To enable splash at A53 SPL, need to do memory map changes which involves locate stack above malloc and have enough space to load bmp image above stack. To load a 1920X1200 image a minimum of 8.8MB space is needed, to support it move malloc down to 0x80b80000 from 0x80480000 and bss to 0x80c80000 to have 1MB buffer between malloc and BSS.
Observed SPL size 195KB, CONFIG_SPL_SIZE_LIMIT set to 256KB. Observed stack size 1904Bytes, CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK set to 2KB. CONFIG_SPL_SYS_REPORT_STACK_F_USAGE config sets stack above the malloc and reports for stack overflow.
Memory map at A53 SPL before splash screen 0x80000000+---------------------+ | Empty 512 KB | | | 0x80080000+---------------------+ | Text Base | | 352 KB | | | 0x800D8000+---------------------+ | | | | | Empty 3.6MB | | | | | 0x80477660+---------------------+ | Stack 2 KB | 0x80477e60+---------------------+ | GD 416 Bytes | 0x80478000+---------------------+ | Malloc 352 KB | | | 0x80480000+---------------------+ | | | | | | | | | Empty 5.5 MB | | | | | | | | | 0x80a00000+---------------------+ | | | BSS 512 KB | | | 0x80a80000+---------------------+ | | | | | | | | | Empty 5.5 MB | | | | | | | | | 0x81000000+---------------------+FIT Image load address
New memory map with splash screen at SPL 0x80000000+---------------------+ | Empty 512 KB | | | 0x80080000+---------------------+ | Text Base | | 352 KB | | | 0x800D8000+---------------------+ | Empty 1.1MB | | | 0x80200000+---------------------+ | | | | | | | BMP Image Load | | | | 9.4 MB | | | | | | | | | | | | | 0x80b77660+---------------------+ | Stack 2KB | 0x80b77e60+---------------------+ | GD 416 Bytes | 0x80b78000+---------------------+ | | | Malloc 352KB | 0x80b80000+---------------------+ | | | Empty 1 MB | | | 0x80c80000+---------------------+ | BSS 512 KB | | | 0x80d00000+---------------------+ | | | | | Empty 3.0 MB | | | | | | | 0x81000000+---------------------+FIT Image load addressi
Signed-off-by: Nikhil M Jain n-jain1@ti.com --- configs/am62x_evm_a53_defconfig | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/configs/am62x_evm_a53_defconfig b/configs/am62x_evm_a53_defconfig index cc9c8eab3e..6490b57a0f 100644 --- a/configs/am62x_evm_a53_defconfig +++ b/configs/am62x_evm_a53_defconfig @@ -8,14 +8,18 @@ CONFIG_SOC_K3_AM625=y CONFIG_K3_ATF_LOAD_ADDR=0x9e780000 CONFIG_TARGET_AM625_A53_EVM=y CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80480000 +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80b80000 +CONFIG_SF_DEFAULT_SPEED=25000000 CONFIG_SPL_DM_SPI=y CONFIG_DEFAULT_DEVICE_TREE="k3-am625-sk" CONFIG_SPL_TEXT_BASE=0x80080000 +CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y CONFIG_SPL_STACK_R_ADDR=0x82000000 +CONFIG_SPL_SIZE_LIMIT=0x40000 +CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x4000 CONFIG_SPL_FS_FAT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y @@ -27,8 +31,9 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern; setenv fdtfile ti/${name_fdt}; run distro_bootcmd" CONFIG_SPL_MAX_SIZE=0x58000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x80a00000 +CONFIG_SPL_BSS_START_ADDR=0x80c80000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 +CONFIG_SPL_SYS_REPORT_STACK_F_USAGE=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y @@ -68,7 +73,6 @@ CONFIG_MMC_SDHCI_ADMA=y CONFIG_SPL_MMC_SDHCI_ADMA=y CONFIG_MMC_SDHCI_AM654=y CONFIG_DM_SPI_FLASH=y -CONFIG_SF_DEFAULT_SPEED=25000000 CONFIG_SPI_FLASH_SFDP_SUPPORT=y CONFIG_SPI_FLASH_SOFT_RESET=y CONFIG_SPI_FLASH_SOFT_RESET_ON_BOOT=y @@ -97,4 +101,3 @@ CONFIG_SYSRESET=y CONFIG_SPL_SYSRESET=y CONFIG_SYSRESET_TI_SCI=y CONFIG_FS_FAT_MAX_CLUSTSIZE=16384 -CONFIG_OF_LIBFDT_OVERLAY=y