make_fit_atf.py uses physical address of first segment as the entry point to bl31. It is incorrect and causes following abort when bl31_entry() is called:
U-Boot SPL board initTrying to boot from MMC1 "Synchronous Abort" handler, esr 0x02000000 elr: 0000000000000000 lr : 00000000ff8c7e8c x 0: 00000000ff8e0000 x 1: 0000000000000000 x 2: 0000000000000000 x 3: 00000000ff8e0180 x 4: 0000000000000000 x 5: 0000000000000000 x 6: 0000000000000030 x 7: 00000000ff8e0188 x 8: 00000000000001e0 x 9: 0000000000000000 x10: 000000000007fcdc x11: 00000000002881b8 x12: 00000000000001a2 x13: 0000000000000198 x14: 000000000007fdcc x15: 00000000002881b8 x16: 00000000003c0724 x17: 00000000003c0718 x18: 000000000007fe80 x19: 00000000ff8e0000 x20: 0000000000200000 x21: 00000000ff8e0000 x22: 0000000000000000 x23: 000000000007fe30 x24: 00000000ff8d1c3c x25: 00000000ff8d5000 x26: 00000000deadbeef x27: 00000000000004a0 x28: 000000000000009c x29: 000000000007fd90
Fix it by using the entry point from the elf header.
Signed-off-by: Mian Yousaf Kaukab yousaf.kaukab@suse.com --- arch/arm/mach-rockchip/make_fit_atf.py | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-rockchip/make_fit_atf.py b/arch/arm/mach-rockchip/make_fit_atf.py index 6b3d9201c9..b88a5e1f16 100755 --- a/arch/arm/mach-rockchip/make_fit_atf.py +++ b/arch/arm/mach-rockchip/make_fit_atf.py @@ -53,7 +53,7 @@ DT_END=""" }; """
-def append_atf_node(file, atf_index, phy_addr): +def append_atf_node(file, atf_index, phy_addr, elf_entry): """ Append ATF DT node to input FIT dts file. """ @@ -67,7 +67,7 @@ def append_atf_node(file, atf_index, phy_addr): print >> file, '\t\t\tcompression = "none";' print >> file, '\t\t\tload = <0x%08x>;' % phy_addr if atf_index == 1: - print >> file, '\t\t\tentry = <0x%08x>;' % phy_addr + print >> file, '\t\t\tentry = <0x%08x>;' % elf_entry print >> file, '\t\t};' print >> file, ''
@@ -141,12 +141,13 @@ def generate_atf_fit_dts(fit_file_name, bl31_file_name, uboot_file_name, dtbs_fi
with open(bl31_file_name) as bl31_file: bl31 = ELFFile(bl31_file) + elf_entry = bl31.header['e_entry'] for i in range(bl31.num_segments()): seg = bl31.get_segment(i) if ('PT_LOAD' == seg.__getitem__(ELF_SEG_P_TYPE)): paddr = seg.__getitem__(ELF_SEG_P_PADDR) p= seg.__getitem__(ELF_SEG_P_PADDR) - append_atf_node(fit_file, i+1, paddr) + append_atf_node(fit_file, i+1, paddr, elf_entry) atf_cnt = i+1 append_fdt_node(fit_file, dtbs_file_name) print >> fit_file, '%s' % DT_IMAGES_NODE_END