Le 31/10/2010 20:59, Wolfgang Denk a écrit :
Dear Albert ARIBAUD,
In message4CCDC625.3010209@free.fr you wrote:
Can you enable DEBUG globally and capture the u-boot output in a terminal?
Here it is:
U-Boot 2010.12-rc1-00027-g03ab00d-dirty (Oct 31 2010 - 20:57:21)
U-Boot code: 81200000 -> 81226E50 BSS: -> 81230758
Weird... display_banner() is called before relocation and uses whatever the linker put in the literals; but these values above do not match those of the u-boot you sent me last.
According to the .map, the *whole* of the tx25 image ends at 0x81230398, and BSS itself goes from 0x812235f4 to 0x8122c700. So *before* relocation there already is an issue.
Can you double-check that the u-boot you sent me is the one you ran?
monitor len: 00030758
Should have been 0x2c700.
Best regards,
Wolfgang Denk
Amicalement,