The RD-AC5X-32G16HVG6HLG-A0 development board main components and features include: * Main 12V/54V power supply * 270 Gbps throughput packet processor on the main board * DDR4: * SR1: 2GB DDR4 2400MT/S(1GB x 2 pcs ) with ECC(1GB x 1 pcs) * SR2: 4GB DDR4 2400MT/S(2GB x 2 pcs ) with ECC(2GB x 1 pcs) * PCB co-layout with 4GB device to support 8GB (Dual CS) requirement * 16GB eMMC (Samsung KLMAG1JETD-B041006) * 16MB SPI NOR(GD25Q127C) * 32 x 1000 Base-T interfaces * 16 x 2500 Base-T interfaces * SR1: 88E2540*4 * SR2: 88E2580*1+88E2540*2 * Six (6) x 25G Base-R SFP28 interfaces * One (1) x RJ-45 console connector, interfacing to the on board UART * One (1) x USB Type-A connector, interfacing to the USB 2.0 port (0) * One (1) x USB Type-mini B connector, interfacing to the USB 2.0 port (1) * One (1) x RJ-45 1G Base-T Management port, interfacing to the host port (shared with PCIe) Connected to 88E1512 Gigabit Ethernet Phy * One (1) x Oculink port, interfacing to the PCIe port for external CPU connection * POE 802.3AT support on Port 1 ~ Port 32, 802.3BT support on Port 33 ~ Port 48 (Microsemi PD69208T4, PD69208M or TI TPS2388,TPS23881 solution) * POE total power budget 780W * LED interfaces per network port/POE * LED interfaces (common) showing system status * PTP TC mode Supported (Reserved M.2 connector to support BC mode)
Signed-off-by: Chris Packham judge.packham@gmail.com ---
Changes in v6: - Set CONFIG_DEFAULT_DEVICE_TREE and CONFIG_TEXT_BASE
Changes in v5: - Remove unused bpard_{early,late}_init{,_r,_f} functions - Remove CPNFIG_PCI and CONFIG_E1000 as the PCI interface is not currently working (requires more vendor code) - Use CONFIG_OF_SEPARATE instead of CONFIG_OF_EMBED
Changes in v4: - Move CONFIG_DISPLAY_BOARDINFO_LATE and CONFIG_ENV_OVERWRITE to the defconfig. - Remove CONFIG_BAUDRATE as this is already set in the default config - Remove CONFIG_USB_MAX_CONTROLLER_COUNT as this is not needed with DM_USB - Remove CONFIG_PREBOOT as we don't have anything to run - Remove commented out CONFIG_BOARD_EARLY_INIT_R - Remove DEBUG_UART configuration - Remove unnecessary console environment variable - Remove CONFIG_MVEBU_SAR
Changes in v3: - Remove MMC and UBIFS distroboot options (MMC driver is not currently functional, NAND is not populated on the RD-AC5X board) - Remove unnecessary Ethernet configuration - Remove unnecessary NAND configuration - Remove memory node from dts so the value passed by the DDR FW will be used
Changes in v2: - Use distro boot by default - remove unnecessary SPI-NOR partitions
arch/arm/dts/Makefile | 3 +- arch/arm/dts/ac5-98dx35xx-rd.dts | 129 +++++++++++++++++++++ arch/arm/mach-mvebu/Kconfig | 9 +- board/Marvell/mvebu_alleycat-5/MAINTAINERS | 6 + board/Marvell/mvebu_alleycat-5/Makefile | 3 + board/Marvell/mvebu_alleycat-5/board.c | 13 +++ configs/mvebu_ac5_rd_defconfig | 81 +++++++++++++ include/configs/mvebu_alleycat-5.h | 42 +++++++ 8 files changed, 284 insertions(+), 2 deletions(-) create mode 100644 arch/arm/dts/ac5-98dx35xx-rd.dts create mode 100644 board/Marvell/mvebu_alleycat-5/MAINTAINERS create mode 100644 board/Marvell/mvebu_alleycat-5/Makefile create mode 100644 board/Marvell/mvebu_alleycat-5/board.c create mode 100644 configs/mvebu_ac5_rd_defconfig create mode 100644 include/configs/mvebu_alleycat-5.h
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 791838733c..b52077cddc 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -278,7 +278,8 @@ dtb-$(CONFIG_ARCH_MVEBU) += \ cn9132-db-A.dtb \ cn9132-db-B.dtb \ cn9130-crb-A.dtb \ - cn9130-crb-B.dtb + cn9130-crb-B.dtb \ + ac5-98dx35xx-rd.dtb endif
dtb-$(CONFIG_ARCH_SYNQUACER) += synquacer-sc2a11-developerbox.dtb diff --git a/arch/arm/dts/ac5-98dx35xx-rd.dts b/arch/arm/dts/ac5-98dx35xx-rd.dts new file mode 100644 index 0000000000..d9f217cd4a --- /dev/null +++ b/arch/arm/dts/ac5-98dx35xx-rd.dts @@ -0,0 +1,129 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree For RD-AC5X. + * + * Copyright (C) 2021 Marvell + * Copyright (C) 2022 Allied Telesis Labs + */ +/* + * Device Tree file for Marvell Alleycat 5X development board + * This board file supports the B configuration of the board + */ + +/dts-v1/; + +#include "ac5-98dx35xx.dtsi" + +/ { + model = "Marvell RD-AC5X Board"; + compatible = "marvell,rd-ac5x", "marvell,ac5x", "marvell,ac5"; + + aliases { + serial0 = &uart0; + spiflash0 = &spiflash0; + gpio0 = &gpio0; + gpio1 = &gpio1; + ethernet0 = ð0; + ethernet1 = ð1; + spi0 = &spi0; + i2c0 = &i2c0; + i2c1 = &i2c1; + usb0 = &usb0; + usb1 = &usb1; + pinctrl0 = &pinctrl0; + sar-reg0 = "/config-space/sar-reg"; + }; + + usb1phy: usb-phy { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +ð0 { + status = "okay"; + phy-handle = <&phy0>; +}; + +/* USB0 is a host USB */ +&usb0 { + status = "okay"; +}; + +/* USB1 is a peripheral USB */ +&usb1 { + status = "okay"; + phys = <&usb1phy>; + phy-names = "usb-phy"; + dr_mode = "peripheral"; +}; + +&spi0 { + status = "okay"; + + spiflash0: flash@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + spi-tx-bus-width = <1>; /* 1-single, 2-dual, 4-quad */ + spi-rx-bus-width = <1>; /* 1-single, 2-dual, 4-quad */ + reg = <0>; + + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&pinctrl0 { + /* + * MPP Bus: MPP# mode# + * eMMC [0-11] 0x1 + * SPI[0] [12-17] 0x1 + * TSEN_INT [18] 0x1 + * DEV_INIT [19] 0x1 + * SPI[1] [20-23] 0x3 + * UART[1] [24-25] 0x3 + * I2C[0] [26-27] 0x1 + * XSMI[0] [28-29] 0x1 // SCH use SMI[0], reversed due to CPSS problem + * SMI[1] [30-31] 0x2 // SCH use XSMI[1], reversed due to CPSS problem + * UART[0] [32-33] 0x1 + * OOB_SMI [34-35] 0x1 + * PTP_CLK0_OUT [36] 0x1 + * PTP_PULSE_OUT [37] 0x1 + * RCVR_CLK_OUT [38] 0x1 + * GPIO(in/out) [39] 0x0 + * GPIO(in/out) [40] 0x0 + * PTP_REF_CLK [41] 0x1 + * PTP_CLK0 [42] 0x1 + * LED0_CLK [43] 0x1 + * LED0_STB [44] 0x1 + * LED0_DATA [45] 0x1 + */ + /* 0 1 2 3 4 5 6 7 8 9 */ + pin-func = < 1 1 1 1 1 1 1 1 1 1 + 1 1 1 1 1 1 1 1 1 1 + 3 3 3 3 3 3 1 1 1 1 + 2 2 1 1 1 1 1 1 1 0 + 0 1 1 1 1 1 >; +}; diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index e2c98dffe2..594e9a03d9 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -98,7 +98,7 @@ config CUSTOMER_BOARD_SUPPORT bool
choice - prompt "Armada XP/375/38x/3700/7K/8K board select" + prompt "Armada XP/375/38x/3700/7K/8K/Alleycat-5 board select" optional
config TARGET_CLEARFOG @@ -150,6 +150,10 @@ config TARGET_MVEBU_ARMADA_8K select BOARD_LATE_INIT imply SCSI
+config TARGET_MVEBU_ALLEYCAT5 + bool "Support AlleyCat 5 platforms" + select ALLEYCAT_5 + config TARGET_OCTEONTX2_CN913x bool "Support CN913x platforms" select ARMADA_8K @@ -258,6 +262,7 @@ config SYS_BOARD default "x530" if TARGET_X530 default "db-xc3-24g4xg" if TARGET_DB_XC3_24G4XG default "crs3xx-98dx3236" if TARGET_CRS3XX_98DX3236 + default "mvebu_alleycat-5" if TARGET_MVEBU_ALLEYCAT5
config SYS_CONFIG_NAME default "clearfog" if TARGET_CLEARFOG @@ -278,6 +283,7 @@ config SYS_CONFIG_NAME default "x530" if TARGET_X530 default "db-xc3-24g4xg" if TARGET_DB_XC3_24G4XG default "crs3xx-98dx3236" if TARGET_CRS3XX_98DX3236 + default "mvebu_alleycat-5" if TARGET_MVEBU_ALLEYCAT5
config SYS_VENDOR default "Marvell" if TARGET_DB_MV784MP_GP @@ -297,6 +303,7 @@ config SYS_VENDOR default "gdsys" if TARGET_CONTROLCENTERDC default "alliedtelesis" if TARGET_X530 default "mikrotik" if TARGET_CRS3XX_98DX3236 + default "Marvell" if TARGET_MVEBU_ALLEYCAT5
config SYS_SOC default "mvebu" diff --git a/board/Marvell/mvebu_alleycat-5/MAINTAINERS b/board/Marvell/mvebu_alleycat-5/MAINTAINERS new file mode 100644 index 0000000000..480c07c5f0 --- /dev/null +++ b/board/Marvell/mvebu_alleycat-5/MAINTAINERS @@ -0,0 +1,6 @@ +RD-AC5X BOARD +M: Chris Packham chris.packham@alliedtelesis.co.nz +S: Maintained +F: board/Marvell/mvebu_alleycat-5/ +F: include/configs/mvebu_alleycat-5.h +F: configs/mvebu_ac5_rd_defconfig diff --git a/board/Marvell/mvebu_alleycat-5/Makefile b/board/Marvell/mvebu_alleycat-5/Makefile new file mode 100644 index 0000000000..29254b4d64 --- /dev/null +++ b/board/Marvell/mvebu_alleycat-5/Makefile @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0+ + +obj-y := board.o diff --git a/board/Marvell/mvebu_alleycat-5/board.c b/board/Marvell/mvebu_alleycat-5/board.c new file mode 100644 index 0000000000..619cd6c6cd --- /dev/null +++ b/board/Marvell/mvebu_alleycat-5/board.c @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include <common.h> +#include <asm/global_data.h> + +DECLARE_GLOBAL_DATA_PTR; + +int board_init(void) +{ + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + + return 0; +} diff --git a/configs/mvebu_ac5_rd_defconfig b/configs/mvebu_ac5_rd_defconfig new file mode 100644 index 0000000000..9235a398c5 --- /dev/null +++ b/configs/mvebu_ac5_rd_defconfig @@ -0,0 +1,81 @@ +CONFIG_ARM=y +CONFIG_ARCH_CPU_INIT=y +CONFIG_ARCH_MVEBU=y +CONFIG_TEXT_BASE=0x200000000 +CONFIG_SYS_MALLOC_LEN=0x900000 +CONFIG_TARGET_MVEBU_ALLEYCAT5=y +CONFIG_ENV_SIZE=0x10000 +CONFIG_ENV_OFFSET=0x400000 +CONFIG_ENV_SECT_SIZE=0x10000 +CONFIG_DM_GPIO=y +CONFIG_DEFAULT_DEVICE_TREE="ac5-98dx35xx-rd" +CONFIG_SYS_LOAD_ADDR=0x202000000 +CONFIG_SYS_MEMTEST_START=0x200800000 +CONFIG_SYS_MEMTEST_END=0x200ffffff +CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x200FF0000 +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_FIT=y +CONFIG_BOOTDELAY=-1 +CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y +CONFIG_SYS_CONSOLE_INFO_QUIET=y +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_ARCH_EARLY_INIT_R=y +CONFIG_ARCH_MISC_INIT=y +CONFIG_CMD_BOOTZ=y +CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10 +CONFIG_CMD_MEMTEST=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y +CONFIG_CMD_SPI=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_CACHE=y +CONFIG_CMD_TIME=y +CONFIG_CMD_MVEBU_BUBT=y +CONFIG_CMD_REGULATOR=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_UBI=y +CONFIG_MAC_PARTITION=y +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_CLK=y +CONFIG_CLK_MVEBU=y +CONFIG_DM_PCA953X=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_MVTWSI=y +CONFIG_MISC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_XENON=y +CONFIG_MTD=y +CONFIG_SPI_FLASH_GIGADEVICE=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_PHY_MARVELL=y +CONFIG_PHY_GIGE=y +CONFIG_MVNETA=y +CONFIG_MVMDIO=y +CONFIG_PHY=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_ARMADA_8K=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_DM_RTC=y +CONFIG_DM_SCSI=y +CONFIG_SYS_NS16550=y +CONFIG_MVEBU_A3700_SPI=y +CONFIG_DM_THERMAL=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_HOST_ETHER=y +CONFIG_USB_ETHER_ASIX=y +CONFIG_USB_ETHER_ASIX88179=y +CONFIG_USB_ETHER_MCS7830=y +CONFIG_USB_ETHER_RTL8152=y +CONFIG_USB_ETHER_SMSC95XX=y diff --git a/include/configs/mvebu_alleycat-5.h b/include/configs/mvebu_alleycat-5.h new file mode 100644 index 0000000000..41bdfae6c3 --- /dev/null +++ b/include/configs/mvebu_alleycat-5.h @@ -0,0 +1,42 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2018 Marvell International Ltd + */ + +#ifndef _CONFIG_MVEBU_ALLEYCAY_5_H +#define _CONFIG_MVEBU_ALLEYCAY_5_H + +#include <asm/arch/soc.h> + +/* additions for new ARM relocation support */ +#define CONFIG_SYS_SDRAM_BASE 0x200000000 + +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \ + 115200, 230400, 460800, 921600 } + +/* Default Env vars */ +#define CONFIG_IPADDR 0.0.0.0 /* In order to cause an error */ +#define CONFIG_SERVERIP 0.0.0.0 /* In order to cause an error */ +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_GATEWAYIP 0.0.0.0 +#define CONFIG_ROOTPATH "/srv/nfs/" /* Default Dir for NFS */ + +#define BOOT_TARGET_DEVICES(func) \ + func(USB, usb, 0) \ + func(DHCP, dhcp, na) + +#include <config_distro_bootcmd.h> + +#define CONFIG_EXTRA_ENV_SETTINGS \ + BOOTENV \ + "kernel_addr_r=0x202000000\0" \ + "fdt_addr_r=0x201000000\0" \ + "ramdisk_addr_r=0x206000000\0" \ + "fdtfile=marvell/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" + +/* + * High Level Configuration Options (easy to change) + */ +#define CONFIG_SYS_TCLK 325000000 + +#endif /* _CONFIG_MVEBU_ALLEYCAY_5_H */