On Thu, Oct 27, 2022 at 04:18:43PM +0530, Sinthu Raja wrote:
From: Sinthu Raja sinthu.raja@ti.com
AM68 Starter Kit (SK) is a low cost, small form factor board designed for TI’s AM68 SoC. TI’s AM68 SoC comprises of dual core A72, high performance vision accelerators, hardware accelerators, latest C71x DSP, high bandwidth real-time IPs for capture and display. The SoC is power optimized to provide best in class performance for industrial applications.
AM68 SK supports the following interfaces: * 16 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.1 Type-C port * x2 USB 3.1 Type-A ports * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO headerSK's System on Module (SoM) contains the SoC, PMIC, DDR and OSPI flash. Therefore, add support for the components present on the SoM.
Schematics: https://www.ti.com/lit/zip/SPRR463 TRM: http://www.ti.com/lit/pdf/spruj28
Signed-off-by: Sinthu Raja sinthu.raja@ti.com
arch/arm/dts/k3-am68-sk-som.dtsi | 167 +++++++++++++++++++++++++++++++
What is the status of this dtsi file (and the ones in subsequent patches) with upstream Linux? Please mention the tag they're synced from in the commit message to make future updates easier.