; + unsigned int oobbytes_per_page; + unsigned int dataleft; + unsigned int oobleft; +}; + +/** + * mtd_to_nanddev() - Get the NAND device attached to the MTD instance + * @mtd: MTD instance + * + * Return: the NAND device embedding @mtd. + */ +static inline struct nand_device *mtd_to_nanddev(struct mtd_info *mtd) +{ + return mtd->priv; +} + +/** + * nanddev_to_mtd() - Get the MTD device attached to a NAND device + * @nand: NAND device + * + * Return: the MTD device embedded in @nand. + */ +static inline struct mtd_info *nanddev_to_mtd(struct nand_device *nand) +{ + return nand->mtd; +} + +/* + * nanddev_bits_per_cell() - Get the number of bits per cell + * @nand: NAND device + * + * Return: the number of bits per cell. + */ +static inline unsigned int nanddev_bits_per_cell(const struct nand_device *nand) +{ + return nand->memorg.bits_per_cell; +} + +/** + * nanddev_page_size() - Get NAND page size + * @nand: NAND device + * + * Return: the page size. + */ +static inline size_t nanddev_page_size(const struct nand_device *nand) +{ + return nand->memorg.pagesize; +} + +/** + * nanddev_per_page_oobsize() - Get NAND OOB size + * @nand: NAND device + * + * Return: the OOB size. + */ +static inline unsigned int +nanddev_per_page_oobsize(const struct nand_device *nand) +{ + return nand->memorg.oobsize; +} + +/** + * nanddev_pages_per_eraseblock() - Get the number of pages per eraseblock + * @nand: NAND device + * + * Return: the number of pages per eraseblock. + */ +static inline unsigned int +nanddev_pages_per_eraseblock(const struct nand_device *nand) +{ + return nand->memorg.pages_per_eraseblock; +} + +/** + * nanddev_per_page_oobsize() - Get NAND erase block size + * @nand: NAND device + * + * Return: the eraseblock size. + */ +static inline size_t nanddev_eraseblock_size(const struct nand_device *nand) +{ + return nand->memorg.pagesize * nand->memorg.pages_per_eraseblock; +} + +/** + * nanddev_eraseblocks_per_lun() - Get the number of eraseblocks per LUN + * @nand: NAND device + * + * Return: the number of eraseblocks per LUN. + */ +static inline unsigned int +nanddev_eraseblocks_per_lun(const struct nand_device *nand) +{ + return nand->memorg.eraseblocks_per_lun; +} + +/** + * nanddev_target_size() - Get the total size provided by a single target/die + * @nand: NAND device + * + * Return: the total size exposed by a single target/die in bytes. + */ +static inline u64 nanddev_target_size(const struct nand_device *nand) +{ + return (u64)nand->memorg.luns_per_target * + nand->memorg.eraseblocks_per_lun * + nand->memorg.pages_per_eraseblock * + nand->memorg.pagesize; +} + +/** + * nanddev_ntarget() - Get the total of targets + * @nand: NAND device + * + * Return: the number of targets/dies exposed by @nand. + */ +static inline unsigned int nanddev_ntargets(const struct nand_device *nand) +{ + return nand->memorg.ntargets; +} + +/** + * nanddev_neraseblocks() - Get the total number of erasablocks + * @nand: NAND device + * + * Return: the total number of eraseblocks exposed by @nand. + */ +static inline unsigned int nanddev_neraseblocks(const struct nand_device *nand) +{ + return (u64)nand->memorg.luns_per_target * + nand->memorg.eraseblocks_per_lun * + nand->memorg.pages_per_eraseblock; +} + +/** + * nanddev_size() - Get NAND size + * @nand: NAND device + * + * Return: the total size (in bytes) exposed by @nand. + */ +static inline u64 nanddev_size(const struct nand_device *nand) +{ + return nanddev_target_size(nand) * nanddev_ntargets(nand); +} + +/** + * nanddev_get_memorg() - Extract memory organization info from a NAND device + * @nand: NAND device + * + * This can be used by the upper layer to fill the memorg info before calling + * nanddev_init(). + * + * Return: the memorg object embedded in the NAND device. + */ +static inline struct nand_memory_organization * +nanddev_get_memorg(struct nand_device *nand) +{ + return &nand->memorg; +} + +int nanddev_init(struct nand_device *nand, const struct nand_ops *ops, + struct module *owner); +void nanddev_cleanup(struct nand_device *nand); + +/** + * nanddev_register() - Register a NAND device + * @nand: NAND device + * + * Register a NAND device. + * This function is just a wrapper around mtd_device_register() + * registering the MTD device embedded in @nand. + * + * Return: 0 in case of success, a negative error code otherwise. + */ +static inline int nanddev_register(struct nand_device *nand) +{ + return mtd_device_register(nand->mtd, NULL, 0); +} + +/** + * nanddev_unregister() - Unregister a NAND device + * @nand: NAND device + * + * Unregister a NAND device. + * This function is just a wrapper around mtd_device_unregister() + * unregistering the MTD device embedded in @nand. + * + * Return: 0 in case of success, a negative error code otherwise. + */ +static inline int nanddev_unregister(struct nand_device *nand) +{ + return mtd_device_unregister(nand->mtd); +} + +/** + * nanddev_set_of_node() - Attach a DT node to a NAND device + * @nand: NAND device + * @np: DT node + * + * Attach a DT node to a NAND device. + */ +static inline void nanddev_set_of_node(struct nand_device *nand, + const struct device_node *np) +{ + mtd_set_of_node(nand->mtd, np); +} + +/** + * nanddev_get_of_node() - Retrieve the DT node attached to a NAND device + * @nand: NAND device + * + * Return: the DT node attached to @nand. + */ +static inline const struct device_node *nanddev_get_of_node(struct nand_device *nand) +{ + return mtd_get_of_node(nand->mtd); +} + +/** + * nanddev_offs_to_pos() - Convert an absolute NAND offset into a NAND position + * @nand: NAND device + * @offs: absolute NAND offset (usually passed by the MTD layer) + * @pos: a NAND position object to fill in + * + * Converts @offs into a nand_pos representation. + * + * Return: the offset within the NAND page pointed by @pos. + */ +static inline unsigned int nanddev_offs_to_pos(struct nand_device *nand, + loff_t offs, + struct nand_pos *pos) +{ + unsigned int pageoffs; + u64 tmp = offs; + + pageoffs = do_div(tmp, nand->memorg.pagesize); + pos->page = do_div(tmp, nand->memorg.pages_per_eraseblock); + pos->eraseblock = do_div(tmp, nand->memorg.eraseblocks_per_lun); + pos->plane = pos->eraseblock % nand->memorg.planes_per_lun; + pos->lun = do_div(tmp, nand->memorg.luns_per_target); + pos->target = tmp; + + return pageoffs; +} + +/** + * nanddev_pos_cmp() - Compare two NAND positions + * @a: First NAND position + * @b: Second NAND position + * + * Compares two NAND positions. + * + * Return: -1 if @a < @b, 0 if @a == @b and 1 if @a > @b. + */ +static inline int nanddev_pos_cmp(const struct nand_pos *a, + const struct nand_pos *b) +{ + if (a->target != b->target) + return a->target < b->target ? -1 : 1; + + if (a->lun != b->lun) + return a->lun < b->lun ? -1 : 1; + + if (a->eraseblock != b->eraseblock) + return a->eraseblock < b->eraseblock ? -1 : 1; + + if (a->page != b->page) + return a->page < b->page ? -1 : 1; + + return 0; +} + +/** + * nanddev_pos_to_offs() - Convert a NAND position into an absolute offset + * @nand: NAND device + * @pos: the NAND position to convert + * + * Converts @pos NAND position into an absolute offset. + * + * Return: the absolute offset. Note that @pos points to the beginning of a + * page, if one wants to point to a specific offset within this page + * the returned offset has to be adjusted manually. + */ +static inline loff_t nanddev_pos_to_offs(struct nand_device *nand, + const struct nand_pos *pos) +{ + unsigned int npages; + + npages = pos->page + + ((pos->eraseblock + + (pos->lun + + (pos->target * nand->memorg.luns_per_target)) * + nand->memorg.eraseblocks_per_lun) * + nand->memorg.pages_per_eraseblock); + + return (loff_t)npages * nand->memorg.pagesize; +} + +/** + * nanddev_pos_to_row() - Extract a row address from a NAND position + * @nand: NAND device + * @pos: the position to convert + * + * Converts a NAND position into a row address that can then be passed to the + * device. + * + * Return: the row address extracted from @pos. + */ +static inline unsigned int nanddev_pos_to_row(struct nand_device *nand, + const struct nand_pos *pos) +{ + return (pos->lun << nand->rowconv.lun_addr_shift) | + (pos->eraseblock << nand->rowconv.eraseblock_addr_shift) | + pos->page; +} + +/** + * nanddev_pos_next_target() - Move a position to the next target/die + * @nand: NAND device + * @pos: the position to update + * + * Updates @pos to point to the start of the next target/die. Useful when you + * want to iterate over all targets/dies of a NAND device. + */ +static inline void nanddev_pos_next_target(struct nand_device *nand, + struct nand_pos *pos) +{ + pos->page = 0; + pos->plane = 0; + pos->eraseblock = 0; + pos->lun = 0; + pos->target++; +} + +/** + * nanddev_pos_next_lun() - Move a position to the next LUN + * @nand: NAND device + * @pos: the position to update + * + * Updates @pos to point to the start of the next LUN. Useful when you want to + * iterate over all LUNs of a NAND device. + */ +static inline void nanddev_pos_next_lun(struct nand_device *nand, + struct nand_pos *pos) +{ + if (pos->lun >= nand->memorg.luns_per_target - 1) + return nanddev_pos_next_target(nand, pos); + + pos->lun++; + pos->page = 0; + pos->plane = 0; + pos->eraseblock = 0; +} + +/** + * nanddev_pos_next_eraseblock() - Move a position to the next eraseblock + * @nand: NAND device + * @pos: the position to update + * + * Updates @pos to point to the start of the next eraseblock. Useful when you + * want to iterate over all eraseblocks of a NAND device. + */ +static inline void nanddev_pos_next_eraseblock(struct nand_device *nand, + struct nand_pos *pos) +{ + if (pos->eraseblock >= nand->memorg.eraseblocks_per_lun - 1) + return nanddev_pos_next_lun(nand, pos); + + pos->eraseblock++; + pos->page = 0; + pos->plane = pos->eraseblock % nand->memorg.planes_per_lun; +} + +/** + * nanddev_pos_next_eraseblock() - Move a position to the next page + * @nand: NAND device + * @pos: the position to update + * + * Updates @pos to point to the start of the next page. Useful when you want to + * iterate over all pages of a NAND device. + */ +static inline void nanddev_pos_next_page(struct nand_device *nand, + struct nand_pos *pos) +{ + if (pos->page >= nand->memorg.pages_per_eraseblock - 1) + return nanddev_pos_next_eraseblock(nand, pos); + + pos->page++; +} + +/** + * nand_io_iter_init - Initialize a NAND I/O iterator + * @nand: NAND device + * @offs: absolute offset + * @req: MTD request + * @iter: NAND I/O iterator + * + * Initializes a NAND iterator based on the information passed by the MTD + * layer. + */ +static inline void nanddev_io_iter_init(struct nand_device *nand, + loff_t offs, struct mtd_oob_ops *req, + struct nand_io_iter *iter) +{ + struct mtd_info *mtd = nanddev_to_mtd(nand); + + iter->req.dataoffs = nanddev_offs_to_pos(nand, offs, &iter->req.pos); + iter->req.ooboffs = req->ooboffs; + iter->oobbytes_per_page = mtd_oobavail(mtd, req); + iter->dataleft = req->len; + iter->oobleft = req->ooblen; + iter->req.databuf.in = req->datbuf; + iter->req.datalen = min_t(unsigned int, + nand->memorg.pagesize - iter->req.dataoffs, + iter->dataleft); + iter->req.oobbuf.in = req->oobbuf; + iter->req.ooblen = min_t(unsigned int, + iter->oobbytes_per_page - iter->req.ooboffs, + iter->oobleft); +} + +/** + * nand_io_iter_next_page - Move to the next page + * @nand: NAND device + * @iter: NAND I/O iterator + * + * Updates the @iter to point to the next page. + */ +static inline void nanddev_io_iter_next_page(struct nand_device *nand, + struct nand_io_iter *iter) +{ + nanddev_pos_next_page(nand, &iter->req.pos); + iter->dataleft -= iter->req.datalen; + iter->req.databuf.in += iter->req.datalen; + iter->oobleft -= iter->req.ooblen; + iter->req.oobbuf.in += iter->req.ooblen; + iter->req.dataoffs = 0; + iter->req.ooboffs = 0; + iter->req.datalen = min_t(unsigned int, nand->memorg.pagesize, + iter->dataleft); + iter->req.ooblen = min_t(unsigned int, iter->oobbytes_per_page, + iter->oobleft); +} + +/** + * nand_io_iter_end - Should end iteration or not + * @nand: NAND device + * @iter: NAND I/O iterator + * + * Check whether @iter has reached the end of the NAND portion it was asked to + * iterate on or not. + * + * Return: true if @iter has reached the end of the iteration request, false + * otherwise. + */ +static inline bool nanddev_io_iter_end(struct nand_device *nand, + const struct nand_io_iter *iter) +{ + if (iter->dataleft || iter->oobleft) + return false; + + return true; +} + +/** + * nand_io_for_each_page - Iterate over all NAND pages contained in an MTD I/O + * request + * @nand: NAND device + * @start: start address to read/write from + * @req: MTD I/O request + * @iter: NAND I/O iterator + * + * Should be used for iterate over pages that are contained in an MTD request. + */ +#define nanddev_io_for_each_page(nand, start, req, iter) \ + for (nanddev_io_iter_init(nand, start, req, iter); \ + !nanddev_io_iter_end(nand, iter); \ + nanddev_io_iter_next_page(nand, iter)) + +bool nanddev_isbad(struct nand_device *nand, const struct nand_pos *pos); +bool nanddev_isreserved(struct nand_device *nand, const struct nand_pos *pos); +int nanddev_erase(struct nand_device *nand, const struct nand_pos *pos); +int nanddev_markbad(struct nand_device *nand, const struct nand_pos *pos); + +/* BBT related functions */ +enum nand_bbt_block_status { + NAND_BBT_BLOCK_STATUS_UNKNOWN, + NAND_BBT_BLOCK_GOOD, + NAND_BBT_BLOCK_WORN, + NAND_BBT_BLOCK_RESERVED, + NAND_BBT_BLOCK_FACTORY_BAD, + NAND_BBT_BLOCK_NUM_STATUS, +}; + +int nanddev_bbt_init(struct nand_device *nand); +void nanddev_bbt_cleanup(struct nand_device *nand); +int nanddev_bbt_update(struct nand_device *nand); +int nanddev_bbt_get_block_status(const struct nand_device *nand, + unsigned int entry); +int nanddev_bbt_set_block_status(struct nand_device *nand, unsigned int entry, + enum nand_bbt_block_status status); +int nanddev_bbt_markbad(struct nand_device *nand, unsigned int block); + +/** + * nanddev_bbt_pos_to_entry() - Convert a NAND position into a BBT entry + * @nand: NAND device + * @pos: the NAND position we want to get BBT entry for + * + * Return the BBT entry used to store information about the eraseblock pointed + * by @pos. + * + * Return: the BBT entry storing information about eraseblock pointed by @pos. + */ +static inline unsigned int nanddev_bbt_pos_to_entry(struct nand_device *nand, + const struct nand_pos *pos) +{ + return pos->eraseblock + + ((pos->lun + (pos->target * nand->memorg.luns_per_target)) * + nand->memorg.eraseblocks_per_lun); +} + +/** + * nanddev_bbt_is_initialized() - Check if the BBT has been initialized + * @nand: NAND device + * + * Return: true if the BBT has been initialized, false otherwise. + */ +static inline bool nanddev_bbt_is_initialized(struct nand_device *nand) +{ + return !!nand->bbt.cache; +} + +/* MTD -> NAND helper functions. */ +int nanddev_mtd_erase(struct mtd_info *mtd, struct erase_info *einfo); + +#endif /* __LINUX_MTD_NAND_H */