The common folder was initialially created for the common parts of the products based on draco-am355x board family. These are the product lines 'pxm2', 'rut' and the base line named 'draco'!
Adding the new capricorn-imx8 board family, common was enhanced without cleanup.
Move all am355x specifics to a new file 'board_am335x'.
Reviewed-by: Alexander Sverdlin alexander.sverdlin@siemens.com Signed-off-by: Enrico Leto enrico.leto@siemens.com --- board/siemens/common/board.c | 54 +++------------------------ board/siemens/common/board_am335x.c | 58 +++++++++++++++++++++++++++++ board/siemens/common/board_am335x.h | 38 +++++++++++++++++++ board/siemens/draco/Makefile | 2 + board/siemens/draco/board.c | 10 ++--- board/siemens/draco/board.h | 32 +++------------- board/siemens/draco/mux.c | 2 +- board/siemens/pxm2/MAINTAINERS | 2 +- board/siemens/pxm2/Makefile | 2 + board/siemens/pxm2/board.c | 10 ++--- board/siemens/pxm2/board.h | 21 ----------- board/siemens/pxm2/mux.c | 2 +- board/siemens/rut/MAINTAINERS | 2 +- board/siemens/rut/Makefile | 2 + board/siemens/rut/board.c | 10 ++--- board/siemens/rut/board.h | 21 ----------- board/siemens/rut/mux.c | 1 + 17 files changed, 129 insertions(+), 140 deletions(-) create mode 100644 board/siemens/common/board_am335x.c create mode 100644 board/siemens/common/board_am335x.h delete mode 100644 board/siemens/pxm2/board.h delete mode 100644 board/siemens/rut/board.h
diff --git a/board/siemens/common/board.c b/board/siemens/common/board.c index ddbb92811cf..981ffe4e69a 100644 --- a/board/siemens/common/board.c +++ b/board/siemens/common/board.c @@ -1,12 +1,11 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * Common board functions for siemens AM335X based boards + * Common board functions for siemens based boards + * + * TI am335x specifics moved to board_am335x.c + * * (C) Copyright 2013 Siemens Schweiz AG * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. - * - * Based on: - * U-Boot file:/board/ti/am335x/board.c - * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ */
#include <common.h> @@ -39,7 +38,6 @@
DECLARE_GLOBAL_DATA_PTR;
- #if CONFIG_IS_ENABLED(DM_I2C) static struct udevice *i2c_dev; #endif @@ -82,39 +80,6 @@ int siemens_ee_read_data(uint address, uchar *buffer, int len) #endif }
- -#ifdef CONFIG_SPL_BUILD -void set_uart_mux_conf(void) -{ - enable_uart0_pin_mux(); -} - -void set_mux_conf_regs(void) -{ - /* Initalize the board header */ - enable_i2c0_pin_mux(); - - /* enable early the console */ - gd->baudrate = CONFIG_BAUDRATE; - serial_init(); - gd->have_console = 1; - - siemens_ee_setup(); - if (read_eeprom() < 0) - puts("Could not get board ID.\n"); - - enable_board_pin_mux(); -} - -void sdram_init(void) -{ - spl_siemens_board_init(); - board_init_ddr(); - - return; -} -#endif /* #ifdef CONFIG_SPL_BUILD */ - #ifndef CONFIG_SPL_BUILD /* * Basic board specific setup. Pinmux has been handled already. @@ -145,15 +110,6 @@ int board_init(void) } #endif /* #ifndef CONFIG_SPL_BUILD */
-#define OSC (V_OSCK/1000000) -const struct dpll_params dpll_ddr = { - DDR_PLL_FREQ, OSC-1, 1, -1, -1, -1, -1}; - -const struct dpll_params *get_dpll_ddr_params(void) -{ - return &dpll_ddr; -} - #ifndef CONFIG_SPL_BUILD
#define MAX_NR_LEDS 10 @@ -232,7 +188,7 @@ U_BOOT_CMD( * defines the startup state of the led, S1 the special state of the led when * it enters e.g. dfu mode. */ -void set_env_gpios(unsigned char state) +static void set_env_gpios(unsigned char state) { char *ptr_env; char str_tmp[5]; /* must contain "ledX"*/ diff --git a/board/siemens/common/board_am335x.c b/board/siemens/common/board_am335x.c new file mode 100644 index 00000000000..c44b09a21e3 --- /dev/null +++ b/board/siemens/common/board_am335x.c @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Common board functions for siemens AM335X based boards + * (C) Copyright Siemens AG 2013 + * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * U-Boot file:/board/ti/am335x/board.c + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + */ + +#include <init.h> +#include <serial.h> +#include <asm/arch/clock.h> +#include "board_am335x.h" + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_SPL_BUILD +void set_uart_mux_conf(void) +{ + enable_uart0_pin_mux(); +} + +void set_mux_conf_regs(void) +{ + /* Initalize the board header */ + enable_i2c0_pin_mux(); + + /* enable early the console */ + gd->baudrate = CONFIG_BAUDRATE; + serial_init(); + gd->have_console = 1; + + siemens_ee_setup(); + if (siemens_read_eeprom() < 0) + puts("Could not get board ID.\n"); + + enable_board_pin_mux(); +} + +void sdram_init(void) +{ + spl_siemens_board_init(); + siemens_init_ddr(); + + return; +} +#endif /* #ifdef CONFIG_SPL_BUILD */ + +#define OSC (V_OSCK/1000000) +const struct dpll_params dpll_ddr = { + DDR_PLL_FREQ, OSC-1, 1, -1, -1, -1, -1}; + +const struct dpll_params *get_dpll_ddr_params(void) +{ + return &dpll_ddr; +} diff --git a/board/siemens/common/board_am335x.h b/board/siemens/common/board_am335x.h new file mode 100644 index 00000000000..ce5bec4f9cb --- /dev/null +++ b/board/siemens/common/board_am335x.h @@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Common board definitions for am335x based boards + * + * Copyright Siemens AG 2023 + * + * Based on: + * TI AM335x boards information header + * u-boot:/board/ti/am335x/board.h + * + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + */ + +#ifndef _BOARD_AM335X_H_ +#define _BOARD_AM335X_H_ + +#include "board.h" + +/* Common functions with product specific implementation */ +void spl_siemens_board_init(void); +void siemens_init_ddr(void); +int siemens_read_eeprom(void); + +#ifdef CONFIG_SPL_BUILD +/* Mux for init: uart?, i2c0 to read the main EEPROM */ +void enable_uart0_pin_mux(void); +void enable_uart1_pin_mux(void); +void enable_uart2_pin_mux(void); +void enable_uart3_pin_mux(void); +void enable_uart4_pin_mux(void); +void enable_uart5_pin_mux(void); +void enable_i2c0_pin_mux(void); + +/* Main mux function to enable other pinmux required on the board */ +void enable_board_pin_mux(void); +#endif /* CONFIG_SPL_BUILD */ + +#endif /* _BOARD_AM335X_H_ */ diff --git a/board/siemens/draco/Makefile b/board/siemens/draco/Makefile index 3e3394a8656..5f41108d3ae 100644 --- a/board/siemens/draco/Makefile +++ b/board/siemens/draco/Makefile @@ -14,6 +14,8 @@ obj-y := mux.o endif
obj-y += board.o +obj-y += ../common/board.o +obj-y += ../common/board_am335x.o ifndef CONFIG_SPL_BUILD obj-y += ../common/factoryset.o endif diff --git a/board/siemens/draco/board.c b/board/siemens/draco/board.c index 43db76490f7..821da67e0ba 100644 --- a/board/siemens/draco/board.c +++ b/board/siemens/draco/board.c @@ -37,7 +37,7 @@ #include <watchdog.h> #include <linux/delay.h> #include "board.h" -#include "../common/board.h" +#include "../common/board_am335x.h" #include "../common/factoryset.h" #include <nand.h>
@@ -159,7 +159,7 @@ static int draco_read_nand_geometry(void) /* * Read header information from EEPROM into global structure. */ -static int read_eeprom(void) +int siemens_read_eeprom(void) { /* Read Siemens eeprom data (DDR3) */ if (siemens_ee_read_data(SIEMENS_EE_ADDR_DDR3, (uchar *)&settings.ddr3, @@ -195,7 +195,7 @@ static int read_eeprom(void) return draco_read_nand_geometry(); }
-static void board_init_ddr(void) +void siemens_init_ddr(void) { struct emif_regs draco_ddr3_emif_reg_data = { .zq_config = 0x50074BE4, @@ -242,7 +242,7 @@ struct ctrl_ioregs draco_ddr3_ioregs = { &draco_ddr3_cmd_ctrl_data, &draco_ddr3_emif_reg_data, 0); }
-static void spl_siemens_board_init(void) +void spl_siemens_board_init(void) { return; } @@ -383,5 +383,3 @@ static void board_nand_cs_init(void) 0x18000000, GPMC_SIZE_16M); } #endif - -#include "../common/board.c" diff --git a/board/siemens/draco/board.h b/board/siemens/draco/board.h index 7c29a45c036..b3a765d2eda 100644 --- a/board/siemens/draco/board.h +++ b/board/siemens/draco/board.h @@ -1,19 +1,14 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* - * board.h - * + * Board definitions for draco products * (C) Copyright 2013 Siemens Schweiz AG * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. * - * Based on: - * TI AM335x boards information header - * u-boot:/board/ti/am335x/board.h - * - * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * TI am335x specifics moved to ../common/board_am335x.h */
-#ifndef _BOARD_H_ -#define _BOARD_H_ +#ifndef _BOARD_DRACO_H_ +#define _BOARD_DRACO_H_
#define PARGS(x) #x , /* Parameter Name */ \ settings.ddr3.x, /* EEPROM Value */ \ @@ -58,21 +53,4 @@ struct draco_baseboard_id { struct chip_data chip; };
-/* - * We have three pin mux functions that must exist. We must be able to enable - * uart0, for initial output and i2c0 to read the main EEPROM. We then have a - * main pinmux function that can be overridden to enable all other pinmux that - * is required on the board. - */ -void enable_uart0_pin_mux(void); -void enable_uart1_pin_mux(void); -void enable_uart2_pin_mux(void); -void enable_uart3_pin_mux(void); -void enable_uart4_pin_mux(void); -void enable_uart5_pin_mux(void); -void enable_i2c0_pin_mux(void); -void enable_board_pin_mux(void); - -/* Forwared declaration, defined in common board.c */ -void set_env_gpios(unsigned char state); -#endif +#endif /* _BOARD_DRACO_H_ */ diff --git a/board/siemens/draco/mux.c b/board/siemens/draco/mux.c index 3f2d41befeb..1bf0fa961aa 100644 --- a/board/siemens/draco/mux.c +++ b/board/siemens/draco/mux.c @@ -16,7 +16,7 @@ #include <asm/arch/mux.h> #include <asm/io.h> #include <i2c.h> -#include "board.h" +#include "../common/board_am335x.h"
static struct module_pin_mux uart0_pin_mux[] = { {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */ diff --git a/board/siemens/pxm2/MAINTAINERS b/board/siemens/pxm2/MAINTAINERS index dc02fe87c9b..49025446079 100644 --- a/board/siemens/pxm2/MAINTAINERS +++ b/board/siemens/pxm2/MAINTAINERS @@ -1,5 +1,5 @@ PXM2 BOARD -M: Samuel Egli samuel.egli@siemens.com +M: Enrico Leto enrico.leto@siemens.com S: Maintained F: board/siemens/pxm2/ F: include/configs/pxm2.h diff --git a/board/siemens/pxm2/Makefile b/board/siemens/pxm2/Makefile index 3e3394a8656..5f41108d3ae 100644 --- a/board/siemens/pxm2/Makefile +++ b/board/siemens/pxm2/Makefile @@ -14,6 +14,8 @@ obj-y := mux.o endif
obj-y += board.o +obj-y += ../common/board.o +obj-y += ../common/board_am335x.o ifndef CONFIG_SPL_BUILD obj-y += ../common/factoryset.o endif diff --git a/board/siemens/pxm2/board.c b/board/siemens/pxm2/board.c index 6a345b5639f..f26e3d8945f 100644 --- a/board/siemens/pxm2/board.c +++ b/board/siemens/pxm2/board.c @@ -35,14 +35,14 @@ #include <miiphy.h> #include <cpsw.h> #include <watchdog.h> -#include "board.h" -#include "../common/factoryset.h" #include "pmic.h" #include <nand.h> #include <bmp_layout.h> +#include "../common/board_am335x.h" +#include "../common/factoryset.h"
#ifdef CONFIG_SPL_BUILD -static void board_init_ddr(void) +void siemens_init_ddr(void) { struct emif_regs pxm2_ddr3_emif_reg_data = { .sdram_config = 0x41805332, @@ -161,7 +161,7 @@ void spl_siemens_board_init(void) } }
-int read_eeprom(void) +int siemens_read_eeprom(void) { /* nothing ToDo here for this board */
@@ -274,5 +274,3 @@ int board_late_init(void) return 0; } #endif - -#include "../common/board.c" diff --git a/board/siemens/pxm2/board.h b/board/siemens/pxm2/board.h deleted file mode 100644 index af21fc47432..00000000000 --- a/board/siemens/pxm2/board.h +++ /dev/null @@ -1,21 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * board.h - * - * (C) Copyright 2013 Siemens Schweiz AG - * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. - * - * Based on: - * TI AM335x boards information header - * u-boot:/board/ti/am335x/board.h - * - * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ - */ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -void enable_uart0_pin_mux(void); -void enable_i2c0_pin_mux(void); -void enable_board_pin_mux(void); -#endif diff --git a/board/siemens/pxm2/mux.c b/board/siemens/pxm2/mux.c index 2f35bb4a730..50ef657de10 100644 --- a/board/siemens/pxm2/mux.c +++ b/board/siemens/pxm2/mux.c @@ -17,7 +17,7 @@ #include <asm/arch/mux.h> #include <asm/io.h> #include <i2c.h> -#include "board.h" +#include "../common/board_am335x.h"
static struct module_pin_mux uart0_pin_mux[] = { {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */ diff --git a/board/siemens/rut/MAINTAINERS b/board/siemens/rut/MAINTAINERS index 1e92710904b..4d8e2567099 100644 --- a/board/siemens/rut/MAINTAINERS +++ b/board/siemens/rut/MAINTAINERS @@ -1,5 +1,5 @@ RUT BOARD -M: Samuel Egli samuel.egli@siemens.com +M: Enrico Leto enrico.leto@siemens.com S: Maintained F: board/siemens/rut/ F: include/configs/rut.h diff --git a/board/siemens/rut/Makefile b/board/siemens/rut/Makefile index 3e3394a8656..5f41108d3ae 100644 --- a/board/siemens/rut/Makefile +++ b/board/siemens/rut/Makefile @@ -14,6 +14,8 @@ obj-y := mux.o endif
obj-y += board.o +obj-y += ../common/board.o +obj-y += ../common/board_am335x.o ifndef CONFIG_SPL_BUILD obj-y += ../common/factoryset.o endif diff --git a/board/siemens/rut/board.c b/board/siemens/rut/board.c index bd1c5894f6a..7dd527349a2 100644 --- a/board/siemens/rut/board.c +++ b/board/siemens/rut/board.c @@ -35,19 +35,19 @@ #include <video.h> #include <watchdog.h> #include <linux/delay.h> -#include "board.h" +#include "../common/board_am335x.h" #include "../common/factoryset.h"
#ifdef CONFIG_SPL_BUILD /* * Read header information from EEPROM into global structure. */ -static int read_eeprom(void) +int siemens_read_eeprom(void) { return 0; }
-static void board_init_ddr(void) +void siemens_init_ddr(void) { struct emif_regs rut_ddr3_emif_reg_data = { .sdram_config = 0x61C04AB2, @@ -124,7 +124,7 @@ err: #define REQUEST_AND_PULSE_RESET(N) \ request_and_pulse_reset(N, #N);
-static void spl_siemens_board_init(void) +void spl_siemens_board_init(void) { REQUEST_AND_PULSE_RESET(ETH_PHY_RESET_GPIO); REQUEST_AND_PULSE_RESET(MAXTOUCH_RESET_GPIO); @@ -244,5 +244,3 @@ int board_late_init(void) return 0; } #endif - -#include "../common/board.c" diff --git a/board/siemens/rut/board.h b/board/siemens/rut/board.h deleted file mode 100644 index af21fc47432..00000000000 --- a/board/siemens/rut/board.h +++ /dev/null @@ -1,21 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * board.h - * - * (C) Copyright 2013 Siemens Schweiz AG - * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. - * - * Based on: - * TI AM335x boards information header - * u-boot:/board/ti/am335x/board.h - * - * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ - */ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -void enable_uart0_pin_mux(void); -void enable_i2c0_pin_mux(void); -void enable_board_pin_mux(void); -#endif diff --git a/board/siemens/rut/mux.c b/board/siemens/rut/mux.c index d80120bbdd2..ff752b676a3 100644 --- a/board/siemens/rut/mux.c +++ b/board/siemens/rut/mux.c @@ -17,6 +17,7 @@ #include <asm/arch/mux.h> #include <asm/io.h> #include <i2c.h> +#include "../common/board_am335x.h"
static struct module_pin_mux uart0_pin_mux[] = { {OFFSET(uart0_rxd), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* UART0_RXD */