On Fri, Oct 14, 2022 at 07:06:21PM +0200, Michael Nazzareno Trimarchi wrote:
Hi Tom
On Fri, Oct 14, 2022 at 7:01 PM Tom Rini trini@konsulko.com wrote:
On Fri, Oct 14, 2022 at 06:58:50PM +0200, Michael Nazzareno Trimarchi wrote:
Hi
On Fri, Oct 14, 2022 at 5:18 PM Tom Rini trini@konsulko.com wrote:
Hey all,
I'm sending this email out to the main and custodian lists, and bcc'ing all of the listed maintainers for platforms that have a problem here. The migration deadline for switching from CONFIG_SERIAL to CONFIG_DM_SERIAL is the v2023.04 release. Now, per how I've behaved in the past, I'm not going to immediately remove these platforms. But it would be very good to jump on migrating them now, rather than waiting further. The full list (at least in so far as our Makefile check can determine) is: SBx81LIFKW SBx81LIFXCAT pogo_e02 pogo_v4 dns325 iconnect d2net_v2 net2big_v2 inetspace_v2 netspace_lite_v2 netspace_max_v2 netspace_mini_v2 netspace_v2 dreamplug guruplug openrd_base openrd_client openrd_ultimate sheevaplug ib62x0 dockstar goflexhome nas220 ds109 nsa310s mx23evk mx28evk imx28_xea imx28_xea_sb mx23_olinuxino vexpress_ca9x4 am43xx_evm_qspiboot am43xx_hs_evm_qspi ti816x_evm vinco bcm7260 bcm7445 ls1021aiot_qspi ls1021aiot_sdcard ls1021aqds_nand ls1021aqds_nor_SECURE_BOOT ls1021aqds_qspi ls1021aqds_sdcard_ifc ls1021aqds_sdcard_qspi ls1021atsn_qspi ls1021atsn_sdcard ls1021atwr_nor_SECURE_BOOT ls1021atwr_qspi ls1021atwr_sdcard_ifc ls1021atwr_sdcard_ifc_SECURE_BOOT ls1021atwr_sdcard_qspi mx51evk mx53loco usbarmory m53menlo udoo wandboard mx6qsabrelite nitrogen6dl nitrogen6dl2g nitrogen6q nitrogen6q2g nitrogen6s nitrogen6s1g imx6dl_mamoj dh_imx6 marsboard riotboard imx6dl_icore_nand imx6q_icore_nand imx6qdl_icore_mipi imx6qdl_icore_mmc imx6qdl_icore_nand imx6qdl_icore_rqs imx6ul_geam_mmc imx6ul_geam_nand imx6ul_isiot_emmc imx6ul_isiot_nand mx6memcal
We should take care of engicam boards. I will ask jagan if we have all of them
As you're the first person to speak up about an i.MX family of boards, this is one of the cases where I really would like to see a solution at the SoC level. I hope there's not a reason that all imx6* can't just enable DM_SERIAL at this point. I really want to hope imx* can enable it, but it certainly needs to be sanity tested throughout the families.
But yes, starting with moving all of the engicam boards over is better than not moving anything over, and I do understand not everyone is comfortable making wide sweeping changes they can't also test.
Well, I said that will help with this. I will check it out later. Last time on imx8mn, We drop few lines of code and rework the code in the board itself. I need to run some test
Great, thanks!