On Wed, Jul 17, 2019 at 9:38 AM Jagan Teki jagan@amarulasolutions.com wrote:
On Wed, Jul 17, 2019 at 9:20 AM Anup Patel Anup.Patel@wdc.com wrote:
This patchset adds:
- SiFive SPI driver
- New MMC SPI driver based on DM_MMC and DM_SPI
- Enables SiFive SPI driver and MMC SPI driver for SiFive Unleashed board
With this patch series, we can now load files from SD card on SiFive Unleashed board. Many thanks to Bhargav for porting SiFive SPI driver and updating MMC SPI driver for us.
These patches can be also found in riscv_unleashed_mmc_spi_v5 branch of: https//github.com/avpatel/u-boot.git
Changes since v4:
- Renamed kconfig option from SIFIVE_SPI to SPI_SIFIVE for consistency
- Added dummy claim_bus() and release_bus() callbacks
Changes since v3:
- Removed PATCH2, PATCH3, and PATCH4 because these are already merged
- Added separate patch to use SPI_XFER_xyz flags in MMC_SPI driver
- Use readl/writel directly instead of sifive_spi_read/sifi_spi_write
- Use SPI_XFER_xyz flags to enable/disable chipselect
- Remove unused callback sifive_spi_cs_info()
Changes since v2:
- Minor fixes in PATCH1 which adds SiFive SPI driver
- Removed CONFIG_MMC_SPI_xyz from scripts/config_whitelist.txt
- Removed cmd/mmc_spi and all its refrences as separate patch
- Removed DM_SPI and DM_MMC from SiFive FU540 Kconfig
Changes since v1:
- Make response matching part belongs to mmc_spi_sendcmd()
- Match response to zero for SEND_STATUS (CMD13)
- Add separate patch for updating SiFive FU540 Documentation
Anup Patel (2): mmc: mmc_spi: Use SPI_XFER_BEGIN and SPI_XFER_END flags doc: sifive-fu540: Update README for SiFive SPI and MMC SPI drivers
Bhargav Shah (2): spi: Add SiFive SPI driver riscv: sifive: fu540: Enable SiFive SPI and MMC SPI drivers
board/sifive/fu540/Kconfig | 6 + doc/README.sifive-fu540 | 4 +- drivers/mmc/mmc_spi.c | 4 +- drivers/spi/Kconfig | 8 + drivers/spi/Makefile | 1 + drivers/spi/spi-sifive.c | 375 +++++++++++++++++++++++++++++++++++++ 6 files changed, 394 insertions(+), 4 deletions(-) create mode 100644 drivers/spi/spi-sifive.c
I would like to pick entire series on spi tree, but it has some boards changes so I would like to ask the board maintainers to give a permissions to do so, if not possible I can take only spi changes.
Last 2 patches depend on below mentioned series so won't apply for you. I guess you can pickup SPI driver and MMC_SPI change.
Refer, https://www.mail-archive.com/u-boot@lists.denx.de/msg331405.html
Regards, Anup