Zynq> load mmc 0:1 0x1000000 fit.itb
reading fit.itb at pos 0, maxsize 0, to memory pos 0x01000000
4947228 bytes read in 283 ms (16.7 MiB/s)
Zynq> bootm 0x1000000
## Loading kernel from FIT Image at 01000000 ...
   Using 'config-1' configuration
   Trying 'kernel-1' kernel subimage
     Description:  ARM OpenWrt Linux-5.15.138
     Type:         Kernel Image
     Compression:  gzip compressed
     Data Start:   0x010000e4
     Data Size:    4936814 Bytes = 4.7 MiB
     Architecture: ARM
     OS:           Linux
     Load Address: 0x00008000
     Entry Point:  0x00008000
     Hash algo:    crc32
     Hash value:   5240d5bb
     Hash algo:    sha1
     Hash value:   4600271e41e01f3194a5372467179e852b06d389
   Verifying Hash Integrity ... crc32+ sha1+ OK
## Loading fdt from FIT Image at 01000000 ...
   Using 'config-1' configuration
   Trying 'fdt-1' fdt subimage
     Description:  ARM OpenWrt tul_zynq-pynq-z2 device tree blob
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x014b5690
     Data Size:    8518 Bytes = 8.3 KiB
     Architecture: ARM
     Hash algo:    crc32
     Hash value:   26dcef04
     Hash algo:    sha1
     Hash value:   4d0eeb6e70f1b87c8df9f2576d05ec77919e431b
   Verifying Hash Integrity ... crc32+ sha1+ OK
   Booting using the fdt blob at 0x14b5690
   Uncompressing Kernel Image ... dst_addr 00008000 | unc_len 62914560 | img_buf 010000e4 | lenp 4936814
OK
   kernel loaded at 0x00008000, end = 0x00c9ab00
   Loading Device Tree to 1eb35000, end 1eb3a145 ... OK
## Transferring control to Linux (at address 00008000)...