Reworked the initial processor initialzation sequence: * introduced cpu_early_init_f that is run in address space 1 (AS=1) * Moved TLB/LAW and CCSR init into cpu_early_init_f() * Reworked initial asm code to do most of the core init before TLBs
The main reasons for these changes are to allow handling of 36-bit phys addresses in the future and some of the issues that will exist when we do that.
There are a few caveats on what can be initialized via the LAW and TLB static tables: * TLB entry 14/15 can't be initialized via the TLB table * any LAW that covers the implicit boot window (4G-8M to 4G) must map to the code that is currently executing.
Signed-off-by: Kumar Gala galak@kernel.crashing.org --- cpu/mpc85xx/cpu_init.c | 56 +++++++++++++++++++-- cpu/mpc85xx/start.S | 131 +++++++++++++++++++++++------------------------- 2 files changed, 115 insertions(+), 72 deletions(-)
diff --git a/cpu/mpc85xx/cpu_init.c b/cpu/mpc85xx/cpu_init.c index 9a65142..4e2bfe7 100644 --- a/cpu/mpc85xx/cpu_init.c +++ b/cpu/mpc85xx/cpu_init.c @@ -31,6 +31,7 @@ #include <asm/processor.h> #include <ioports.h> #include <asm/io.h> +#include <asm/mmu.h> #include <asm/fsl_law.h>
DECLARE_GLOBAL_DATA_PTR; @@ -123,6 +124,54 @@ void config_8560_ioports (volatile ccsr_cpm_t * cpm) } #endif
+/* We run cpu_init_early_f in AS = 1 */ +void cpu_init_early_f(void) +{ + set_tlb(0, CFG_CCSRBAR, CFG_CCSRBAR, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 1, 0, BOOKE_PAGESZ_4K, 0); + + /* set up CCSR if we want it moved */ +#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR) + { + u32 temp; + + set_tlb(0, CFG_CCSRBAR_DEFAULT, CFG_CCSRBAR_DEFAULT, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 1, 1, BOOKE_PAGESZ_4K, 0); + + temp = in_be32((volatile u32 *)CFG_CCSRBAR_DEFAULT); + out_be32((volatile u32 *)CFG_CCSRBAR_DEFAULT, CFG_CCSRBAR >> 12); + + temp = in_be32((volatile u32 *)CFG_CCSRBAR); + } +#endif + + init_laws(); + invalidate_tlb(0); +#ifdef CONFIG_FSL_INIT_TLBS + init_tlbs(); +#else + { + extern u32 tlb1_entry; + u32 *tmp = &tlb1_entry; + int i; + int num = tmp[2]; + + /* skip to actual table */ + tmp += 3; + + for (i = 0; i < num; i++, tmp += 4) { + mtspr(MAS0, tmp[0]); + mtspr(MAS1, tmp[1]); + mtspr(MAS2, tmp[2]); + mtspr(MAS3, tmp[3]); + asm volatile("isync;msync;tlbwe;isync"); + } + } +#endif +} + /* * Breathe some life into the CPU... * @@ -135,16 +184,15 @@ void cpu_init_f (void) volatile ccsr_lbc_t *memctl = (void *)(CFG_MPC85xx_LBC_ADDR); extern void m8560_cpm_reset (void);
+ disable_tlb(14); + disable_tlb(15); + /* Pointer is writable since we allocated a register for it */ gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
/* Clear initial global data */ memset ((void *) gd, 0, sizeof (gd_t));
-#ifdef CONFIG_FSL_LAW - init_laws(); -#endif - #ifdef CONFIG_CPM2 config_8560_ioports((ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR); #endif diff --git a/cpu/mpc85xx/start.S b/cpu/mpc85xx/start.S index 2044722..e8e5eb2 100644 --- a/cpu/mpc85xx/start.S +++ b/cpu/mpc85xx/start.S @@ -143,68 +143,8 @@ _start_e500: li r1,0x0f00 mtspr IVOR15,r1 /* 15: Debug */
- - /* - * After reset, CCSRBAR is located at CFG_CCSRBAR_DEFAULT, i.e. - * 0xff700000-0xff800000. We need add a TLB1 entry for this 1MB - * region before we can access any CCSR registers such as L2 - * registers, Local Access Registers,etc. We will also re-allocate - * CFG_CCSRBAR_DEFAULT to CFG_CCSRBAR immediately after TLB1 setup. - * - * Please refer to board-specif directory for TLB1 entry configuration. - * (e.g. board/<yourboard>/init.S) - * - */ - bl tlb1_entry - mr r5,r0 - lwzu r4,0(r5) /* how many TLB1 entries we actually use */ - mtctr r4 - -0: lwzu r6,4(r5) - lwzu r7,4(r5) - lwzu r8,4(r5) - lwzu r9,4(r5) - mtspr MAS0,r6 - mtspr MAS1,r7 - mtspr MAS2,r8 - mtspr MAS3,r9 - isync - msync - tlbwe - isync - bdnz 0b - -1: -#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR) - /* Special sequence needed to update CCSRBAR itself */ - lis r4,CFG_CCSRBAR_DEFAULT@h - ori r4,r4,CFG_CCSRBAR_DEFAULT@l - - lis r5,CFG_CCSRBAR@h - ori r5,r5,CFG_CCSRBAR@l - srwi r6,r5,12 - stw r6,0(r4) - isync - - lis r5,0xffff - ori r5,r5,0xf000 - lwz r5,0(r5) - isync - - lis r3,CFG_CCSRBAR@h - lwz r5,CFG_CCSRBAR@l(r3) - isync -#endif - - - /* set up local access windows, defined at board/<boardname>/init.S */ - lis r7,CFG_CCSRBAR@h - ori r7,r7,CFG_CCSRBAR@l - /* Clear and set up some registers. */ - li r0,0 - mtmsr r0 - li r0,0x0000 + li r0,0x0000 lis r1,0xffff mtspr DEC,r0 /* prevent dec exceptions */ mttbl r0 /* prevent fit & wdt exceptions */ @@ -214,18 +154,13 @@ _start_e500: mtspr ESR,r0 /* clear exception syndrome register */ mtspr MCSR,r0 /* machine check syndrome register */ mtxer r0 /* clear integer exception register */ - lis r1,0x0002 /* set CE bit (Critical Exceptions) */ - ori r1,r1,0x1200 /* set ME/DE bit */ - mtmsr r1 /* change MSR */ - isync
/* Enable Time Base and Select Time Base Clock */ lis r0,HID0_EMCP@h /* Enable machine check */ #if defined(CONFIG_ENABLE_36BIT_PHYS) - ori r0,r0,(HID0_TBEN|HID0_ENMAS7)@l /* Enable Timebase & MAS7 */ -#else - ori r0,r0,HID0_TBEN@l /* enable Timebase */ + ori r0,r0,HID0_ENMAS7@l /* Enable MAS7 */ #endif + ori r0,r0,HID0_TBEN@l /* Enable Timebase */ mtspr HID0,r0
li r0,(HID1_ASTME|HID1_ABE)@l /* Addr streaming & broadcast */ @@ -246,6 +181,58 @@ _start_e500: mtspr DBCR0,r0 #endif
+ /* create a temp mapping in AS=1 to the boot window */ + lis r6,FSL_BOOKE_MAS0(1, 15, 0)@h + ori r6,r6,FSL_BOOKE_MAS0(1, 15, 0)@l + + lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16M)@h + ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16M)@l + + lis r8,FSL_BOOKE_MAS2(TEXT_BASE, (MAS2_I|MAS2_G))@h + ori r8,r8,FSL_BOOKE_MAS2(TEXT_BASE, (MAS2_I|MAS2_G))@l + + lis r9,FSL_BOOKE_MAS3(0xff800000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h + ori r9,r9,FSL_BOOKE_MAS3(0xff800000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l + + mtspr MAS0,r6 + mtspr MAS1,r7 + mtspr MAS2,r8 + mtspr MAS3,r9 + isync + msync + tlbwe + + /* create a temp mapping in AS=1 to the stack */ + lis r6,FSL_BOOKE_MAS0(1, 14, 0)@h + ori r6,r6,FSL_BOOKE_MAS0(1, 14, 0)@l + + lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16K)@h + ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16K)@l + + lis r8,FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, 0)@h + ori r8,r8,FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, 0)@l + + lis r9,FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h + ori r9,r9,FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l + + mtspr MAS0,r6 + mtspr MAS1,r7 + mtspr MAS2,r8 + mtspr MAS3,r9 + isync + msync + tlbwe + + lis r6,MSR_CE|MSR_ME|MSR_DE|MSR_IS|MSR_DS@h + ori r6,r6,MSR_CE|MSR_ME|MSR_DE|MSR_IS|MSR_DS@l + lis r7,switch_as@h + ori r7,r7,switch_as@l + + mtspr SPRN_SRR0,r7 + mtspr SPRN_SRR1,r6 + rfi + +switch_as: /* L1 DCache is used for initial RAM */
/* Allocate Initial RAM in data cache. @@ -305,6 +292,14 @@ _start_cont: stw r0,+12(r1) /* Save return addr (underflow vect) */
GET_GOT + bl cpu_init_early_f + + /* switch back to AS = 0 */ + lis r3,(MSR_CE|MSR_ME|MSR_DE)@h + ori r3,r3,(MSR_CE|MSR_ME|MSR_DE)@l + mtmsr r3 + isync + bl cpu_init_f bl board_init_f isync