Re: [PATCH v2] power-domain: fix hang in endless loop on i.MX8

On Mon, Feb 17, 2020 at 2:27 PM Fabio Estevam festevam@gmail.com wrote:

I also had to apply the following change in order to boot a i.MX8QXP MEK board:

--- a/arch/arm/mach-imx/imx8/fdt.c +++ b/arch/arm/mach-imx/imx8/fdt.c @@ -280,6 +280,8 @@ int ft_system_setup(void *blob, bd_t *bd) { int ret;

•   return 0;
  

•   update_fdt_with_owned_resources(blob);
  
    if (is_imx8qm()) {
  
  

With your patch and this change a 4.14.98 NXP kernel can boot, but not a 4.19.35 NXP nor a mainline kernel.

Tested-by: Fabio Estevam festevam@gmail.com

Correction: the above change is not needed now.

I saw an issue with the command line and I sent a fix.

This patch plus the one that fixes the command line are enough to get i.MX8QXP MEK board booting a mainline kernel.

Thanks