This patch adds support for the PM9263 board of Ronetix GmbH (www.ronetix.at)
Signed-off-by: Ilko Iliev iliev@ronetix.at
--- MAKEALL | 1 + Makefile | 3 + board/ronetix/pm9263/Makefile | 60 +++++ board/ronetix/pm9263/config.mk | 1 + board/ronetix/pm9263/led.c | 68 ++++++ board/ronetix/pm9263/lowlevel_init.S | 375 ++++++++++++++++++++++++++++++++ board/ronetix/pm9263/partition.c | 47 ++++ board/ronetix/pm9263/pm9263.c | 393 ++++++++++++++++++++++++++++++++++ board/ronetix/pm9263/pm9263_nand.c | 79 +++++++ common/lcd.c | 9 + cpu/arm926ejs/at91/lowlevel_init.S | 6 +- drivers/mtd/dataflash.c | 5 +- include/configs/pm9263.h | 285 ++++++++++++++++++++++++ tools/Makefile | 3 + tools/logos/ronetix.bmp | Bin 0 -> 5638 bytes 15 files changed, 1330 insertions(+), 5 deletions(-) mode change 100755 => 100644 MAKEALL create mode 100644 board/ronetix/pm9263/Makefile create mode 100644 board/ronetix/pm9263/config.mk create mode 100644 board/ronetix/pm9263/led.c create mode 100644 board/ronetix/pm9263/lowlevel_init.S create mode 100644 board/ronetix/pm9263/partition.c create mode 100644 board/ronetix/pm9263/pm9263.c create mode 100644 board/ronetix/pm9263/pm9263_nand.c create mode 100644 include/configs/pm9263.h create mode 100644 tools/logos/ronetix.bmp
diff --git a/MAKEALL b/MAKEALL old mode 100755 new mode 100644 index 9ccb9ac..bde7d73 --- a/MAKEALL +++ b/MAKEALL @@ -536,6 +536,7 @@ LIST_at91=" \ at91sam9260ek \ at91sam9261ek \ at91sam9263ek \ + pm9263 \ at91sam9rlek \ cmc_pu2 \ csb637 \ diff --git a/Makefile b/Makefile index 9055747..2772dd5 100644 --- a/Makefile +++ b/Makefile @@ -2493,6 +2493,9 @@ at91sam9261ek_config : unconfig at91sam9263ek_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9263ek atmel at91
+pm9263_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91 + at91sam9rlek_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9rlek atmel at91
diff --git a/board/ronetix/pm9263/Makefile b/board/ronetix/pm9263/Makefile new file mode 100644 index 0000000..df9ed4f --- /dev/null +++ b/board/ronetix/pm9263/Makefile @@ -0,0 +1,60 @@ +# +# (C) Copyright 2003-2008 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2008 +# Stelian Pop stelian.pop@leadtechdesign.com +# Lead Tech Design <www.leadtechdesign.com> +# Ilko Iliev <www.ronetix.at> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS-y += pm9263.o +COBJS-y += led.o +COBJS-y += partition.o +COBJS-$(CONFIG_CMD_NAND) += pm9263_nand.o + +SOBJS := lowlevel_init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/ronetix/pm9263/config.mk b/board/ronetix/pm9263/config.mk new file mode 100644 index 0000000..ff2cfd1 --- /dev/null +++ b/board/ronetix/pm9263/config.mk @@ -0,0 +1 @@ +TEXT_BASE = 0x23f00000 diff --git a/board/ronetix/pm9263/led.c b/board/ronetix/pm9263/led.c new file mode 100644 index 0000000..f86c7c3 --- /dev/null +++ b/board/ronetix/pm9263/led.c @@ -0,0 +1,68 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop stelian.pop@leadtechdesign.com + * Lead Tech Design <www.leadtechdesign.com> + * Ilko Iliev <www.ronetix.at> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/at91sam9263.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/gpio.h> +#include <asm/arch/io.h> + +#define RED_LED AT91_PIN_PB7 /* this is the power led */ +#define GREEN_LED AT91_PIN_PB8 /* this is the user1 led */ + +void red_LED_on(void) +{ + at91_set_gpio_value(RED_LED, 1); +} + +void red_LED_off(void) +{ + at91_set_gpio_value(RED_LED, 0); +} + +void green_LED_on(void) +{ + at91_set_gpio_value(GREEN_LED, 0); +} + +void green_LED_off(void) +{ + at91_set_gpio_value(GREEN_LED, 1); +} + + + +void coloured_LED_init(void) +{ + /* Enable clock */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_PIOB | + 1 << AT91SAM9263_ID_PIOCDE); + + at91_set_gpio_output(RED_LED, 1); + at91_set_gpio_output(GREEN_LED, 1); + + at91_set_gpio_value(RED_LED, 0); + at91_set_gpio_value(GREEN_LED, 1); +} diff --git a/board/ronetix/pm9263/lowlevel_init.S b/board/ronetix/pm9263/lowlevel_init.S new file mode 100644 index 0000000..de240b7 --- /dev/null +++ b/board/ronetix/pm9263/lowlevel_init.S @@ -0,0 +1,375 @@ +/* + * Memory Setup stuff - taken from blob memsetup.S + * + * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and + * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) + * + * Modified for the Ronetix PM9263 board by Ilko Iliev (www.ronetix.at) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <version.h> +#include <asm/arch/hardware.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_pio.h> + +#ifndef CONFIG_SKIP_LOWLEVEL_INIT + +#define SDRAM 0x20000000 /* address of the SDRAM */ + +/* clocks */ +#define MOR_VAL 0x00002001 /* CKGR_MOR - enable main osc. */ +#define PLLAR_VAL (0x2000BF00 | ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV)) +/* #define PLLAR_VAL 0x200CBF01 */ /* 239.616000 MHz for PCK */ +#define PLLBR_VAL 0x10483E0E /* 48.054857 MHz for USB) */ + +#define MCKR1_VAL 0x00000100 /* PCK/2 = MCK Master Clock from PLLA*/ +#define MCKR2_VAL 0x00000102 /* PCK/2 = MCK Master Clock from PLLA*/ + +#define AT91_PIOD_PDR (AT91_BASE_SYS + AT91_PIOD + PIO_PDR) +#define AT91_PIOD_PPUDR (AT91_BASE_SYS + AT91_PIOD + PIO_PUDR) +#define AT91_PIOD_ASR (AT91_BASE_SYS + AT91_PIOD + PIO_ASR) +#define AT91_CCFG_EBI0CSA (0xFFFFED20) /* (CCFG) EBI0 Chip Select */ +#define AT91_CCFG_EBI1CSA (0xFFFFED24) /* (CCFG) EBI1 Chip Select */ + +#define AT91_SMC0_CTRL0 (0xFFFFE40C) /* (SMC0) Control Register for CS 0 */ +#define AT91_SMC0_CYCLE0 (0xFFFFE408) /* (SMC0) Cycle Register for CS 0 */ +#define AT91_SMC0_SETUP0 (0xFFFFE400) /* (SMC0) Setup Register for CS 0 */ +#define AT91_SMC0_PULSE0 (0xFFFFE404) /* (SMC0) Pulse Register for CS 0 */ + +#define AT91_SMC1_CTRL0 (0xFFFFEA0C) /* (SMC1) Control Register for CS 0 */ +#define AT91_SMC1_CYCLE0 (0xFFFFEA08) /* (SMC1) Cycle Register for CS 0 */ +#define AT91_SMC1_SETUP0 (0xFFFFEA00) /* (SMC1) Setup Register for CS 0 */ +#define AT91_SMC1_PULSE0 (0xFFFFEA04) /* (SMC1) Pulse Register for CS 0 */ + +#define AT91_SDRAMC0_CR (0xFFFFE208) /* (SDRAMC0) SDRAM Configuration Reg.*/ +#define AT91_SDRAMC0_MR (0xFFFFE200) /* (SDRAMC0) SDRAM Mode Register */ +#define AT91_SDRAMC0_MDR (0xFFFFE224) /* (SDRAMC0) SDRAM Memory Device Reg.*/ +#define AT91_SDRAMC0_TR (0xFFFFE204) /* (SDRAMC0) SDRAM Refresh Timer Reg.*/ + +#define AT91_RSTC_RMR (0xFFFFFD08) /* (RSTC) Reset Mode Register */ + +#define PIOD_PDR_VAL1 0xFFFF0000 /* define PDC[31:16] as DATA[31:16] */ +#define PIOD_PPUDR_VAL 0xFFFF0000 /* no pull-up for D[31:16] */ +#define MATRIX_EBI0CSA_VAL 0x0001010A /* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */ +#define MATRIX_EBI1CSA_VAL 0x00010100 /* EBI1_CSA, 3.3v, no pull-ups*/ + +/* SDRAM */ +#define SDRC_MR_VAL1 0 /* SDRAMC_MR Mode register */ +#define SDRC_TR_VAL1 0x13C /* SDRAMC_TR - Refresh Timer register*/ +/*#define SDRC_CR_VAL 0x85237279*/ /* SDRAMC_CR - Configuration register*/ +/*#define SDRC_CR_VAL 0x85227259 CL2 */ +#define SDRC_CR_VAL 0x85227279 /*CL3*/ +#define SDRC_MDR_VAL 0 /* Memory Device Register -> SDRAM */ +#define SDRC_MR_VAL2 0x00000002 /* SDRAMC_MR */ +#define SDRAM_VAL1 0 /* SDRAM_BASE */ +#define SDRC_MR_VAL3 4 /* SDRC_MR */ +#define SDRAM_VAL2 0 /* SDRAM_BASE */ +#define SDRAM_VAL3 0 /* SDRAM_BASE */ +#define SDRAM_VAL4 0 /* SDRAM_BASE */ +#define SDRAM_VAL5 0 /* SDRAM_BASE */ +#define SDRAM_VAL6 0 /* SDRAM_BASE */ +#define SDRAM_VAL7 0 /* SDRAM_BASE */ +#define SDRAM_VAL8 0 /* SDRAM_BASE */ +#define SDRAM_VAL9 0 /* SDRAM_BASE */ +#define SDRC_MR_VAL4 3 /* SDRC_MR */ +#define SDRAM_VAL10 0 /* SDRAM_BASE */ +#define SDRC_MR_VAL5 0 /* SDRC_MR */ +#define SDRAM_VAL11 0 /* SDRAM_BASE */ +#define SDRC_TR_VAL2 1200 /* SDRAM_TR */ +#define SDRAM_VAL12 0 /* SDRAM_BASE */ + +/* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */ +#define SMC0_SETUP0_VAL 0x0A0A0A0A /* SMC_SETUP */ +#define SMC0_PULSE0_VAL 0x0B0B0B0B /* SMC_PULSE */ +#define SMC0_CYCLE0_VAL 0x00160016 /* SMC_CYCLE */ +#define SMC0_CTRL0_VAL 0x00161003 /* SMC_MODE */ + +/* setup SMC1, CS0 (PSRAM) - 16-bit */ +#define SMC1_SETUP0_VAL 0x00000000 /* SMC_SETUP */ +#define SMC1_PULSE0_VAL 0x07020707 /* SMC_PULSE */ +#define SMC1_CYCLE0_VAL 0x00080008 /* SMC_CYCLE */ +#define SMC1_CTRL0_VAL 0x31001000 /* SMC_MODE */ + +#define RSTC_RMR_VAL 0xA5000301 /* user reset enable */ + +#define AT91_WDTC_WDMR (0xFFFFFD44) /* (WDTC) Watchdog Mode Register */ +#define WDTC_WDMR_VAL 0x3fff8fff /* disable watchdog */ + +_TEXT_BASE: + .word TEXT_BASE + +.globl lowlevel_init +lowlevel_init: + + mov r5, pc /* r5 = POS1 + 4 current */ +POS1: + ldr r0, =POS1 /* r0 = POS1 compile */ + ldr r2, _TEXT_BASE + sub r0, r0, r2 /* r0 = POS1-_TEXT_BASE (POS1 relative) */ + sub r5, r5, r0 /* r0 = TEXT_BASE-1 */ + sub r5, r5, #4 /* r1 = text base - current */ + + /* memory control configuration 1 */ + ldr r0, =SMRDATA + ldr r2, =SMRDATA1 + ldr r1, _TEXT_BASE + sub r0, r0, r1 + sub r2, r2, r1 + add r0, r0, r5 + add r2, r2, r5 +0: + /* the address */ + ldr r1, [r0], #4 + /* the value */ + ldr r3, [r0], #4 + str r3, [r1] + cmp r2, r0 + bne 0b + +/*----------------------------------------------------------------------------- +;PMC Init Step 1. +;------------------------------------------------------------------------------ +;- Check if the PLL is already initialized +;----------------------------------------------------------------------------*/ + ldr r1, =(AT91_BASE_SYS + AT91_PMC_MCKR) + ldr r0, [r1] + and r0, r0, #3 + cmp r0, #0 + bne setup_PLLB + +/*;--------------------------------------------------------------------------- +;- Enable the Main Oscillator +;----------------------------------------------------------------------------*/ + ldr r1, =(AT91_BASE_SYS + AT91_CKGR_MOR) + ldr r2, =(AT91_BASE_SYS + AT91_PMC_SR) + ldr r0, =0x0000FF01 + str r0, [r1] /* Enable main oscillator, OSCOUNT = 0xFF */ + + /* Reading the PMC Status to detect when the Main Oscillator is enabled */ + mov r4, #AT91_PMC_MOSCS +MOSCS_Loop: + ldr r3, [r2] + and r3, r4, r3 + cmp r3, #AT91_PMC_MOSCS + bne MOSCS_Loop + +/*----------------------------------------------------------------------------- +;PMC Init Step 2. +;------------------------------------------------------------------------------ +;- Setup PLLA +;----------------------------------------------------------------------------*/ + ldr r1, =(AT91_BASE_SYS + AT91_CKGR_PLLAR) + ldr r0, =PLLAR_VAL + str r0, [r1] + + /* Reading the PMC Status register to detect when the PLLA is locked */ + mov r4, #AT91_PMC_LOCKA +MOSCS_Loop1: + ldr r3, [r2] + and r3, r4, r3 + cmp r3, #AT91_PMC_LOCKA + bne MOSCS_Loop1 + +/*----------------------------------------------------------------------------- +;PMC Init Step 3. +;------------------------------------------------------------------------------ +;- Switch on the Main Oscillator 18.432 MHz +;----------------------------------------------------------------------------*/ + ldr r1, =(AT91_BASE_SYS + AT91_PMC_MCKR) + + /* -Master Clock Controller register PMC_MCKR */ + ldr r0, =0x100 + str r0, [r1] + + /* Reading the PMC Status to detect when the Master clock is ready */ + mov r4, #AT91_PMC_MCKRDY +MCKRDY_Loop: + ldr r3, [r2] + and r3, r4, r3 + cmp r3, #AT91_PMC_MCKRDY + bne MCKRDY_Loop + + ldr r0, =0x102 + str r0, [r1] + + /* Reading the PMC Status to detect when the Master clock is ready */ + mov r4, #AT91_PMC_MCKRDY +MCKRDY_Loop1: + ldr r3, [r2] + and r3, r4, r3 + cmp r3, #AT91_PMC_MCKRDY + bne MCKRDY_Loop1 + +/*----------------------------------------------------------------------------- +;PMC Init Step 4. +;------------------------------------------------------------------------------ +;- Setup PLLB +;----------------------------------------------------------------------------*/ +setup_PLLB: + ldr r2, =(AT91_BASE_SYS + AT91_PMC_SR) + mov r4, #AT91_PMC_LOCKB + ldr r3, [r2] + and r3, r4, r3 + cmp r3, #AT91_PMC_LOCKB + beq PLL_setup_end + + ldr r1, =(AT91_BASE_SYS + AT91_CKGR_PLLBR) + ldr r0, =PLLBR_VAL + str r0, [r1] + + /* Reading the PMC Status register to detect when the PLLB is locked */ + mov r4, #AT91_PMC_LOCKB +MOSCS_Loop2: + ldr r3, [r2] + and r3, r4, r3 + cmp r3, #AT91_PMC_LOCKB + bne MOSCS_Loop2 + +PLL_setup_end: + + /* memory control configuration 2 */ + ldr r0, =AT91_SDRAMC0_TR + ldr r1, [r0] + cmp r1, #0 + bne SDRAM_setup_end + + ldr r0, =SMRDATA1 + ldr r2, =SMRDATA2 + ldr r1, _TEXT_BASE + sub r0, r0, r1 + sub r2, r2, r1 + add r0, r0, r5 + add r2, r2, r5 + +2: + /* the address */ + ldr r1, [r0], #4 + /* the value */ + ldr r3, [r0], #4 + str r3, [r1] + cmp r2, r0 + bne 2b + +SDRAM_setup_end: + /* everything is fine now */ + mov pc, lr + + .ltorg + +SMRDATA: + .word AT91_WDTC_WDMR + .word WDTC_WDMR_VAL + + .word AT91_PIOD_PDR + .word PIOD_PDR_VAL1 + .word AT91_PIOD_PPUDR + .word PIOD_PPUDR_VAL + .word AT91_PIOD_ASR + .word PIOD_PPUDR_VAL + + .word AT91_CCFG_EBI0CSA + .word MATRIX_EBI0CSA_VAL + .word AT91_CCFG_EBI1CSA + .word MATRIX_EBI1CSA_VAL + + /* flash */ + .word AT91_SMC0_CTRL0 + .word SMC0_CTRL0_VAL + + .word AT91_SMC0_CYCLE0 + .word SMC0_CYCLE0_VAL + + .word AT91_SMC0_PULSE0 + .word SMC0_PULSE0_VAL + + .word AT91_SMC0_SETUP0 + .word SMC0_SETUP0_VAL + + /* PSRAM */ + .word AT91_SMC1_CTRL0 + .word SMC1_CTRL0_VAL + + .word AT91_SMC1_CYCLE0 + .word SMC1_CYCLE0_VAL + + .word AT91_SMC1_PULSE0 + .word SMC1_PULSE0_VAL + + .word AT91_SMC1_SETUP0 + .word SMC1_SETUP0_VAL + +SMRDATA1: + .word AT91_SDRAMC0_MR + .word SDRC_MR_VAL1 + .word AT91_SDRAMC0_TR + .word SDRC_TR_VAL1 + .word AT91_SDRAMC0_CR + .word SDRC_CR_VAL + .word AT91_SDRAMC0_MDR + .word SDRC_MDR_VAL + .word AT91_SDRAMC0_MR + .word SDRC_MR_VAL2 + .word SDRAM + .word SDRAM_VAL1 + .word AT91_SDRAMC0_MR + .word SDRC_MR_VAL3 + .word SDRAM + .word SDRAM_VAL2 + .word SDRAM + .word SDRAM_VAL3 + .word SDRAM + .word SDRAM_VAL4 + .word SDRAM + .word SDRAM_VAL5 + .word SDRAM + .word SDRAM_VAL6 + .word SDRAM + .word SDRAM_VAL7 + .word SDRAM + .word SDRAM_VAL8 + .word SDRAM + .word SDRAM_VAL9 + .word AT91_SDRAMC0_MR + .word SDRC_MR_VAL4 + .word SDRAM + .word SDRAM_VAL10 + .word AT91_SDRAMC0_MR + .word SDRC_MR_VAL5 + .word SDRAM + .word SDRAM_VAL11 + .word AT91_SDRAMC0_TR + .word SDRC_TR_VAL2 + .word SDRAM + .word SDRAM_VAL12 + /* User reset enable*/ + .word AT91_RSTC_RMR + .word RSTC_RMR_VAL + /* MATRIX_MCFG - REMAP all masters */ +/* .word AT91_MATRIX_MRCR + .word 0x1FF +*/ + +SMRDATA2: + .word 0 + +#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ + diff --git a/board/ronetix/pm9263/partition.c b/board/ronetix/pm9263/partition.c new file mode 100644 index 0000000..e4e8a6b --- /dev/null +++ b/board/ronetix/pm9263/partition.c @@ -0,0 +1,47 @@ +/* + * (C) Copyright 2008 + * Ulf Samuelsson ulf@atmel.com + * Ilko Iliev <www.ronetix.at> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ +#include <common.h> +#include <config.h> +#include <asm/hardware.h> +#include <dataflash.h> + +AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS]; + +struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = { + {CFG_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */ +}; + +/*define the area offsets*/ +#if (CFG_MAX_DATAFLASH_PART == 1) +dataflash_protect_t area_list[NB_DATAFLASH_AREA] = { + {0x00000000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, ""}, +}; + +#else +dataflash_protect_t area_list[NB_DATAFLASH_AREA] = { + {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"}, + {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"}, + {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"}, + {0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0, "Kernel"}, + {0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"}, +}; +#endif diff --git a/board/ronetix/pm9263/pm9263.c b/board/ronetix/pm9263/pm9263.c new file mode 100644 index 0000000..0953110 --- /dev/null +++ b/board/ronetix/pm9263/pm9263.c @@ -0,0 +1,393 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop stelian.pop@leadtechdesign.com + * Lead Tech Design <www.leadtechdesign.com> + * Ilko Iliev <www.ronetix.at> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/sizes.h> +#include <asm/arch/at91sam9263.h> +#include <asm/arch/at91sam9263_matrix.h> +#include <asm/arch/at91sam9_smc.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_rstc.h> +#include <asm/arch/gpio.h> +#include <asm/arch/io.h> +#include <asm/arch/hardware.h> +#include <lcd.h> +#include <atmel_lcdc.h> +#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) +#include <net.h> +#endif +#include <netdev.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* ------------------------------------------------------------------------- */ +/* + * Miscelaneous platform dependent initialisations + */ + +static void pm9263_serial_hw_init(void) +{ +#ifdef CONFIG_USART0 + at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */ + at91_set_A_periph(AT91_PIN_PA27, 0); /* RXD0 */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0); +#endif + +#ifdef CONFIG_USART1 + at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */ + at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1); +#endif + +#ifdef CONFIG_USART2 + at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */ + at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2); +#endif + +#ifdef CONFIG_USART3 /* DBGU */ + at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */ + at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS); +#endif +} + +#ifdef CONFIG_CMD_NAND +static void pm9263_nand_hw_init(void) +{ + unsigned long csa; + + /* Enable CS3 */ + csa = at91_sys_read(AT91_MATRIX_EBI0CSA); + at91_sys_write(AT91_MATRIX_EBI0CSA, + csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA); + + /* Configure SMC CS3 for NAND/SmartMedia */ + at91_sys_write(AT91_SMC_SETUP(3), + AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) | + AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0)); + at91_sys_write(AT91_SMC_PULSE(3), + AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) | + AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3)); + at91_sys_write(AT91_SMC_CYCLE(3), + AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5)); + at91_sys_write(AT91_SMC_MODE(3), + AT91_SMC_READMODE | AT91_SMC_WRITEMODE | + AT91_SMC_EXNWMODE_DISABLE | +#ifdef CFG_NAND_DBW_16 + AT91_SMC_DBW_16 | +#else /* CFG_NAND_DBW_8 */ + AT91_SMC_DBW_8 | +#endif + AT91_SMC_TDF_(2)); + + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_PIOA | + 1 << AT91SAM9263_ID_PIOCDE); + + /* Configure RDY/BSY */ + at91_set_gpio_input(AT91_PIN_PB30, 1); + + /* Enable NandFlash */ + at91_set_gpio_output(AT91_PIN_PD15, 1); +} +#endif + +#ifdef CONFIG_HAS_DATAFLASH +static void pm9263_spi_hw_init(void) +{ + at91_set_B_periph(AT91_PIN_PA5, 0); /* SPI0_NPCS0 */ + + at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ + at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ + at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ + + /* Enable clock */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_SPI0); +} +#endif + +#ifdef CONFIG_MACB +static void pm9263_macb_hw_init(void) +{ + /* Enable clock */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_EMAC); + + /* + * Disable pull-up on: + * RXDV (PC25) => PHY normal mode (not Test mode) + * ERX0 (PE25) => PHY ADDR0 + * ERX1 (PE26) => PHY ADDR1 => PHYADDR = 0x0 + * + * PHY has internal pull-down + */ + writel(pin_to_mask(AT91_PIN_PC25), + pin_to_controller(AT91_PIN_PC0) + PIO_PUDR); + writel(pin_to_mask(AT91_PIN_PE25) | + pin_to_mask(AT91_PIN_PE26), + pin_to_controller(AT91_PIN_PE0) + PIO_PUDR); + + + /* Re-enable pull-up */ + writel(pin_to_mask(AT91_PIN_PC25), + pin_to_controller(AT91_PIN_PC0) + PIO_PUER); + writel(pin_to_mask(AT91_PIN_PE25) | + pin_to_mask(AT91_PIN_PE26), + pin_to_controller(AT91_PIN_PE0) + PIO_PUER); + + at91_set_A_periph(AT91_PIN_PE21, 0); /* ETXCK_EREFCK */ + at91_set_B_periph(AT91_PIN_PC25, 0); /* ERXDV */ + at91_set_A_periph(AT91_PIN_PE25, 0); /* ERX0 */ + at91_set_A_periph(AT91_PIN_PE26, 0); /* ERX1 */ + at91_set_A_periph(AT91_PIN_PE27, 0); /* ERXER */ + at91_set_A_periph(AT91_PIN_PE28, 0); /* ETXEN */ + at91_set_A_periph(AT91_PIN_PE23, 0); /* ETX0 */ + at91_set_A_periph(AT91_PIN_PE24, 0); /* ETX1 */ + at91_set_A_periph(AT91_PIN_PE30, 0); /* EMDIO */ + at91_set_A_periph(AT91_PIN_PE29, 0); /* EMDC */ + +#ifndef CONFIG_RMII + at91_set_A_periph(AT91_PIN_PE22, 0); /* ECRS */ + at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */ + at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */ + at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */ + at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */ + at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */ + at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */ + at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */ +#endif + +} +#endif + +#ifdef CONFIG_USB_OHCI_NEW +static void pm9263_uhp_hw_init(void) +{ + /* Enable VBus on UHP ports */ + at91_set_gpio_output(AT91_PIN_PA21, 0); + at91_set_gpio_output(AT91_PIN_PA24, 0); +} +#endif + +#ifdef CONFIG_LCD +vidinfo_t panel_info = { + vl_col: 240, + vl_row: 320, + vl_clk: 4965000, + vl_sync: ATMEL_LCDC_INVLINE_INVERTED | + ATMEL_LCDC_INVFRAME_INVERTED, + vl_bpix: 3, + vl_tft: 1, + vl_hsync_len: 5, + vl_left_margin: 1, + vl_right_margin:33, + vl_vsync_len: 1, + vl_upper_margin:1, + vl_lower_margin:0, + mmio: AT91SAM9263_LCDC_BASE, +}; + +void lcd_enable(void) +{ + at91_set_gpio_value(AT91_PIN_PA22, 1); /* power up */ +} + +void lcd_disable(void) +{ + at91_set_gpio_value(AT91_PIN_PA22, 0); /* power down */ +} + +#ifdef LCD_IN_PSRAM + +#define PSRAM_CRE_PIN AT91_PIN_PB29 +#define PSRAM_CTRL_REG (PHYS_PSRAM + PHYS_PSRAM_SIZE - 2) + +/* Initialize the PSRAM memory */ +static int pm9263_lcd_hw_psram_init(void) +{ +volatile uint16_t *p; +volatile uint16_t x; + + /* setup PB29 as output */ + at91_set_gpio_output(PSRAM_CRE_PIN, 1); + + at91_set_gpio_value(PSRAM_CRE_PIN, 0); /* set PSRAM_CRE_PIN to '0' */ + + p = (volatile uint16_t *) PSRAM_CTRL_REG; + + /* PSRAM: write BCR */ + x = *p; /* mem r16 0x703ffffe 1 */ + x = *p; /* mem r16 0x703ffffe 1 */ + *p = 1; /* mem w16 0x703ffffe 1 ; 0 for RCR, 1 for BCR */ + *p = 0x9d4f; /* write the BCR */ + + /* write RCR of the PSRAM */ + p = (volatile uint16_t *) PSRAM_CTRL_REG; + x = *p; /* mem r16 0x703ffffe 1 */ + x = *p; /* mem r16 0x703ffffe 1 */ + *p = 0; /* mem w16 0x703ffffe 0 ; 0 for RCR, 1 for BCR */ + + *p = 0x90; /* set RCR; 0x10 - async mode, 0x90 - page mode */ + + /* test to see if the PSRAM is MT45W2M16A or MT45W2M16B + MT45W2M16B - CRE must be 0 + MT45W2M16A - CRE must be 1 + */ + p = (volatile uint16_t *) PHYS_PSRAM; + p[0] = 0x1234; + p[1] = 0x5678; + + /* test if the chip is MT45W2M16B */ + if ( (p[0] != 0x1234) || (p[1] != 0x5678) ) + { + /* try with CRE=1 (MT45W2M16A) */ + at91_set_gpio_value(PSRAM_CRE_PIN, 1); /* set PSRAM_CRE_PIN to '1' */ + + /* write RCR of the PSRAM */ + p = (volatile uint16_t *) PSRAM_CTRL_REG; + x = *p; /* mem r16 0x703ffffe 1 */ + x = *p; /* mem r16 0x703ffffe 1 */ + *p = 0; /* mem w16 0x703ffffe 0 ; 0 for RCR, 1 for BCR */ + + *p = 0x90; /* set RCR; 0x10 - async mode, 0x90 - page mode */ + + p = (volatile uint16_t *) PHYS_PSRAM; + p[0] = 0x1234; + p[1] = 0x5678; + if ( (p[0] != 0x1234) || (p[1] != 0x5678) ) + return 1; + + } + return 0; +} +#endif + + +static void pm9263_lcd_hw_init(void) +{ + at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */ + at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */ + at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */ + at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */ + at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */ + at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */ + at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */ + at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */ + at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */ + at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */ + at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */ + at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */ + at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */ + at91_set_B_periph(AT91_PIN_PC12, 0); /* LCDD13 */ + at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */ + at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */ + at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */ + at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */ + at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */ + at91_set_B_periph(AT91_PIN_PC17, 0); /* LCDD21 */ + at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */ + at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */ + + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_LCDC); + + /* Power Control */ + at91_set_gpio_output(AT91_PIN_PA22, 1); + at91_set_gpio_value(AT91_PIN_PA22, 0); /* power down */ + +#ifdef LCD_IN_PSRAM + /* initialize te PSRAM */ + int stat = pm9263_lcd_hw_psram_init(); + + gd->fb_base = (stat == 0) ? PHYS_PSRAM : AT91SAM9263_SRAM0_BASE; +#else + gd->fb_base = AT91SAM9263_SRAM0_BASE; +#endif + +} +#endif + +int board_init(void) +{ + /* Enable Ctrlc */ + console_init_f(); + + /* PB27 enables the 50MHz oscillator for Ethernet PHY + 1 - enable + 0 - disable */ + at91_set_gpio_output(AT91_PIN_PB27, 1); + at91_set_gpio_value(AT91_PIN_PB27, 1); /* 1- enable, 0 - disable */ + + /* arch number of AT91SAM9263EK-Board */ + gd->bd->bi_arch_number = MACH_TYPE_PM9263; + + /* adress of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + + pm9263_serial_hw_init(); +#ifdef CONFIG_CMD_NAND + pm9263_nand_hw_init(); +#endif +#ifdef CONFIG_HAS_DATAFLASH + pm9263_spi_hw_init(); +#endif +#ifdef CONFIG_MACB + pm9263_macb_hw_init(); +#endif +#ifdef CONFIG_USB_OHCI_NEW + pm9263_uhp_hw_init(); +#endif +#ifdef CONFIG_LCD + pm9263_lcd_hw_init(); +#endif + return 0; +} + +int dram_init(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM; + gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; + return 0; +} + +#ifdef CONFIG_RESET_PHY_R +void reset_phy(void) +{ +#ifdef CONFIG_MACB + /* + * Initialize ethernet HW addr prior to starting Linux, + * needed for nfsroot + */ + eth_init(gd->bd); +#endif +} +#endif + +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_MACB + rc = macb_eth_initialize(0, (void *)AT91_BASE_EMAC, 0x01); +#endif + return rc; +} diff --git a/board/ronetix/pm9263/pm9263_nand.c b/board/ronetix/pm9263/pm9263_nand.c new file mode 100644 index 0000000..03f5ac2 --- /dev/null +++ b/board/ronetix/pm9263/pm9263_nand.c @@ -0,0 +1,79 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop stelian.pop@leadtechdesign.com + * Lead Tech Design <www.leadtechdesign.com> + * Ilko Iliev <www.ronetix.at> + * + * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/at91sam9263.h> +#include <asm/arch/gpio.h> +#include <asm/arch/at91_pio.h> + +#include <nand.h> + +/* + * hardware specific access to control-lines + */ +#define MASK_ALE (1 << 21) /* our ALE is AD21 */ +#define MASK_CLE (1 << 22) /* our CLE is AD22 */ + +static void pm9263_nand_hwcontrol(struct mtd_info *mtd, + int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + + if (ctrl & NAND_CTRL_CHANGE) { + ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; + IO_ADDR_W &= ~(MASK_ALE | MASK_CLE); + + if (ctrl & NAND_CLE) + IO_ADDR_W |= MASK_CLE; + if (ctrl & NAND_ALE) + IO_ADDR_W |= MASK_ALE; + + at91_set_gpio_value(AT91_PIN_PD15, !(ctrl & NAND_NCE)); + this->IO_ADDR_W = (void *) IO_ADDR_W; + } + + if (cmd != NAND_CMD_NONE) + writeb(cmd, this->IO_ADDR_W); +} + +static int pm9263_nand_ready(struct mtd_info *mtd) +{ + return at91_get_gpio_value(AT91_PIN_PB30); +} + +int board_nand_init(struct nand_chip *nand) +{ + nand->ecc.mode = NAND_ECC_SOFT; +#ifdef CFG_NAND_DBW_16 + nand->options = NAND_BUSWIDTH_16; +#endif + nand->cmd_ctrl = pm9263_nand_hwcontrol; + nand->dev_ready = pm9263_nand_ready; + nand->chip_delay = 20; + + return 0; +} diff --git a/common/lcd.c b/common/lcd.c index 25f8664..9f81031 100644 --- a/common/lcd.c +++ b/common/lcd.c @@ -824,14 +824,23 @@ static void *lcd_logo (void)
#ifdef CONFIG_ATMEL_LCD # ifdef CONFIG_LCD_INFO + sprintf (info, "%s", U_BOOT_VERSION); lcd_drawchars (LCD_INFO_X, LCD_INFO_Y, (uchar *)info, strlen(info));
+#ifdef CONFIG_LCD_LOGO_TEXT1 + sprintf (info, CONFIG_LCD_LOGO_TEXT1); +#else sprintf (info, "(C) 2008 ATMEL Corp"); +#endif lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT, (uchar *)info, strlen(info));
+#ifdef CONFIG_LCD_LOGO_TEXT2 + sprintf (info, CONFIG_LCD_LOGO_TEXT2); +#else sprintf (info, "at91support@atmel.com"); +#endif lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 2, (uchar *)info, strlen(info));
diff --git a/cpu/arm926ejs/at91/lowlevel_init.S b/cpu/arm926ejs/at91/lowlevel_init.S index ec6ad5d..7882e89 100644 --- a/cpu/arm926ejs/at91/lowlevel_init.S +++ b/cpu/arm926ejs/at91/lowlevel_init.S @@ -27,7 +27,7 @@ #include <config.h> #include <version.h>
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT +#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && !defined(CONFIG_USER_LOWLEVEL_INIT)
.globl lowlevel_init lowlevel_init: @@ -39,5 +39,5 @@ lowlevel_init: mov pc, lr
.ltorg - -#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ + +#endif /* !CONFIG_SKIP_LOWLEVEL_INIT && !CONFIG_USER_LOWLEVEL_INIT */ diff --git a/drivers/mtd/dataflash.c b/drivers/mtd/dataflash.c index 049da69..e926b38 100644 --- a/drivers/mtd/dataflash.c +++ b/drivers/mtd/dataflash.c @@ -130,8 +130,9 @@ int AT91F_DataflashInit (void) dfcode = 0; break; } + /* set the last area end to the dataflash size*/ - area_list[NB_DATAFLASH_AREA -1].end = + dataflash_info[i].end_address = (dataflash_info[i].Device.pages_number * dataflash_info[i].Device.pages_size)-1;
@@ -146,7 +147,7 @@ int AT91F_DataflashInit (void) if(area_list[part].end == 0xffffffff) { dataflash_info[i].Device.area_list[j].end = dataflash_info[i].end_address + - dataflash_info [i].logical_address; + dataflash_info[i].logical_address; last_part = 1; } else { dataflash_info[i].Device.area_list[j].end = diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h new file mode 100644 index 0000000..1646e9f --- /dev/null +++ b/include/configs/pm9263.h @@ -0,0 +1,285 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop stelian.pop@leadtechdesign.com + * Lead Tech Design <www.leadtechdesign.com> + * Ilko Iliev <www.ronetix.at> + * + * Configuation settings for the RONETIX PM9263 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* ARM asynchronous clock */ +#define AT91_CPU_NAME "AT91SAM9263" + +#define PM9263_CRYSTAL 18432000 +#define MASTER_PLL_DIV 15 +#define MASTER_PLL_MUL 162 +#define MAIN_PLL_DIV 2 + +#define AT91_MAIN_CLOCK (PM9263_CRYSTAL / MASTER_PLL_DIV * MASTER_PLL_MUL) +#define AT91_MASTER_CLOCK (AT91_MAIN_CLOCK / MAIN_PLL_DIV) + +#define CFG_HZ 1000000 /* 1us resolution */ + +#define AT91_SLOW_CLOCK 32768 /* slow clock */ + +#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ +#define CONFIG_AT91SAM9263 1 /* It's an Atmel AT91SAM9263 SoC*/ +#define CONFIG_PM9263 1 /* on a Ronetix PM9263 Board */ +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +#undef CONFIG_SKIP_LOWLEVEL_INIT +#undef CONFIG_SKIP_RELOCATE_UBOOT +#define CONFIG_USER_LOWLEVEL_INIT 1 + +/* + * Hardware drivers + */ +#define CONFIG_ATMEL_USART 1 +#undef CONFIG_USART0 +#undef CONFIG_USART1 +#undef CONFIG_USART2 +#define CONFIG_USART3 1 /* USART 3 is DBGU */ + +/* LCD */ +#define CONFIG_LCD 1 +#define LCD_BPP LCD_COLOR8 +#define CONFIG_LCD_LOGO 1 +#define CONFIG_LCD_LOGO_TEXT1 "(C) 2008 Ronetix GmbH" +#define CONFIG_LCD_LOGO_TEXT2 "support@ronetix.at" +#undef LCD_TEST_PATTERN +#define CONFIG_LCD_INFO 1 +#define CONFIG_LCD_INFO_BELOW_LOGO 1 +#define CFG_WHITE_ON_BLACK 1 +#define CONFIG_ATMEL_LCD 1 +#define CONFIG_ATMEL_LCD_BGR555 1 +#define CFG_CONSOLE_IS_IN_ENV 1 + +#define LCD_IN_PSRAM 1 + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_IDENT_STRING "\r\n""Ronetix PM9263 Board" + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE 1 +#define CONFIG_BOOTP_BOOTPATH 1 +#define CONFIG_BOOTP_GATEWAY 1 +#define CONFIG_BOOTP_HOSTNAME 1 + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_IMI +#undef CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_IMLS + +#define CONFIG_CMD_PING 1 +#define CONFIG_CMD_DHCP 1 +#define CONFIG_CMD_NAND 1 +#define CONFIG_CMD_USB 1 + +/* SDRAM */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM 0x20000000 +#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ + +/* DataFlash */ +#define CONFIG_HAS_DATAFLASH 1 +#define CFG_SPI_WRITE_TOUT (5*CFG_HZ) +#define CFG_MAX_DATAFLASH_PART 1 +#define CFG_MAX_DATAFLASH_BANKS 1 +#define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ +#define AT91_SPI_CLK 15000000 +#define DATAFLASH_TCSS (0x1a << 16) +#define DATAFLASH_TCHS (0x1 << 24) + +/* NOR flash, if populated */ +#if 0 +#define CFG_NO_FLASH 1 +#else +#define CFG_FLASH_CFI 1 +#define CONFIG_FLASH_CFI_DRIVER 1 +#define PHYS_FLASH_1 0x10000000 +#define CFG_FLASH_BASE PHYS_FLASH_1 +#define CFG_MAX_FLASH_SECT 256 +#define CFG_MAX_FLASH_BANKS 1 +#endif + +/* NAND flash */ +#define NAND_MAX_CHIPS 1 +#define CFG_MAX_NAND_DEVICE 1 +#define CFG_NAND_BASE 0x40000000 +#define CFG_NAND_DBW_8 1 + +/* PSRAM */ +#define PHYS_PSRAM 0x70000000 +#define PHYS_PSRAM_SIZE 0x00400000 /* 4MB */ + +/* Ethernet */ +#define CONFIG_MACB 1 +#define CONFIG_RMII 1 +#define CONFIG_NET_MULTI 1 +#define CONFIG_NET_RETRY_COUNT 20 +#define CONFIG_RESET_PHY_R 1 + +/* USB */ +#define CONFIG_USB_OHCI_NEW 1 +#define LITTLEENDIAN 1 +#define CONFIG_DOS_PARTITION 1 +#define CFG_USB_OHCI_CPU_INIT 1 +#define CFG_USB_OHCI_REGS_BASE 0x00a00000 /* AT91SAM9263_UHP_BASE */ +#define CFG_USB_OHCI_SLOT_NAME "at91sam9263" +#define CFG_USB_OHCI_MAX_ROOT_PORTS 2 +#define CONFIG_USB_STORAGE 1 + +#define CFG_LOAD_ADDR 0x22000000 /* load address */ + +#define CFG_MEMTEST_START PHYS_SDRAM +#define CFG_MEMTEST_END 0x23e00000 + +#define CFG_USE_FLASH 1 +#undef CFG_USE_DATAFLASH +#undef CFG_USE_NANDFLASH + +#ifdef CFG_USE_DATAFLASH + +/* bootstrap + u-boot + env + linux in dataflash on CS0 */ +#define CONFIG_ENV_IS_IN_DATAFLASH 1 +#define CFG_MONITOR_BASE (CFG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400) +#define CONFIG_ENV_OFFSET 0x4200 +#define CONFIG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET) +#define CONFIG_ENV_SIZE 0x4200 +#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm" +#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ + "root=/dev/mtdblock0 " \ + "mtdparts=at91_nand:-(root) "\ + "rw rootfstype=jffs2" + +#elif defined(CFG_USE_NANDFLASH) /* CFG_USE_NANDFLASH */ + +/* bootstrap + u-boot + env + linux in nandflash */ +#define CONFIG_ENV_IS_IN_NAND 1 +#define CONFIG_ENV_OFFSET 0x60000 +#define CONFIG_ENV_OFFSET_REDUND 0x80000 +#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ +#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm" +#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ + "root=/dev/mtdblock5 " \ + "mtdparts=at91_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,2M(linux),-(root) " \ + "rw rootfstype=jffs2" + +#elif defined(CFG_USE_FLASH) /* CFG_USE_FLASH */ + +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_OFFSET 0x40000 +#define CONFIG_ENV_SECT_SIZE 0x10000 +#define CONFIG_ENV_SIZE 0x10000 +#define CONFIG_ENV_OVERWRITE 1 + +/* JFFS Partition offset set */ +#define CFG_JFFS2_FIRST_BANK 0 +#define CFG_JFFS2_NUM_BANKS 1 + +/* 512k reserved for u-boot */ +#define CFG_JFFS2_FIRST_SECTOR 11 + + +#define CONFIG_BOOTCOMMAND "run flashboot" +#define CONFIG_ROOTPATH /ronetix/rootfs +#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n" + +#define CONFIG_CON_ROT "fbcon=rotate:3 " +#define CONFIG_BOOTARGS "root=/dev/mtdblock4 rootfstype=jffs2 " CONFIG_CON_ROT + +#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=nand" +#define MTDPARTS_DEFAULT \ + "mtdparts=physmap-flash.0:" \ + "256k(u-boot)ro," \ + "64k(u-boot-env)ro," \ + "1408k(kernel)," \ + "-(rootfs);" \ + "nand:-(nand)" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "mtdids=" MTDIDS_DEFAULT "\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "partition=nand0,0\0" \ + "ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + CONFIG_CON_ROT \ + "nfsroot=$(serverip):$(rootpath) $(mtdparts)\0" \ + "addip=setenv bootargs $(bootargs) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"\ + ":$(hostname):eth0:off\0" \ + "ramboot=tftpboot 0x22000000 vmImage;" \ + "run ramargs;run addip;bootm 22000000\0" \ + "nfsboot=tftpboot 0x22000000 vmImage;" \ + "run nfsargs;run addip;bootm 22000000\0" \ + "flashboot=run ramargs;run addip;bootm 0x10050000\0" \ + "" + +#else +#error "Undefined memory device" +#endif + +#define CONFIG_IPADDR 192.168.3.222 +#define CONFIG_GATEWAYIP 192.168.3.1 +#define CONFIG_ETHADDR 02:DE:AD:BE:EF:01 +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_SERVERIP 192.168.3.1 +#define CONFIG_HOSTNAME PM9263 + +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } + +#define CFG_PROMPT "u-boot-pm9263> " +#define CFG_CBSIZE 256 +#define CFG_MAXARGS 16 +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) +#define CFG_LONGHELP 1 +#define CONFIG_CMDLINE_EDITING 1 + +#define ROUND(A, B) (((A) + (B)) & ~((B) - 1)) +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) +#define CFG_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ + +#define CONFIG_STACKSIZE (32*1024) /* regular stack */ + +#ifdef CONFIG_USE_IRQ +#error CONFIG_USE_IRQ not supported +#endif + +#endif diff --git a/tools/Makefile b/tools/Makefile index 9e9ee15..fbc64ba 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -47,6 +47,9 @@ endif ifeq ($(VENDOR),atmel) LOGO_BMP= logos/atmel.bmp endif +ifeq ($(VENDOR),ronetix) +LOGO_BMP= logos/ronetix.bmp +endif
#------------------------------------------------------------------------- diff --git a/tools/logos/ronetix.bmp b/tools/logos/ronetix.bmp new file mode 100644 index 0000000000000000000000000000000000000000..f956813915c7822ba11a3ab81ad9f48fa2849a5c GIT binary patch literal 5638 zc%03cKU~{J6vq!FPL^XEQ4<1A027nM#06YR5|^g@OKA-xvFpaEo7M?2RUxKo5Z8f` zk&)3OBO@bYMn*=D9z8NL_UZmevTPuqe43=c5AXA&)4g|Jo$j7w=AYmmM1|WCii6(= zi-NTwAG^>E=VQ$NLCl!oy3YrH8uDqD^&-u(Udy7W*Rp67MXAM6G#*FscoM~vNt8^c zP%@Q5DQdGQH9L!Dsio0uI*roQvXJKlrL$R-rB;A^Cty{SEfgSU6&1i23M-Hsj#pOD z3RpZ@1;36~*4JT-Dq07hqJ9&`0l&G4Ho<1oRq)#|4)|^G*(%xwzrDSKws&@5j2hYj zU!Z;$?d<NNU21!ftA=*>_Rt>K`eqIC)Zn;+_9_*Kub~R~N@X8a_V>{~wF8K&qy2*e zbU^J89ULB_L$FGv4*m!o9a;7cuGP`eJMf2f^bY)?<&TfiG1$@3Dfkm;2Y+&cPN-F( z?G#n3RXDbM4OMGk)l*ahU#r)_pP{<t>y`&QJw>O~&d}M}8G1<m-%=+&H^IdU$jQ%* zaG`>V<efpIqzjeIa%O(6QS(bh==6GeZf-j3idvp#m#6c@n4f8gn3*fnE{j$(4Jy+f zGYdNJIbCuCJj-w`l}J!k<?#l*)vy|1x`LBSAuM@?)lrkA+a#&&h7&a-uA)(*E1rn9 zJ_EX#p?2%|Ivf^d+OFtRh;;}XPO2p4YVTjO_!<HAFJy&FioXhCwONX^OqSsSj@eOp zMd26a38DuSPlPmL@rA8q_@>3@w|XdnHF8s8Q8t1ZmlZxr!X%VWm0>~zUbifg$_cU{ zwZMZbF%MrUWZ#Fwr-*sL3YPA-<kQJU4~xWUmZ==&<12WYu0M8vQ+%NHu#G2;5;Dp7 z6h|!C)kZ$EmqsaCz{Tg++zMq|^T8nn!~wbl*LwJjV0Do=eDZBRdp$NDhC3z`Y}^Mq zp`SD>F%CEKjk0c`q|f2QVZ(H3bMqWNl2LqCbjLMVf<-YsIG7`Dz7cw|A?Q^_w(vL~ z&N<7IJ`NAxB1<YwOiM1lZsO57eB?eGR7#OzC&!buB5CF;_lnu$4`1+QoH4F8^X2Ja zaLf9*{2_cMUvmD*PQHqzK3xR4_>AlJ?BN;m-h5?^WtGz;id#S5i}}bJ=j!0wUXD4{ z#^Ez=ICy+By$_#xgWWyscG8dC`=gU9q^(}eM_%|{WlZUqw5y4W&+Hd?SP^*d!<XU( ztQ+q6I&P>hTv#n#!bcWdczkI!@{O7?vG#nLvmGwyTf{!L_+Ak&pFN`gQa&;#BC!84 zA;10M;lqh>F?;@N^Urd*=d0%Bd>yw)QRP!b@9Bg2@|`>a2lHg>`^eC*V!!}Pq517} z0qem)bsaS><C7CcnD346h?~zEUD5K-neqj*iBE0dTN3L}>MoJLzl{tI+z~U#H=p-~ z3Co~8aVcMFhL<j02sz)DRcGKG<B^L`4`3JH9OlDIeP#0ItH{vMP-N^c7W9JlgnI0V zcUIKmCG}aJy2jp3;c^2X>@~RsAEA6Qy_Y3x*)l#eDe&YGgRFdM;Q`<`TP!GRT~)dg zwr*>pds@8TZaxsYA9B6l)L4M6FH!6TA6e6|qCL$tYMCxF+>^;X*6B-w@)@`64}wWT zUJf$6p~1+HJn1}U#mkn?0i}6SJY3&^?7WZi`Pt&d%f!n^itt#lS7M7|874d~Q$D>< zym6HUi2L)-z>om^nP(l9#QT>kiUnWB{#<B~G|A?VojBj$4j;+jrX}r85F<u6Rsu#z z6L@~M$XA91;K0yJzHX!Pd3<K99V=d8DO4hh5<ipsoNC_(pSBYJJu@da1-b+u1Mtll zTo7+ux$`;C@yo!V0KEH#HI=*C&fz1*!(J`asLt*L)U##&Bf#IKy8`{ep!$HHjHp-6 zmtV<{9F#GE7hbiKJc$Uv$k%UKQ^|kJ&DZbnS<~Aj+FE8>bNz52M!CGPA*RzTU8L7= zTWL`$q-fcdWtMLd0DQ!op2l6*^-jgj_YpPD%7Yv?-K}r$MeIHDgtz5laiN%~FCU-J zs*_MxraaAW?%JF9j%Z7?iSjJI!c=+jWAj;clGT+)*_+tmGvnT$YKmHF3jEJiRQ<UY z&0-S|-nE;Io`zZnRpgWWXC|9(*~~Ywi;w7C?uvTl>JMhi$WNq4bdL;-xtjDBj(*oa QD;*(Q_XdWChX=;~1zg+&lK=n!
literal 0 Hc$@<O00001
-- 1.5.2.2