This patch adds support for the Armada XP (MV78260) based theadorable board. Its equipped with onboard DDR3, UART, ethernet, I2C, SPI NOR, LCD and SATA (SSD) interfaces / devices.
Two defconfigs are added:
theadorable_defconfig: The production U-Boot version with a stripped down drivers and feature list. This removes networking, USB and PCI support.
theadorable_debug_defconfig: The debugging / testing U-Boot version with full support for all drivers.
Signed-off-by: Stefan Roese sr@denx.de Cc: Luka Perkov luka.perkov@sartura.hr --- arch/arm/dts/Makefile | 3 +- arch/arm/dts/armada-xp-theadorable.dts | 143 +++++++++++++++++++++++++++ arch/arm/mach-mvebu/Kconfig | 6 ++ board/theadorable/MAINTAINERS | 7 ++ board/theadorable/Makefile | 7 ++ board/theadorable/kwbimage.cfg | 12 +++ board/theadorable/theadorable.c | 171 +++++++++++++++++++++++++++++++++ configs/theadorable_debug_defconfig | 28 ++++++ configs/theadorable_defconfig | 26 +++++ include/configs/theadorable.h | 170 ++++++++++++++++++++++++++++++++ 10 files changed, 572 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/armada-xp-theadorable.dts create mode 100644 board/theadorable/MAINTAINERS create mode 100644 board/theadorable/Makefile create mode 100644 board/theadorable/kwbimage.cfg create mode 100644 board/theadorable/theadorable.c create mode 100644 configs/theadorable_debug_defconfig create mode 100644 configs/theadorable_defconfig create mode 100644 include/configs/theadorable.h
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index e4f8aae..9b933ac 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -52,7 +52,8 @@ dtb-$(CONFIG_ARCH_MVEBU) += \ armada-388-gp.dtb \ armada-xp-gp.dtb \ armada-xp-maxbcm.dtb \ - armada-xp-synology-ds414.dtb + armada-xp-synology-ds414.dtb \ + armada-xp-theadorable.dtb
dtb-$(CONFIG_ARCH_UNIPHIER) += \ uniphier-ph1-ld4-ref.dtb \ diff --git a/arch/arm/dts/armada-xp-theadorable.dts b/arch/arm/dts/armada-xp-theadorable.dts new file mode 100644 index 0000000..cf1be2a --- /dev/null +++ b/arch/arm/dts/armada-xp-theadorable.dts @@ -0,0 +1,143 @@ +/* + * Device Tree file for Marvell Armada XP theadorable board + * + * Copyright (C) 2013-2014 Marvell + * + * Lior Amsalem alior@marvell.com + * Gregory CLEMENT gregory.clement@free-electrons.com + * Thomas Petazzoni thomas.petazzoni@free-electrons.com + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Note: this Device Tree assumes that the bootloader has remapped the + * internal registers to 0xf1000000 (instead of the default + * 0xd0000000). The 0xf1000000 is the default used by the recent, + * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier + * boards were delivered with an older version of the bootloader that + * left internal registers mapped at 0xd0000000. If you are in this + * situation, you should either update your bootloader (preferred + * solution) or the below Device Tree should be adjusted. + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include "armada-xp-mv78260.dtsi" + +/ { + model = "Marvell Armada XP theadorable"; + compatible = "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + spi0 = &spi0; + ethernet0 = ð0; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x80000000>; + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 + MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>; + + internal-regs { + serial@12000 { + status = "okay"; + u-boot,dm-pre-reloc; + }; + + serial@12100 { + status = "okay"; + }; + + serial@12200 { + status = "okay"; + }; + + serial@12300 { + status = "okay"; + }; + + sata@a0000 { + nr-ports = <2>; + status = "okay"; + }; + + mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + + ethernet@70000 { + status = "okay"; + phy = <&phy0>; + phy-mode = "sgmii"; + }; + + usb@50000 { + status = "okay"; + }; + + usb@51000 { + status = "okay"; + }; + + spi0: spi@10600 { + status = "okay"; + u-boot,dm-pre-reloc; + + spi-flash@0 { + u-boot,dm-pre-reloc; + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q128a13", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <27777777>; + }; + }; + }; + }; +}; diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index b962846..96a3313 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -46,6 +46,10 @@ config TARGET_MAXBCM bool "Support maxbcm" select MV78460
+config TARGET_THEADORABLE + bool "Support theadorable Armada XP" + select MV78260 + endchoice
config SYS_BOARD @@ -54,6 +58,7 @@ config SYS_BOARD default "db-mv784mp-gp" if TARGET_DB_MV784MP_GP default "ds414" if TARGET_DS414 default "maxbcm" if TARGET_MAXBCM + default "theadorable" if TARGET_THEADORABLE
config SYS_CONFIG_NAME default "clearfog" if TARGET_CLEARFOG @@ -61,6 +66,7 @@ config SYS_CONFIG_NAME default "db-mv784mp-gp" if TARGET_DB_MV784MP_GP default "ds414" if TARGET_DS414 default "maxbcm" if TARGET_MAXBCM + default "theadorable" if TARGET_THEADORABLE
config SYS_VENDOR default "Marvell" if TARGET_DB_MV784MP_GP diff --git a/board/theadorable/MAINTAINERS b/board/theadorable/MAINTAINERS new file mode 100644 index 0000000..5ae6b64 --- /dev/null +++ b/board/theadorable/MAINTAINERS @@ -0,0 +1,7 @@ +THEADORABLE BOARD +M: Stefan Roese sr@denx.de +S: Maintained +F: board/theadorable/ +F: include/configs/theadorable.h +F: configs/theadorable_debug_defconfig +F: configs/theadorable_defconfig diff --git a/board/theadorable/Makefile b/board/theadorable/Makefile new file mode 100644 index 0000000..9d5b39e --- /dev/null +++ b/board/theadorable/Makefile @@ -0,0 +1,7 @@ +# +# Copyright (C) 2015-2016 Stefan Roese sr@denx.de +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := theadorable.o diff --git a/board/theadorable/kwbimage.cfg b/board/theadorable/kwbimage.cfg new file mode 100644 index 0000000..4f3b7b2 --- /dev/null +++ b/board/theadorable/kwbimage.cfg @@ -0,0 +1,12 @@ +# +# Copyright (C) 2015-2016 Stefan Roese sr@denx.de +# + +# Armada XP uses version 1 image format +VERSION 1 + +# Boot Media configurations +BOOT_FROM spi + +# Binary Header (bin_hdr) with DDR3 training code +BINARY spl/u-boot-spl-dtb.bin 0000005b 00000068 diff --git a/board/theadorable/theadorable.c b/board/theadorable/theadorable.c new file mode 100644 index 0000000..0e23265 --- /dev/null +++ b/board/theadorable/theadorable.c @@ -0,0 +1,171 @@ +/* + * Copyright (C) 2015-2016 Stefan Roese sr@denx.de + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> +#ifdef CONFIG_NET +#include <netdev.h> +#endif + +#include "../drivers/ddr/marvell/axp/ddr3_hw_training.h" +#include "../arch/arm/mach-mvebu/serdes/axp/high_speed_env_spec.h" + +DECLARE_GLOBAL_DATA_PTR; + +#define THEADORABLE_GPP_OUT_ENA_LOW 0x00336780 +#define THEADORABLE_GPP_OUT_ENA_MID 0x00003cf0 +#define THEADORABLE_GPP_OUT_ENA_HIGH (~(0x0)) + +#define THEADORABLE_GPP_OUT_VAL_LOW 0x2c0c983f +#define THEADORABLE_GPP_OUT_VAL_MID 0x0007000c +#define THEADORABLE_GPP_OUT_VAL_HIGH 0x00000000 + +/* DDR3 static configuration */ +static MV_DRAM_MC_INIT ddr3_theadorable[MV_MAX_DDR3_STATIC_SIZE] = { + {0x00001400, 0x7301ca28}, /* DDR SDRAM Configuration Register */ + {0x00001404, 0x30000800}, /* Dunit Control Low Register */ + {0x00001408, 0x44149887}, /* DDR SDRAM Timing (Low) Register */ + {0x0000140C, 0x38d93fc7}, /* DDR SDRAM Timing (High) Register */ + {0x00001410, 0x1b100001}, /* DDR SDRAM Address Control Register */ + {0x00001424, 0x0000f3ff}, /* Dunit Control High Register */ + {0x00001428, 0x000f8830}, /* ODT Timing (Low) Register */ + {0x0000142C, 0x014c50f4}, /* DDR3 Timing Register */ + {0x0000147C, 0x0000c671}, /* ODT Timing (High) Register */ + + {0x00001494, 0x00010000}, /* DDR SDRAM ODT Control (Low) Reg */ + {0x0000149C, 0x00000001}, /* DDR Dunit ODT Control Register */ + {0x000014A0, 0x00000001}, /* DRAM FIFO Control Register */ + {0x000014A8, 0x00000101}, /* AXI Control Register */ + + /* + * DO NOT Modify - Open Mbus Window - 2G - Mbus is required for the + * training sequence + */ + {0x000200e8, 0x3fff0e01}, + {0x00020184, 0x3fffffe0}, /* Close fast path Window to - 2G */ + + {0x0001504, 0x7fffffe1}, /* CS0 Size */ + {0x000150C, 0x00000000}, /* CS1 Size */ + {0x0001514, 0x00000000}, /* CS2 Size */ + {0x000151C, 0x00000000}, /* CS3 Size */ + + {0x00020220, 0x00000007}, /* Reserved */ + + {0x00001538, 0x00000009}, /* Read Data Sample Delays Register */ + {0x0000153C, 0x00000009}, /* Read Data Ready Delay Register */ + + {0x000015D0, 0x00000650}, /* MR0 */ + {0x000015D4, 0x00000044}, /* MR1 */ + {0x000015D8, 0x00000010}, /* MR2 */ + {0x000015DC, 0x00000000}, /* MR3 */ + {0x000015E0, 0x00000001}, + {0x000015E4, 0x00203c18}, /* ZQDS Configuration Register */ + {0x000015EC, 0xf800a225}, /* DDR PHY */ + + /* Recommended Settings from Marvell for 4 x 16 bit devices: */ + {0x000014C0, 0x192424c9}, /* DRAM addr and Ctrl Driving Strenght*/ + {0x000014C4, 0x0aaa24c9}, /* DRAM Data and DQS Driving Strenght */ + + {0x0, 0x0} +}; + +static MV_DRAM_MODES board_ddr_modes[MV_DDR3_MODES_NUMBER] = { + {"theadorable_1333-667", 0x3, 0x5, 0x0, A0, ddr3_theadorable, NULL}, +}; + +extern MV_SERDES_CHANGE_M_PHY serdes_change_m_phy[]; + +/* + * Lane0 - PCIE0.0 X1 (to WIFI Module) + * Lane5 - SATA0 + * Lane6 - SATA1 + * Lane7 - SGMII0 (to Ethernet Phy) + * Lane8-11 - PCIE2.0 X4 (to PEX Switch) + * all other lanes are disabled + */ +MV_BIN_SERDES_CFG theadorable_serdes_cfg[] = { + { MV_PEX_ROOT_COMPLEX, 0x22200001, 0x00001111, + { PEX_BUS_MODE_X1, PEX_BUS_DISABLED, PEX_BUS_MODE_X4, + PEX_BUS_DISABLED }, + 0x0060, serdes_change_m_phy + }, +}; + +MV_DRAM_MODES *ddr3_get_static_ddr_mode(void) +{ + /* Only one mode supported for this board */ + return &board_ddr_modes[0]; +} + +MV_BIN_SERDES_CFG *board_serdes_cfg_get(u8 pex_mode) +{ + return &theadorable_serdes_cfg[0]; +} + +int board_early_init_f(void) +{ + /* Configure MPP */ + writel(0x00000000, MVEBU_MPP_BASE + 0x00); + writel(0x03300000, MVEBU_MPP_BASE + 0x04); + writel(0x00000033, MVEBU_MPP_BASE + 0x08); + writel(0x00000000, MVEBU_MPP_BASE + 0x0c); + writel(0x11110000, MVEBU_MPP_BASE + 0x10); + writel(0x00221100, MVEBU_MPP_BASE + 0x14); + writel(0x00000000, MVEBU_MPP_BASE + 0x18); + writel(0x00000000, MVEBU_MPP_BASE + 0x1c); + writel(0x00000000, MVEBU_MPP_BASE + 0x20); + + /* Configure GPIO */ + writel(THEADORABLE_GPP_OUT_VAL_LOW, MVEBU_GPIO0_BASE + 0x00); + writel(THEADORABLE_GPP_OUT_ENA_LOW, MVEBU_GPIO0_BASE + 0x04); + writel(THEADORABLE_GPP_OUT_VAL_MID, MVEBU_GPIO1_BASE + 0x00); + writel(THEADORABLE_GPP_OUT_ENA_MID, MVEBU_GPIO1_BASE + 0x04); + writel(THEADORABLE_GPP_OUT_VAL_HIGH, MVEBU_GPIO2_BASE + 0x00); + writel(THEADORABLE_GPP_OUT_ENA_HIGH, MVEBU_GPIO2_BASE + 0x04); + + return 0; +} + +int board_init(void) +{ + /* adress of boot parameters */ + gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100; + + return 0; +} + +int checkboard(void) +{ + puts("Board: theadorable\n"); + + return 0; +} + +#ifdef CONFIG_NET +int board_eth_init(bd_t *bis) +{ + cpu_eth_init(bis); /* Built in controller(s) come first */ + return pci_eth_init(bis); +} +#endif + +int board_video_init(void) +{ + struct mvebu_lcd_info lcd_info; + + /* Reserved memory area via CONFIG_SYS_MEM_TOP_HIDE */ + lcd_info.fb_base = gd->ram_size; + lcd_info.x_res = 240; + lcd_info.x_fp = 1; + lcd_info.x_bp = 45; + lcd_info.y_res = 320; + lcd_info.y_fp = 1; + lcd_info.y_bp = 3; + + return mvebu_lcd_register_init(&lcd_info); +} diff --git a/configs/theadorable_debug_defconfig b/configs/theadorable_debug_defconfig new file mode 100644 index 0000000..fbed23c --- /dev/null +++ b/configs/theadorable_debug_defconfig @@ -0,0 +1,28 @@ +CONFIG_ARM=y +CONFIG_ARCH_MVEBU=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_TARGET_THEADORABLE=y +CONFIG_DEFAULT_DEVICE_TREE="armada-xp-theadorable" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_SF=y +CONFIG_CMD_USB=y +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPL_OF_TRANSLATE=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_BASE=0xd0012000 +CONFIG_DEBUG_UART_CLOCK=250000000 +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYS_NS16550=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_VIDEO_MVEBU=y diff --git a/configs/theadorable_defconfig b/configs/theadorable_defconfig new file mode 100644 index 0000000..cce4669 --- /dev/null +++ b/configs/theadorable_defconfig @@ -0,0 +1,26 @@ +CONFIG_ARM=y +CONFIG_ARCH_MVEBU=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_TARGET_THEADORABLE=y +CONFIG_DEFAULT_DEVICE_TREE="armada-xp-theadorable" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_SF=y +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set +CONFIG_SPL_OF_TRANSLATE=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_BASE=0xd0012000 +CONFIG_DEBUG_UART_CLOCK=250000000 +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYS_NS16550=y +CONFIG_VIDEO_MVEBU=y +CONFIG_REGEX=y +CONFIG_LIB_RAND=y diff --git a/include/configs/theadorable.h b/include/configs/theadorable.h new file mode 100644 index 0000000..cd9d6b6 --- /dev/null +++ b/include/configs/theadorable.h @@ -0,0 +1,170 @@ +/* + * Copyright (C) 2015-2016 Stefan Roese sr@denx.de + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _CONFIG_THEADORABLE_H +#define _CONFIG_THEADORABLE_H + +/* + * High Level Configuration Options (easy to change) + */ +#define CONFIG_DISPLAY_BOARDINFO_LATE + +/* + * TEXT_BASE needs to be below 16MiB, since this area is scrubbed + * for DDR ECC byte filling in the SPL before loading the main + * U-Boot into it. + */ +#define CONFIG_SYS_TEXT_BASE 0x00800000 +#define CONFIG_SYS_TCLK 250000000 /* 250MHz */ + +/* + * Commands configuration + */ +#define CONFIG_CMD_BOOTZ +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_ENV +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_FS_GENERIC +#define CONFIG_CMD_I2C +#define CONFIG_CMD_SATA +#define CONFIG_CMD_TIME + +/* + * The debugging version enables USB support via defconfig. + * This version should also enable all other non-production + * interfaces / features. + */ +#ifdef CONFIG_USB +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_SPI +#define CONFIG_CMD_TFTPPUT +#endif + +/* I2C */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MVTWSI +#define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE +#define CONFIG_SYS_I2C_SLAVE 0x0 +#define CONFIG_SYS_I2C_SPEED 100000 + +/* USB/EHCI configuration */ +#define CONFIG_EHCI_IS_TDI +#define CONFIG_USB_MAX_CONTROLLER_COUNT 3 + +#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ + +/* SPI NOR flash default params, used by sf commands */ +#define CONFIG_SF_DEFAULT_SPEED 27777777 /* for fast SPL booting */ +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 + +/* Environment in SPI NOR flash */ +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */ +#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ +#define CONFIG_ENV_SECT_SIZE (256 << 10) /* 256KiB sectors */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_PHY_MARVELL /* there is a marvell phy */ +#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ + +#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */ +#define CONFIG_SYS_ALT_MEMTEST +#define CONFIG_PREBOOT +#define CONFIG_FIT + +#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +/* Keep device tree and initrd in lower memory so the kernel can access them */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "fdt_high=0x10000000\0" \ + "initrd_high=0x10000000\0" + +/* SATA support */ +#define CONFIG_SYS_SATA_MAX_DEVICE 1 +#define CONFIG_SATA_MV +#define CONFIG_LIBATA +#define CONFIG_LBA48 +#define CONFIG_EFI_PARTITION +#define CONFIG_DOS_PARTITION + +/* Additional FS support/configuration */ +#define CONFIG_SUPPORT_VFAT + +/* PCIe support */ +#ifdef CONFIG_CMD_PCI +#ifndef CONFIG_SPL_BUILD +#define CONFIG_PCI +#define CONFIG_PCI_MVEBU +#define CONFIG_PCI_PNP +#endif +#endif + +/* Enable LCD and reserve 512KB from top of memory*/ +#define CONFIG_SYS_MEM_TOP_HIDE 0x80000 + +#define CONFIG_VIDEO +#define CONFIG_CFB_CONSOLE +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_CMD_BMP + +/* + * mv-common.h should be defined after CMD configs since it used them + * to enable certain macros + */ +#include "mv-common.h" + +/* + * Memory layout while starting into the bin_hdr via the + * BootROM: + * + * 0x4000.4000 - 0x4003.4000 headers space (192KiB) + * 0x4000.4030 bin_hdr start address + * 0x4003.4000 - 0x4004.7c00 BootROM memory allocations (15KiB) + * 0x4007.fffc BootROM stack top + * + * The address space between 0x4007.fffc and 0x400f.fff is not locked in + * L2 cache thus cannot be used. + */ + +/* SPL */ +/* Defines for SPL */ +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_TEXT_BASE 0x40004030 +#define CONFIG_SPL_MAX_SIZE ((128 << 10) - 0x4030) + +#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10)) +#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) + +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_MALLOC_SIMPLE +#endif + +#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) +#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT + +/* SPL related SPI defines */ +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SPL_SPI_BUS 0 +#define CONFIG_SPL_SPI_CS 0 +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x1a000 +#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS + +/* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */ +#define CONFIG_DDR_FIXED_SIZE (2 << 20) /* 2GiB */ + +#endif /* _CONFIG_THEADORABLE_H */