nand_spl_load_image() can also be used for non TPL framework.
Signed-off-by: Prabhakar Kushwaha prabhakar@freescale.com --- Changes for v2: - Made nand_spl_load_image as default declaration
drivers/mtd/nand/fsl_ifc_spl.c | 13 ------------- 1 file changed, 13 deletions(-)
diff --git a/drivers/mtd/nand/fsl_ifc_spl.c b/drivers/mtd/nand/fsl_ifc_spl.c index 2f82f7c..5100772 100644 --- a/drivers/mtd/nand/fsl_ifc_spl.c +++ b/drivers/mtd/nand/fsl_ifc_spl.c @@ -88,11 +88,7 @@ static inline int bad_block(uchar *marker, int port_size) return __raw_readw((u16 *)marker) != 0xffff; }
-#ifdef CONFIG_TPL_BUILD int nand_spl_load_image(uint32_t offs, unsigned int uboot_size, void *vdst) -#else -static int nand_load(uint32_t offs, unsigned int uboot_size, void *vdst) -#endif { struct fsl_ifc *ifc = IFC_BASE_ADDR; uchar *buf = (uchar *)CONFIG_SYS_NAND_BASE; @@ -218,15 +214,6 @@ static int nand_load(uint32_t offs, unsigned int uboot_size, void *vdst) }
/* - * Defines a static function nand_load_image() here, because non-static makes - * the code too large for certain SPLs(minimal SPL, maximum size <= 4Kbytes) - */ -#ifndef CONFIG_TPL_BUILD -#define nand_spl_load_image(offs, uboot_size, vdst) \ - nand_load(offs, uboot_size, vdst) -#endif - -/* * Main entrypoint for NAND Boot. It's necessary that SDRAM is already * configured and available since this code loads the main U-boot image * from NAND into SDRAM and starts from there.