This is not used since this commit:
570c3dcfc15 arm: Remove spear600 boards and the rest of SPEAr support
Drop the driver and Kconfig option.
Signed-off-by: Simon Glass sjg@chromium.org ---
drivers/mtd/nand/raw/Makefile | 1 - drivers/mtd/nand/raw/fsmc_nand.c | 470 ------------------------------- include/linux/mtd/fsmc_nand.h | 84 ------ 3 files changed, 555 deletions(-) delete mode 100644 drivers/mtd/nand/raw/fsmc_nand.c delete mode 100644 include/linux/mtd/fsmc_nand.h
diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile index e8764cf358b..f004eb39f3b 100644 --- a/drivers/mtd/nand/raw/Makefile +++ b/drivers/mtd/nand/raw/Makefile @@ -56,7 +56,6 @@ obj-$(CONFIG_NAND_DENALI) += denali.o obj-$(CONFIG_NAND_DENALI_DT) += denali_dt.o obj-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_nand.o obj-$(CONFIG_NAND_FSL_IFC) += fsl_ifc_nand.o -obj-$(CONFIG_NAND_FSMC) += fsmc_nand.o obj-$(CONFIG_NAND_KB9202) += kb9202_nand.o obj-$(CONFIG_NAND_KIRKWOOD) += kirkwood_nand.o obj-$(CONFIG_NAND_KMETER1) += kmeter1_nand.o diff --git a/drivers/mtd/nand/raw/fsmc_nand.c b/drivers/mtd/nand/raw/fsmc_nand.c deleted file mode 100644 index d795864949c..00000000000 --- a/drivers/mtd/nand/raw/fsmc_nand.c +++ /dev/null @@ -1,470 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2010 - * Vipin Kumar, STMicroelectronics, vipin.kumar@st.com. - * - * (C) Copyright 2012 - * Amit Virdi, STMicroelectronics, amit.virdi@st.com. - */ - -#include <common.h> -#include <nand.h> -#include <asm/io.h> -#include <linux/bitops.h> -#include <linux/err.h> -#include <linux/mtd/nand_ecc.h> -#include <linux/mtd/rawnand.h> -#include <linux/mtd/fsmc_nand.h> -#include <asm/arch/hardware.h> - -static u32 fsmc_version; -static struct fsmc_regs *const fsmc_regs_p = (struct fsmc_regs *) - CONFIG_SYS_FSMC_BASE; - -/* - * ECC4 and ECC1 have 13 bytes and 3 bytes of ecc respectively for 512 bytes of - * data. ECC4 can correct up to 8 bits in 512 bytes of data while ECC1 can - * correct 1 bit in 512 bytes - */ - -static struct nand_ecclayout fsmc_ecc4_lp_layout = { - .eccbytes = 104, - .eccpos = { 2, 3, 4, 5, 6, 7, 8, - 9, 10, 11, 12, 13, 14, - 18, 19, 20, 21, 22, 23, 24, - 25, 26, 27, 28, 29, 30, - 34, 35, 36, 37, 38, 39, 40, - 41, 42, 43, 44, 45, 46, - 50, 51, 52, 53, 54, 55, 56, - 57, 58, 59, 60, 61, 62, - 66, 67, 68, 69, 70, 71, 72, - 73, 74, 75, 76, 77, 78, - 82, 83, 84, 85, 86, 87, 88, - 89, 90, 91, 92, 93, 94, - 98, 99, 100, 101, 102, 103, 104, - 105, 106, 107, 108, 109, 110, - 114, 115, 116, 117, 118, 119, 120, - 121, 122, 123, 124, 125, 126 - }, - .oobfree = { - {.offset = 15, .length = 3}, - {.offset = 31, .length = 3}, - {.offset = 47, .length = 3}, - {.offset = 63, .length = 3}, - {.offset = 79, .length = 3}, - {.offset = 95, .length = 3}, - {.offset = 111, .length = 3}, - {.offset = 127, .length = 1} - } -}; - -/* - * ECC4 layout for NAND of pagesize 4096 bytes & OOBsize 224 bytes. 13*8 bytes - * of OOB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block & 118 - * bytes are free for use. - */ -static struct nand_ecclayout fsmc_ecc4_224_layout = { - .eccbytes = 104, - .eccpos = { 2, 3, 4, 5, 6, 7, 8, - 9, 10, 11, 12, 13, 14, - 18, 19, 20, 21, 22, 23, 24, - 25, 26, 27, 28, 29, 30, - 34, 35, 36, 37, 38, 39, 40, - 41, 42, 43, 44, 45, 46, - 50, 51, 52, 53, 54, 55, 56, - 57, 58, 59, 60, 61, 62, - 66, 67, 68, 69, 70, 71, 72, - 73, 74, 75, 76, 77, 78, - 82, 83, 84, 85, 86, 87, 88, - 89, 90, 91, 92, 93, 94, - 98, 99, 100, 101, 102, 103, 104, - 105, 106, 107, 108, 109, 110, - 114, 115, 116, 117, 118, 119, 120, - 121, 122, 123, 124, 125, 126 - }, - .oobfree = { - {.offset = 15, .length = 3}, - {.offset = 31, .length = 3}, - {.offset = 47, .length = 3}, - {.offset = 63, .length = 3}, - {.offset = 79, .length = 3}, - {.offset = 95, .length = 3}, - {.offset = 111, .length = 3}, - {.offset = 127, .length = 97} - } -}; - -/* - * ECC placement definitions in oobfree type format - * There are 13 bytes of ecc for every 512 byte block and it has to be read - * consecutively and immediately after the 512 byte data block for hardware to - * generate the error bit offsets in 512 byte data - * Managing the ecc bytes in the following way makes it easier for software to - * read ecc bytes consecutive to data bytes. This way is similar to - * oobfree structure maintained already in u-boot nand driver - */ -static struct fsmc_eccplace fsmc_eccpl_lp = { - .eccplace = { - {.offset = 2, .length = 13}, - {.offset = 18, .length = 13}, - {.offset = 34, .length = 13}, - {.offset = 50, .length = 13}, - {.offset = 66, .length = 13}, - {.offset = 82, .length = 13}, - {.offset = 98, .length = 13}, - {.offset = 114, .length = 13} - } -}; - -static struct nand_ecclayout fsmc_ecc4_sp_layout = { - .eccbytes = 13, - .eccpos = { 0, 1, 2, 3, 6, 7, 8, - 9, 10, 11, 12, 13, 14 - }, - .oobfree = { - {.offset = 15, .length = 1}, - } -}; - -static struct fsmc_eccplace fsmc_eccpl_sp = { - .eccplace = { - {.offset = 0, .length = 4}, - {.offset = 6, .length = 9} - } -}; - -static struct nand_ecclayout fsmc_ecc1_layout = { - .eccbytes = 24, - .eccpos = {2, 3, 4, 18, 19, 20, 34, 35, 36, 50, 51, 52, - 66, 67, 68, 82, 83, 84, 98, 99, 100, 114, 115, 116}, - .oobfree = { - {.offset = 8, .length = 8}, - {.offset = 24, .length = 8}, - {.offset = 40, .length = 8}, - {.offset = 56, .length = 8}, - {.offset = 72, .length = 8}, - {.offset = 88, .length = 8}, - {.offset = 104, .length = 8}, - {.offset = 120, .length = 8} - } -}; - -/* Count the number of 0's in buff upto a max of max_bits */ -static int count_written_bits(uint8_t *buff, int size, int max_bits) -{ - int k, written_bits = 0; - - for (k = 0; k < size; k++) { - written_bits += hweight8(~buff[k]); - if (written_bits > max_bits) - break; - } - - return written_bits; -} - -static void fsmc_nand_hwcontrol(struct mtd_info *mtd, int cmd, uint ctrl) -{ - struct nand_chip *this = mtd_to_nand(mtd); - ulong IO_ADDR_W; - - if (ctrl & NAND_CTRL_CHANGE) { - IO_ADDR_W = (ulong)this->IO_ADDR_W; - - IO_ADDR_W &= ~(CONFIG_SYS_NAND_CLE | CONFIG_SYS_NAND_ALE); - if (ctrl & NAND_CLE) - IO_ADDR_W |= CONFIG_SYS_NAND_CLE; - if (ctrl & NAND_ALE) - IO_ADDR_W |= CONFIG_SYS_NAND_ALE; - - if (ctrl & NAND_NCE) { - writel(readl(&fsmc_regs_p->pc) | - FSMC_ENABLE, &fsmc_regs_p->pc); - } else { - writel(readl(&fsmc_regs_p->pc) & - ~FSMC_ENABLE, &fsmc_regs_p->pc); - } - this->IO_ADDR_W = (void *)IO_ADDR_W; - } - - if (cmd != NAND_CMD_NONE) - writeb(cmd, this->IO_ADDR_W); -} - -static int fsmc_bch8_correct_data(struct mtd_info *mtd, u_char *dat, - u_char *read_ecc, u_char *calc_ecc) -{ - /* The calculated ecc is actually the correction index in data */ - u32 err_idx[8]; - u32 num_err, i; - u32 ecc1, ecc2, ecc3, ecc4; - - num_err = (readl(&fsmc_regs_p->sts) >> 10) & 0xF; - - if (likely(num_err == 0)) - return 0; - - if (unlikely(num_err > 8)) { - /* - * This is a temporary erase check. A newly erased page read - * would result in an ecc error because the oob data is also - * erased to FF and the calculated ecc for an FF data is not - * FF..FF. - * This is a workaround to skip performing correction in case - * data is FF..FF - * - * Logic: - * For every page, each bit written as 0 is counted until these - * number of bits are greater than 8 (the maximum correction - * capability of FSMC for each 512 + 13 bytes) - */ - - int bits_ecc = count_written_bits(read_ecc, 13, 8); - int bits_data = count_written_bits(dat, 512, 8); - - if ((bits_ecc + bits_data) <= 8) { - if (bits_data) - memset(dat, 0xff, 512); - return bits_data + bits_ecc; - } - - return -EBADMSG; - } - - ecc1 = readl(&fsmc_regs_p->ecc1); - ecc2 = readl(&fsmc_regs_p->ecc2); - ecc3 = readl(&fsmc_regs_p->ecc3); - ecc4 = readl(&fsmc_regs_p->sts); - - err_idx[0] = (ecc1 >> 0) & 0x1FFF; - err_idx[1] = (ecc1 >> 13) & 0x1FFF; - err_idx[2] = (((ecc2 >> 0) & 0x7F) << 6) | ((ecc1 >> 26) & 0x3F); - err_idx[3] = (ecc2 >> 7) & 0x1FFF; - err_idx[4] = (((ecc3 >> 0) & 0x1) << 12) | ((ecc2 >> 20) & 0xFFF); - err_idx[5] = (ecc3 >> 1) & 0x1FFF; - err_idx[6] = (ecc3 >> 14) & 0x1FFF; - err_idx[7] = (((ecc4 >> 16) & 0xFF) << 5) | ((ecc3 >> 27) & 0x1F); - - i = 0; - while (i < num_err) { - err_idx[i] ^= 3; - - if (err_idx[i] < 512 * 8) - __change_bit(err_idx[i], dat); - - i++; - } - - return num_err; -} - -static int fsmc_read_hwecc(struct mtd_info *mtd, - const u_char *data, u_char *ecc) -{ - u_int ecc_tmp; - int timeout = CONFIG_SYS_HZ; - ulong start; - - switch (fsmc_version) { - case FSMC_VER8: - start = get_timer(0); - while (get_timer(start) < timeout) { - /* - * Busy waiting for ecc computation - * to finish for 512 bytes - */ - if (readl(&fsmc_regs_p->sts) & FSMC_CODE_RDY) - break; - } - - ecc_tmp = readl(&fsmc_regs_p->ecc1); - ecc[0] = (u_char) (ecc_tmp >> 0); - ecc[1] = (u_char) (ecc_tmp >> 8); - ecc[2] = (u_char) (ecc_tmp >> 16); - ecc[3] = (u_char) (ecc_tmp >> 24); - - ecc_tmp = readl(&fsmc_regs_p->ecc2); - ecc[4] = (u_char) (ecc_tmp >> 0); - ecc[5] = (u_char) (ecc_tmp >> 8); - ecc[6] = (u_char) (ecc_tmp >> 16); - ecc[7] = (u_char) (ecc_tmp >> 24); - - ecc_tmp = readl(&fsmc_regs_p->ecc3); - ecc[8] = (u_char) (ecc_tmp >> 0); - ecc[9] = (u_char) (ecc_tmp >> 8); - ecc[10] = (u_char) (ecc_tmp >> 16); - ecc[11] = (u_char) (ecc_tmp >> 24); - - ecc_tmp = readl(&fsmc_regs_p->sts); - ecc[12] = (u_char) (ecc_tmp >> 16); - break; - - default: - ecc_tmp = readl(&fsmc_regs_p->ecc1); - ecc[0] = (u_char) (ecc_tmp >> 0); - ecc[1] = (u_char) (ecc_tmp >> 8); - ecc[2] = (u_char) (ecc_tmp >> 16); - break; - } - - return 0; -} - -void fsmc_enable_hwecc(struct mtd_info *mtd, int mode) -{ - writel(readl(&fsmc_regs_p->pc) & ~FSMC_ECCPLEN_256, - &fsmc_regs_p->pc); - writel(readl(&fsmc_regs_p->pc) & ~FSMC_ECCEN, - &fsmc_regs_p->pc); - writel(readl(&fsmc_regs_p->pc) | FSMC_ECCEN, - &fsmc_regs_p->pc); -} - -/* - * fsmc_read_page_hwecc - * @mtd: mtd info structure - * @chip: nand chip info structure - * @buf: buffer to store read data - * @oob_required: caller expects OOB data read to chip->oob_poi - * @page: page number to read - * - * This routine is needed for fsmc verison 8 as reading from NAND chip has to be - * performed in a strict sequence as follows: - * data(512 byte) -> ecc(13 byte) - * After this read, fsmc hardware generates and reports error data bits(upto a - * max of 8 bits) - */ -static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf, int oob_required, int page) -{ - struct fsmc_eccplace *fsmc_eccpl; - int i, j, s, stat, eccsize = chip->ecc.size; - int eccbytes = chip->ecc.bytes; - int eccsteps = chip->ecc.steps; - uint8_t *p = buf; - uint8_t *ecc_calc = chip->buffers->ecccalc; - uint8_t *ecc_code = chip->buffers->ecccode; - int off, len, group = 0; - uint8_t oob[13] __attribute__ ((aligned (2))); - - /* Differentiate between small and large page ecc place definitions */ - if (mtd->writesize == 512) - fsmc_eccpl = &fsmc_eccpl_sp; - else - fsmc_eccpl = &fsmc_eccpl_lp; - - for (i = 0, s = 0; s < eccsteps; s++, i += eccbytes, p += eccsize) { - - chip->cmdfunc(mtd, NAND_CMD_READ0, s * eccsize, page); - chip->ecc.hwctl(mtd, NAND_ECC_READ); - chip->read_buf(mtd, p, eccsize); - - for (j = 0; j < eccbytes;) { - off = fsmc_eccpl->eccplace[group].offset; - len = fsmc_eccpl->eccplace[group].length; - group++; - - /* - * length is intentionally kept a higher multiple of 2 - * to read at least 13 bytes even in case of 16 bit NAND - * devices - */ - if (chip->options & NAND_BUSWIDTH_16) - len = roundup(len, 2); - chip->cmdfunc(mtd, NAND_CMD_READOOB, off, page); - chip->read_buf(mtd, oob + j, len); - j += len; - } - - memcpy(&ecc_code[i], oob, 13); - chip->ecc.calculate(mtd, p, &ecc_calc[i]); - - stat = chip->ecc.correct(mtd, p, &ecc_code[i], - &ecc_calc[i]); - if (stat < 0) - mtd->ecc_stats.failed++; - else - mtd->ecc_stats.corrected += stat; - } - - return 0; -} - -int fsmc_nand_init(struct nand_chip *nand) -{ - static int chip_nr; - struct mtd_info *mtd; - u32 peripid2 = readl(&fsmc_regs_p->peripid2); - - fsmc_version = (peripid2 >> FSMC_REVISION_SHFT) & - FSMC_REVISION_MSK; - - writel(readl(&fsmc_regs_p->ctrl) | FSMC_WP, &fsmc_regs_p->ctrl); - -#if defined(CONFIG_SYS_FSMC_NAND_16BIT) - writel(FSMC_DEVWID_16 | FSMC_DEVTYPE_NAND | FSMC_ENABLE | FSMC_WAITON, - &fsmc_regs_p->pc); -#elif defined(CONFIG_SYS_FSMC_NAND_8BIT) - writel(FSMC_DEVWID_8 | FSMC_DEVTYPE_NAND | FSMC_ENABLE | FSMC_WAITON, - &fsmc_regs_p->pc); -#else -#error Please define CONFIG_SYS_FSMC_NAND_16BIT or CONFIG_SYS_FSMC_NAND_8BIT -#endif - writel(readl(&fsmc_regs_p->pc) | FSMC_TCLR_1 | FSMC_TAR_1, - &fsmc_regs_p->pc); - writel(FSMC_THIZ_1 | FSMC_THOLD_4 | FSMC_TWAIT_6 | FSMC_TSET_0, - &fsmc_regs_p->comm); - writel(FSMC_THIZ_1 | FSMC_THOLD_4 | FSMC_TWAIT_6 | FSMC_TSET_0, - &fsmc_regs_p->attrib); - - nand->options = 0; -#if defined(CONFIG_SYS_FSMC_NAND_16BIT) - nand->options |= NAND_BUSWIDTH_16; -#endif - nand->ecc.mode = NAND_ECC_HW; - nand->ecc.size = 512; - nand->ecc.calculate = fsmc_read_hwecc; - nand->ecc.hwctl = fsmc_enable_hwecc; - nand->cmd_ctrl = fsmc_nand_hwcontrol; - nand->IO_ADDR_R = nand->IO_ADDR_W = - (void __iomem *)CFG_SYS_NAND_BASE; - nand->badblockbits = 7; - - mtd = nand_to_mtd(nand); - - switch (fsmc_version) { - case FSMC_VER8: - nand->ecc.bytes = 13; - nand->ecc.strength = 8; - nand->ecc.correct = fsmc_bch8_correct_data; - nand->ecc.read_page = fsmc_read_page_hwecc; - if (mtd->writesize == 512) - nand->ecc.layout = &fsmc_ecc4_sp_layout; - else { - if (mtd->oobsize == 224) - nand->ecc.layout = &fsmc_ecc4_224_layout; - else - nand->ecc.layout = &fsmc_ecc4_lp_layout; - } - - break; - default: - nand->ecc.bytes = 3; - nand->ecc.strength = 1; - nand->ecc.layout = &fsmc_ecc1_layout; - nand->ecc.correct = nand_correct_data; - break; - } - - /* Detect NAND chips */ - if (nand_scan_ident(mtd, CONFIG_SYS_MAX_NAND_DEVICE, NULL)) - return -ENXIO; - - if (nand_scan_tail(mtd)) - return -ENXIO; - - if (nand_register(chip_nr++, mtd)) - return -ENXIO; - - return 0; -} diff --git a/include/linux/mtd/fsmc_nand.h b/include/linux/mtd/fsmc_nand.h deleted file mode 100644 index 1d8a067f17e..00000000000 --- a/include/linux/mtd/fsmc_nand.h +++ /dev/null @@ -1,84 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2010 - * Vipin Kumar, STMicroelectronics, vipin.kumar@st.com. - */ - -#ifndef __FSMC_NAND_H__ -#define __FSMC_NAND_H__ - -#include <linux/mtd/rawnand.h> - -struct fsmc_regs { - u32 ctrl; /* 0x00 */ - u8 reserved_1[0x40 - 0x04]; - u32 pc; /* 0x40 */ - u32 sts; /* 0x44 */ - u32 comm; /* 0x48 */ - u32 attrib; /* 0x4c */ - u32 ioata; /* 0x50 */ - u32 ecc1; /* 0x54 */ - u32 ecc2; /* 0x58 */ - u32 ecc3; /* 0x5c */ - u8 reserved_2[0xfe0 - 0x60]; - u32 peripid0; /* 0xfe0 */ - u32 peripid1; /* 0xfe4 */ - u32 peripid2; /* 0xfe8 */ - u32 peripid3; /* 0xfec */ - u32 pcellid0; /* 0xff0 */ - u32 pcellid1; /* 0xff4 */ - u32 pcellid2; /* 0xff8 */ - u32 pcellid3; /* 0xffc */ -}; - -/* ctrl register definitions */ -#define FSMC_WP (1 << 7) - -/* pc register definitions */ -#define FSMC_RESET (1 << 0) -#define FSMC_WAITON (1 << 1) -#define FSMC_ENABLE (1 << 2) -#define FSMC_DEVTYPE_NAND (1 << 3) -#define FSMC_DEVWID_8 (0 << 4) -#define FSMC_DEVWID_16 (1 << 4) -#define FSMC_ECCEN (1 << 6) -#define FSMC_ECCPLEN_512 (0 << 7) -#define FSMC_ECCPLEN_256 (1 << 7) -#define FSMC_TCLR_1 (1 << 9) -#define FSMC_TAR_1 (1 << 13) - -/* sts register definitions */ -#define FSMC_CODE_RDY (1 << 15) - -/* comm register definitions */ -#define FSMC_TSET_0 (0 << 0) -#define FSMC_TWAIT_6 (6 << 8) -#define FSMC_THOLD_4 (4 << 16) -#define FSMC_THIZ_1 (1 << 24) - -/* peripid2 register definitions */ -#define FSMC_REVISION_MSK (0xf) -#define FSMC_REVISION_SHFT (0x4) - -#define FSMC_VER8 0x8 - -/* - * There are 13 bytes of ecc for every 512 byte block and it has to be read - * consecutively and immediately after the 512 byte data block for hardware to - * generate the error bit offsets - * Managing the ecc bytes in the following way is easier. This way is similar to - * oobfree structure maintained already in u-boot nand driver - */ -#define FSMC_MAX_ECCPLACE_ENTRIES 32 - -struct fsmc_nand_eccplace { - u32 offset; - u32 length; -}; - -struct fsmc_eccplace { - struct fsmc_nand_eccplace eccplace[FSMC_MAX_ECCPLACE_ENTRIES]; -}; - -extern int fsmc_nand_init(struct nand_chip *nand); -#endif