Hi, I'm facing a strange problem that took quite a while to analyze.
I'm porting U-Boot to a new board and thus some problem is expected. I am also trying to configure U-Boot in a useful (for my purposes) way.
I decided to switch Environment storage from SPI NOR to SD card (in a file in FAT partition.
Before switch I had both SPI NOR (MTD) and MMC working.
U-Boot 2020.01-rc5-00074-g57fe7de5a3-dirty (Jan 04 2020 - 01:38:21 +0100)
CPU: MT7628 Rev 1.2 - Boot from XTAL (3-Byte SPI Addr) Model: VoCore2 DRAM: 128 MiB MMC: mmc@10130000: 0 Loading Environment from SPI Flash... SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB OK In: uart2@e00 Out: uart2@e00 Err: uart2@e00 Model: VoCore2 => mtd list List of MTD devices:
- nor0
- type: NOR flash - block size: 0x1000 bytes - min I/O: 0x1 bytes - 0x000000000000-0x000001000000 : "nor0" - 0x000000000000-0x000000050000 : "u-boot" - 0x000000050000-0x000000300000 : "kernel" - 0x000000300000-0x000000ffe000 : "squash" - 0x000000ffe000-0x000000fff000 : "env" - 0x000000fff000-0x000001000000 : "factory" => mmc part
Partition Map for MMC device 0 -- Partition Type: DOS
Part Start Sector Num Sectors UUID Type 1 2048 262144 f31c8249-01 0c 2 264192 4194304 f31c8249-02 83 3 4458496 327680 f31c8249-03 83 4 4786176 10737664 f31c8249-04 05 Extd 5 4788224 2097152 f31c8249-05 83 6 6887424 2097152 f31c8249-06 83 =>
I made a minimal change in configuration:
mcon@cinderella:/tmp/u-boot$ git diff diff --git a/configs/vocore_vocore2_defconfig b/configs/vocore_vocore2_defconfig index ad1b580431..ece98beea0 100644 --- a/configs/vocore_vocore2_defconfig +++ b/configs/vocore_vocore2_defconfig @@ -1,8 +1,6 @@ CONFIG_MIPS=y CONFIG_SYS_TEXT_BASE=0x80010000 CONFIG_ENV_SIZE=0x00001000 -CONFIG_ENV_OFFSET=0x00FFE000 -CONFIG_ENV_SECT_SIZE=0x00001000 CONFIG_ARCH_MTMIPS=y CONFIG_BOARD_VOCORE2=y CONFIG_MIPS_BOOT_FDT=y @@ -37,8 +35,9 @@ CONFIG_MTDIDS_DEFAULT="nor0=spi0.0" CONFIG_MTDPARTS_DEFAULT="spi0.0:320k(u-boot),2752k(kernel),13304k(filesystem),4k(env),-(factory)" # CONFIG_ISO_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="vocore_vocore2" -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_ENV_ADDR=0x00FFE000 +CONFIG_ENV_IS_IN_FAT=y +CONFIG_ENV_FAT_INTERFACE="mmc" +CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" # CONFIG_NET is not set # CONFIG_DM_DEVICE_REMOVE is not set CONFIG_BLK=y mcon@cinderella:/tmp/u-boot$
... but it seems very destructive for spi:
U-Boot 2020.01-rc5-00074-g0cac9383d7-dirty (Jan 04 2020 - 01:55:34 +0100)
CPU: MT7628 Rev 1.2 - Boot from XTAL (3-Byte SPI Addr) Model: VoCore2 DRAM: 128 MiB MMC: mmc@10130000: 0 Loading Environment from FAT... OK In: uart2@e00 Out: uart2@e00 Err: uart2@e00 Model: VoCore2 => mmc part
Partition Map for MMC device 0 -- Partition Type: DOS
Part Start Sector Num Sectors UUID Type 1 2048 262144 f31c8249-01 0c 2 264192 4194304 f31c8249-02 83 3 4458496 327680 f31c8249-03 83 4 4786176 10737664 f31c8249-04 05 Extd 5 4788224 2097152 f31c8249-05 83 6 6887424 2097152 f31c8249-06 83 => mtd list Could not find a valid device for spi0.0 List of MTD devices: No MTD device found =>
I assume some initialization is not done, but I would like some help to debug this as I did *not* change anything in SPI (aside from setting it in .dts). OTOH I had to change a bit MMC handling, but that shouldn't be relevant, or is it? I attach my complete patch against a fairly recent commit (it was "master" a few hours ago). The patch is to the working ENV_IS_IN_SPI_FLASH version. Changes for "not working" with ENV_IS_IN_FAT are above.
Please advise. Thanks in Advance Mauro