[U-Boot-Users] PPC 405 walnut

My board is close to PPC405 Walnut board. But there is slight modification in the FLASH chip and SDRAM.

-> FLASH chip on my custom board is AT49BV320C (flash interface 16Bits). How do I add this ATMEL chip driver to the u-boot. -> SDRAM controller not read from EEPROM , i want to hardcode the values of the SDRAM using the sdram_init (i.e sdram.c) function instead of the spd_sdram.c file. Do i need to change the function implimentation init_func_ram() in the board.c file.

plz throw the light to resolve.....

Regards, Entry.

--------------------------------- Unlimited freedom, unlimited storage. Get it now