Hi,
Currently I am working on an Nvidia Jetson Tk1 board.
With u-boot v2016.05 I am seeing the following messages on the start up
[ 0.000000] Tegra clk 127: register failed with -17 [ 0.004488] /cpus/cpu@0 missing clock-frequency property [ 0.008002] /cpus/cpu@1 missing clock-frequency property [ 0.013406] /cpus/cpu@2 missing clock-frequency property [ 0.018751] /cpus/cpu@3 missing clock-frequency property [ 0.879130] +USB0_VBUS_SW: Failed to request enable GPIO108: -517 [ 0.883400] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.891700] +5V_USB_HS: Failed to request enable GPIO109: -517 [ 0.897438] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.905852] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.912605] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.920982] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.926818] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.935194] +5V_SATA: Failed to request enable GPIO242: -517 [ 0.940771] reg-fixed-voltage regulators:regulator@13: Failed to register regulator: -517 [ 0.949148] +12V_SATA: Failed to request enable GPIO242: -517 [ 0.954811] reg-fixed-voltage regulators:regulator@14: Failed to register regulator: -517 [ 2.740489] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 2.757663] tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517 [ 2.784372] serial-tegra serial@70006000: failed to get alias id, errno -19 [ 2.791460] serial-tegra serial@70006040: failed to get alias id, errno -19
I am not sure about what's the issue here. Google search shows something might be missing in the device tree. Can you let me know whats the issue here.
Mit Freundlichen Grüßen VinothKumar