Re: [U-Boot] [PATCH] [v3] powerpc: add support for the Freescale P1022DS reference board

Dear Timur Tabi,

In message 1276547304-10105-1-git-send-email-timur@freescale.com you wrote:

Add basic suport for the Freescale P1022DS reference board.

Specifics:

1. 36-bit only
2. Booting from NOR flash only
3. Environment stored in NOR flash only
4. No SPI support

...

+int checkboard(void) +{

• u8 sw;
• puts("Board: P1022DS ");
• printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",

• in_8(&pixis->id), in_8(&pixis->arch), in_8(&pixis->scver));
  

• sw = in_8(&PIXIS_SW(PIXIS_LBMAP_SWITCH));
• switch ((sw & PIXIS_LBMAP_MASK) >> 6) {

• case 0:
  

• 	printf ("vBank: %u\n", ((sw & 0x30) >> 4));
  

• 	break;
  

• case 1:
  

• 	printf ("NAND\n");
  

• 	break;
  

• case 2:
  

• case 3:
  

• 	puts ("Promjet\n");
  

• 	break;
  

• }

Incorrect indentation.

Best regards,

Wolfgang Denk