Hi Macpaul,
I totally agree with you, maybe there're some effort to get all the PHY chip's datasheet. :) As you know, some datasheet is under NDA.
Thanks, Mingkai
From: Macpaul Lin [mailto:macpaul@gmail.com] Sent: Thursday, January 27, 2011 1:44 PM To: Hu Mingkai-B21284 Cc: u-boot@lists.denx.de; Phillips Kim-R1AAHA; Liu Dave-R63238; galak@kernel.crashing.org; Medve Emilian-EMMEDVE1; Radulescu Ruxandra Ioana-B05472; Fleming Andy-AFLEMING; Haruki Dai-R35557; Tabi Timur-B04825; Wolfgang Denk Subject: Re: [U-Boot] [PATCH 13/14] PHY: add some Marvell phy support
Hi Mingkai, 2011/1/27 Mingkai Hu <Mingkai.hu@freescale.commailto:Mingkai.hu@freescale.com> Port from tsec.c file to add support for m88e1011s, m88e1111s, m88e1118, m88e1121r, m88e1145, m88e1149s.
Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.commailto:Mingkai.hu@freescale.com> --- drivers/net/fsl_phy.c | 299 +++++++++++++++++++++++++++++++++++++++++++++++++ drivers/net/fsl_phy.h | 36 ++++++ 2 files changed, 335 insertions(+), 0 deletions(-)
diff --git a/drivers/net/fsl_phy.c b/drivers/net/fsl_phy.c index 7c22666..ad9d65e 100644 --- a/drivers/net/fsl_phy.c +++ b/drivers/net/fsl_phy.c @@ -457,6 +457,245 @@ static int bcm5482_startup(struct mii_info *mii_info) return 0; }
+/* Marvell 88E1011S */ +static int m88e1011s_config(struct mii_info *mii_info) +{ + /* Reset and configure the PHY */ + tsec_phy_write(mii_info, 0, MII_BMCR, BMCR_RESET); + + tsec_phy_write(mii_info, 0, 0x1d, 0x1f); + tsec_phy_write(mii_info, 0, 0x1e, 0x200c); + tsec_phy_write(mii_info, 0, 0x1d, 0x5); + tsec_phy_write(mii_info, 0, 0x1e, 0); + tsec_phy_write(mii_info, 0, 0x1e, 0x100); + tsec_phy_write(mii_info, 0, MII_CTRL1000, MII_CTRL1000_INIT); + tsec_phy_write(mii_info, 0, MII_ADVERTISE, MII_ADVERTISE_INIT); + + tsec_phy_write(mii_info, 0, MII_BMCR, BMCR_RESET); + tsec_phy_write(mii_info, 0, MII_BMCR, MII_BMCR_INIT); + + return 0; +}
Is this possible to assign the clear definition about bit fields with phy registers rather than hard-code hex value? I think clear definitions will help both other vendor and your customers, whom are the ODM/OEM vendors is easier to debug with these phy chips.
Hope you can agree with this suggestions.
-- Best regards, Macpaul Lin