On 03.03.21 01:55, Phil Sutter wrote:
Board-specific code lacked a Kconfig file defining CONFIG_SYS_BOARD, CONFIG_SYS_VENDOR, etc - patch 1 fixes that.
I was very pleased to notice the recent changes in PCI/USB code fixed xhci-pci functionality on DS414, so patch 2 enables XHCI support in defconfig.
Adjusting DS109 atags code for DS414 allowed to successfully boot vendor Linux, so I went ahead and generalized the code to support both boards in patch 3.
Patch 4 introduces a misc_init_r() routine populating environment from Synology's special flash partition if appropriate - less manual work for users and no need for random MAC address fallback anymore.
Patch 6 extends the default environment by a command to update u-boot via tftp.
Phil Sutter (5): ds414: Add a Kconfig defining some strings configs: ds414: Enable XHCI_PCI by default board/Synology: Unify legacy kernel support ds414: Auto-populate env if appropriate ds414: Add sample u-boot update command
board/Synology/common/Makefile | 5 +++ board/Synology/common/legacy.c | 75 +++++++++++++++++++++++++++++++++ board/Synology/common/legacy.h | 33 +++++++++++++++ board/Synology/ds109/ds109.c | 32 -------------- board/Synology/ds109/ds109.h | 17 -------- board/Synology/ds414/Kconfig | 12 ++++++ board/Synology/ds414/cmd_syno.c | 2 +- board/Synology/ds414/ds414.c | 13 ++++++ configs/ds414_defconfig | 7 ++- include/configs/ds109.h | 3 +- include/configs/ds414.h | 20 ++++++++- 11 files changed, 163 insertions(+), 56 deletions(-) create mode 100644 board/Synology/common/Makefile create mode 100644 board/Synology/common/legacy.c create mode 100644 board/Synology/common/legacy.h create mode 100644 board/Synology/ds414/Kconfig
Applied to u-boot-marvell/master (whole series)
Thanks, Stefan