The binding represents the MDIO controller as a child device tree node of the MAC device tree node.
The U-Boot driver mostly ignores that child device tree node and just hardcodes the resources it uses to support both the MAC and MDIO in a single driver.
However, some resources like pinctrl muxing states are thus ignored. This has been a problem with some device trees that will put some pinctrl states on the MDIO device tree node, like the SK-AM62 Device Tree does.
Let's rework the driver a bit to create a dummy MDIO driver that we will then get during our initialization to force the core to select the right muxing.
Signed-off-by: Maxime Ripard mripard@kernel.org --- drivers/net/ti/Kconfig | 1 + drivers/net/ti/am65-cpsw-nuss.c | 67 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 68 insertions(+)
diff --git a/drivers/net/ti/Kconfig b/drivers/net/ti/Kconfig index d9f1c019a885..02660e4fbb44 100644 --- a/drivers/net/ti/Kconfig +++ b/drivers/net/ti/Kconfig @@ -41,6 +41,7 @@ endchoice config TI_AM65_CPSW_NUSS bool "TI K3 AM65x MCU CPSW Nuss Ethernet controller driver" depends on ARCH_K3 + imply DM_MDIO imply MISC_INIT_R imply MISC imply SYSCON diff --git a/drivers/net/ti/am65-cpsw-nuss.c b/drivers/net/ti/am65-cpsw-nuss.c index ce52106e5238..29a4284a9b70 100644 --- a/drivers/net/ti/am65-cpsw-nuss.c +++ b/drivers/net/ti/am65-cpsw-nuss.c @@ -15,6 +15,7 @@ #include <dm.h> #include <dm/device_compat.h> #include <dm/lists.h> +#include <dm/pinctrl.h> #include <dma-uclass.h> #include <dm/of_access.h> #include <miiphy.h> @@ -605,14 +606,69 @@ static const struct soc_attr k3_mdio_soc_data[] = { { /* sentinel */ }, };
+static ofnode am65_cpsw_find_mdio(ofnode parent) +{ + ofnode node; + + ofnode_for_each_subnode(node, parent) + if (ofnode_device_is_compatible(node, "ti,cpsw-mdio")) + return node; + + return ofnode_null(); +} + +static int am65_cpsw_mdio_setup(struct udevice *dev) +{ + struct am65_cpsw_priv *priv = dev_get_priv(dev); + struct am65_cpsw_common *cpsw_common = priv->cpsw_common; + struct udevice *mdio_dev; + ofnode mdio; + int ret; + + mdio = am65_cpsw_find_mdio(dev_ofnode(cpsw_common->dev)); + if (!ofnode_valid(mdio)) + return -ENODEV; + + /* + * The MDIO controller is represented in the DT binding by a + * subnode of the MAC controller. + * + * Our driver largely ignores that and supports MDIO by + * hardcoding the register offsets. + * + * However, some resources (clocks, pinctrl) might be tied to + * the MDIO node, and thus ignored. + * + * Clocks are not a concern at the moment since it's shared + * between the MAC and MDIO, so the driver handles both at the + * same time. + * + * However, we do need to make sure the pins states tied to the + * MDIO node are configured properly. Fortunately, the core DM + * does that for use when we get a device, so we can work around + * that whole issue by just requesting a dummy MDIO driver to + * probe, and our pins will get muxed. + */ + ret = uclass_get_device_by_ofnode(UCLASS_MDIO, mdio, &mdio_dev); + if (ret) + return ret; + + return 0; +} + static int am65_cpsw_mdio_init(struct udevice *dev) { struct am65_cpsw_priv *priv = dev_get_priv(dev); struct am65_cpsw_common *cpsw_common = priv->cpsw_common; + int ret;
if (!priv->has_phy || cpsw_common->bus) return 0;
+ ret = am65_cpsw_mdio_setup(dev); + if (ret) + return ret; + cpsw_common->bus = cpsw_mdio_init(dev->name, cpsw_common->mdio_base, cpsw_common->bus_freq, @@ -868,3 +924,14 @@ U_BOOT_DRIVER(am65_cpsw_nuss_port) = { .plat_auto = sizeof(struct eth_pdata), .flags = DM_FLAG_ALLOC_PRIV_DMA | DM_FLAG_OS_PREPARE, }; + +static const struct udevice_id am65_cpsw_mdio_ids[] = { + { .compatible = "ti,cpsw-mdio" }, + { } +}; + +U_BOOT_DRIVER(am65_cpsw_mdio) = { + .name = "am65_cpsw_mdio", + .id = UCLASS_MDIO, + .of_match = am65_cpsw_mdio_ids, +};