Fdt entry for Exynos TMU driver specific pre-defined values used for calibration of current temperature and defining threshold values.
Signed-off-by: Akshay Saraswat akshay.s@samsung.com --- Changes since v4: - Rebased this patch.
arch/arm/dts/exynos5250.dtsi | 5 +++++ board/samsung/dts/exynos5250-smdk5250.dts | 13 +++++++++++ doc/device-tree-bindings/exynos/tmu.txt | 35 +++++++++++++++++++++++++++++ include/fdtdec.h | 1 + lib/fdtdec.c | 1 + 5 files changed, 55 insertions(+) create mode 100644 doc/device-tree-bindings/exynos/tmu.txt
diff --git a/arch/arm/dts/exynos5250.dtsi b/arch/arm/dts/exynos5250.dtsi index ed8c8dd..b2ef42e 100644 --- a/arch/arm/dts/exynos5250.dtsi +++ b/arch/arm/dts/exynos5250.dtsi @@ -151,4 +151,9 @@ }; };
+ tmu@10060000 { + compatible = "samsung,exynos-tmu"; + reg = <0x10060000 0xffff>; + }; + }; diff --git a/board/samsung/dts/exynos5250-smdk5250.dts b/board/samsung/dts/exynos5250-smdk5250.dts index cbfab6f..f49ca44 100644 --- a/board/samsung/dts/exynos5250-smdk5250.dts +++ b/board/samsung/dts/exynos5250-smdk5250.dts @@ -66,4 +66,17 @@ compatible = "maxim,max77686_pmic"; }; }; + + tmu@10060000 { + samsung,mux = <6>; + samsung,min-temp = <25>; + samsung,max-temp = <125>; + samsung,start-warning = <95>; + samsung,start-tripping = <105>; + samsung,efuse-min-value = <40>; + samsung,efuse-value = <55>; + samsung,efuse-max-value = <100>; + samsung,slope = <268470274>; + samsung,dc-value = <25>; + }; }; diff --git a/doc/device-tree-bindings/exynos/tmu.txt b/doc/device-tree-bindings/exynos/tmu.txt new file mode 100644 index 0000000..ed1e22a --- /dev/null +++ b/doc/device-tree-bindings/exynos/tmu.txt @@ -0,0 +1,35 @@ +Exynos Thermal management Unit + +The device node for TMU that is a part of Exynos5250 +SOC is as described in the document "Open Firmware Recommended +Practic : Universal Serial Bus" with the following modifications +and additions: + +Required properties : + - compatible : Should be "samsung,exynos-tmu" for TMU + - samsung,mux : mux Address for the TMU to enable TMU core + - samsung,min-temp : Minimum temperature, default is 25 + - samsung,max-temp : Maximum temperature, defalut set to 125 + - samsung,start-warning : temp at which TMU start giving warning + - samsung,start-tripping : temp at which system will trip and shutdown + - samsung,efuse-min-value : SOC efuse min value + - samsung,efuse-value : SOC actual efuse value + - samsung,efuse-max-value : SoC max efuse value + - samsung,slope : Gain of amplifier, default is 268470274 + - samsung,dc-value : DC value of TMU, default is 25 + +Example: + +tmu@10060000 { + compatible = "samsung,exynos-tmu" + samsung,mux = <6>; + samsung,min-temp = <25>; + samsung,max-temp = <125>; + samsung,start-warning = <95>; + samsung,start-tripping = <105>; + samsung,efuse-min-value = <40>; + samsung,efuse-value = <55>; + samsung,efuse-max-value = <100>; + samsung,slope = <268470274>; + samsung,dc-value = <25>; +}; diff --git a/include/fdtdec.h b/include/fdtdec.h index f77d195..058fb51 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -79,6 +79,7 @@ enum fdt_compat_id { COMPAT_SAMSUNG_EXYNOS_EHCI, /* Exynos EHCI controller */ COMPAT_SAMSUNG_EXYNOS_USB_PHY, /* Exynos phy controller for usb2.0 */ COMPAT_MAXIM_MAX77686_PMIC, /* MAX77686 PMIC */ + COMPAT_SAMSUNG_EXYNOS_TMU, /* Exynos TMU */
COMPAT_COUNT, }; diff --git a/lib/fdtdec.c b/lib/fdtdec.c index 16921e1..4613fcd 100644 --- a/lib/fdtdec.c +++ b/lib/fdtdec.c @@ -54,6 +54,7 @@ static const char * const compat_names[COMPAT_COUNT] = { COMPAT(SAMSUNG_EXYNOS_EHCI, "samsung,exynos-ehci"), COMPAT(SAMSUNG_EXYNOS_USB_PHY, "samsung,exynos-usb-phy"), COMPAT(MAXIM_MAX77686_PMIC, "maxim,max77686_pmic"), + COMPAT(SAMSUNG_EXYNOS_TMU, "samsung,exynos-tmu"), };
const char *fdtdec_get_compatible(enum fdt_compat_id id)