Sync sun4i-usb-phy bindings from Linux, since the drivers/phy/allwinner/phy-sun4i-usb.c follow similar.
Sync changes from Linux with below commit: "phy: sun4i-usb: add support for R40 USB PHY" (sha1: f3d96f8d23d8e6d0b7642ee946b9b2ac3418fb4d)
Signed-off-by: Jagan Teki jagan@amarulasolutions.com --- Changes for v9: - Update last commit change of sun4i-usb-phy.txt from Linux instead of merge commit Changes for v8: - %s/follw/follow - Added merge commit from Linux
doc/device-tree-bindings/phy/sun4i-usb-phy.txt | 65 ++++++++++++++++++++++++++ 1 file changed, 65 insertions(+) create mode 100644 doc/device-tree-bindings/phy/sun4i-usb-phy.txt
diff --git a/doc/device-tree-bindings/phy/sun4i-usb-phy.txt b/doc/device-tree-bindings/phy/sun4i-usb-phy.txt new file mode 100644 index 0000000000..c1ce5a0a65 --- /dev/null +++ b/doc/device-tree-bindings/phy/sun4i-usb-phy.txt @@ -0,0 +1,65 @@ +Allwinner sun4i USB PHY +----------------------- + +Required properties: +- compatible : should be one of + * allwinner,sun4i-a10-usb-phy + * allwinner,sun5i-a13-usb-phy + * allwinner,sun6i-a31-usb-phy + * allwinner,sun7i-a20-usb-phy + * allwinner,sun8i-a23-usb-phy + * allwinner,sun8i-a33-usb-phy + * allwinner,sun8i-a83t-usb-phy + * allwinner,sun8i-h3-usb-phy + * allwinner,sun8i-v3s-usb-phy + * allwinner,sun50i-a64-usb-phy +- reg : a list of offset + length pairs +- reg-names : + * "phy_ctrl" + * "pmu0" for H3, V3s and A64 + * "pmu1" + * "pmu2" for sun4i, sun6i, sun7i, sun8i-a83t or sun8i-h3 + * "pmu3" for sun8i-h3 +- #phy-cells : from the generic phy bindings, must be 1 +- clocks : phandle + clock specifier for the phy clocks +- clock-names : + * "usb_phy" for sun4i, sun5i or sun7i + * "usb0_phy", "usb1_phy" and "usb2_phy" for sun6i + * "usb0_phy", "usb1_phy" for sun8i + * "usb0_phy", "usb1_phy", "usb2_phy" and "usb2_hsic_12M" for sun8i-a83t + * "usb0_phy", "usb1_phy", "usb2_phy" and "usb3_phy" for sun8i-h3 +- resets : a list of phandle + reset specifier pairs +- reset-names : + * "usb0_reset" + * "usb1_reset" + * "usb2_reset" for sun4i, sun6i, sun7i, sun8i-a83t or sun8i-h3 + * "usb3_reset" for sun8i-h3 + +Optional properties: +- usb0_id_det-gpios : gpio phandle for reading the otg id pin value +- usb0_vbus_det-gpios : gpio phandle for detecting the presence of usb0 vbus +- usb0_vbus_power-supply: power-supply phandle for usb0 vbus presence detect +- usb0_vbus-supply : regulator phandle for controller usb0 vbus +- usb1_vbus-supply : regulator phandle for controller usb1 vbus +- usb2_vbus-supply : regulator phandle for controller usb2 vbus +- usb3_vbus-supply : regulator phandle for controller usb3 vbus + +Example: + usbphy: phy@01c13400 { + #phy-cells = <1>; + compatible = "allwinner,sun4i-a10-usb-phy"; + /* phy base regs, phy1 pmu reg, phy2 pmu reg */ + reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>; + reg-names = "phy_ctrl", "pmu1", "pmu2"; + clocks = <&usb_clk 8>; + clock-names = "usb_phy"; + resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>; + reset-names = "usb0_reset", "usb1_reset", "usb2_reset"; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */ + usb0_vbus_det-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + };