
Hi Bin,
On 10 December 2014 at 19:55, Bin Meng bmeng.cn@gmail.com wrote:
Hi Simon,
On Thu, Dec 11, 2014 at 10:50 AM, Simon Glass sjg@chromium.org wrote:
Hi Bin,
On 10 December 2014 at 01:38, Bin Meng bmeng.cn@gmail.com wrote:
ICH 7 SPI controller only supports byte program (02h) for SST flash. Word program (ADh) is not supported.
Signed-off-by: Bin Meng bmeng.cn@gmail.com
Split from my v2 patch @ http://patchwork.ozlabs.org/patch/405753/ This needs to be applied after Jagan's new patch series: http://patchwork.ozlabs.org/patch/419154/
drivers/spi/ich.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/ich.c b/drivers/spi/ich.c index c38df08..0379444 100644 --- a/drivers/spi/ich.c +++ b/drivers/spi/ich.c @@ -141,9 +141,14 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, ich->slave.max_write_size = ctlr.databytes; ich->speed = max_hz;
/* ICH 7 SPI controller only supports array read command */
if (ctlr.ich_version == 7)
/*
* ICH 7 SPI controller only supports array read command
* and byte program command for SST flash
*/
if (ctlr.ich_version == 7) { ich->slave.op_mode_rx = SPI_OPM_RX_AS;
ich->slave.op_mode_tx = SPI_OPM_TX_BP;
} return &ich->slave;
}
1.8.2.1
This causes a build error on coreboot-x86 (SPI_OPM_TX_BP undeclared).
I think you need apply Jagan's patch series first @ http://patchwork.ozlabs.org/patch/419154/
OK, so I suppose I could apply it to x86 so long as I don't send a pull request before Jagan. But it might be better just to wait.
Regards, Simon