Am 07.11.24 um 09:23 schrieb Yannic Moog:
Add documentation for the phyBOARD-Pollux i.MX 8M Plus on OP-TEE integration. Also add missing '-' to TF-A build instruction while at it.
Would it make sense to move these instructions into a more general section, so they could be reused by other imx based boards as well?
Seems you missed to update imx8mm-phygate-tauri-l.rst
Signed-off-by: Yannic Moog y.moog@phytec.de
doc/board/phytec/phycore-imx8mp.rst | 26 +++++++++++++++++++++++++- 1 file changed, 25 insertions(+), 1 deletion(-)
diff --git a/doc/board/phytec/phycore-imx8mp.rst b/doc/board/phytec/phycore-imx8mp.rst index fda751aeffb..4bcfa9f39ca 100644 --- a/doc/board/phytec/phycore-imx8mp.rst +++ b/doc/board/phytec/phycore-imx8mp.rst @@ -9,6 +9,7 @@ Quick Start
- Build the ARM Trusted firmware binary
+- Build the OP-TEE binary (optional)
- Get ddr firmware
- Build U-Boot
- Boot
@@ -20,10 +21,32 @@ Build the ARM Trusted firmware binary
$ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git $ cd trusted-firmware-a
- $ export CROSS_COMPILE=aarch64-linux-gnu
- $ export CROSS_COMPILE=aarch64-linux-gnu- $ export IMX_BOOT_UART_BASE=0x30860000
- $ # with optee
- $ make PLAT=imx8mp SPD=opteed bl31
- $ # without optee $ make PLAT=imx8mp bl31
+Build the OP-TEE binary (optional) +----------------------------------
+.. code-block:: bash
- $ git clone https://github.com/OP-TEE/optee_os.git
- $ cd optee_os
- $ make CFG_ARM64_core=y \
CFG_TEE_BENCHMARK=n \CROSS_COMPILE=aarch64-linux-gnu- \CROSS_COMPILE_core=aarch64-linux-gnu- \CROSS_COMPILE_ta_arm32=arm-linux-gnueabihf- \CROSS_COMPILE_ta_arm64=aarch64-linux-gnu- \O=out/arm \PLATFORM=imx-mx8mpevk \CFG_TZDRAM_START=0x56000000 \CFG_DDR_SIZE=0x80000000 \CFG_UART_BASE=UART1_BASEGet the ddr firmware
@@ -42,6 +65,7 @@ Copy binaries .. code-block:: bash
$ cp <TF-A dir>/build/imx8mp/release/bl31.bin .
$ cp <OP-TEE dir>/out/arm/core/tee-raw.bin tee.bin $ cp firmware-imx-8.19/firmware/ddr/synopsys/lpddr4*.bin .
Build U-Boot