On Sun, Aug 02, 2020 at 11:09:06PM -0700, Bin Meng wrote:
From: Bin Meng bin.meng@windriver.com
It's better to keep all SPL related functions in the same spl.c.
Signed-off-by: Bin Meng bin.meng@windriver.com
board/sifive/fu540/fu540.c | 33 --------------------------------- board/sifive/fu540/spl.c | 33 ++++++++++++++++++++++++++++++++- 2 files changed, 32 insertions(+), 34 deletions(-)
diff --git a/board/sifive/fu540/fu540.c b/board/sifive/fu540/fu540.c index 57753ba..54e5a4c 100644 --- a/board/sifive/fu540/fu540.c +++ b/board/sifive/fu540/fu540.c @@ -13,7 +13,6 @@ #include <linux/bitops.h> #include <linux/bug.h> #include <linux/delay.h> -#include <linux/io.h> #include <misc.h> #include <spl.h> #include <asm/arch/cache.h> @@ -127,35 +126,3 @@ int board_init(void)
return 0; }
-#ifdef CONFIG_SPL -#define MODE_SELECT_REG 0x1000 -#define MODE_SELECT_QSPI 0x6 -#define MODE_SELECT_SD 0xb -#define MODE_SELECT_MASK GENMASK(3, 0)
-u32 spl_boot_device(void) -{
- u32 mode_select = readl((void *)MODE_SELECT_REG);
- u32 boot_device = mode_select & MODE_SELECT_MASK;
- switch (boot_device) {
- case MODE_SELECT_QSPI:
return BOOT_DEVICE_SPI;- case MODE_SELECT_SD:
return BOOT_DEVICE_MMC1;- default:
debug("Unsupported boot device 0x%x but trying MMC1\n",boot_device);return BOOT_DEVICE_MMC1;- }
-} -#endif
-#ifdef CONFIG_SPL_LOAD_FIT -int board_fit_config_name_match(const char *name) -{
- /* boot using first FIT config */
- return 0;
-} -#endif diff --git a/board/sifive/fu540/spl.c b/board/sifive/fu540/spl.c index 135e118..fe27316 100644 --- a/board/sifive/fu540/spl.c +++ b/board/sifive/fu540/spl.c @@ -11,11 +11,17 @@ #include <misc.h> #include <log.h> #include <linux/delay.h> +#include <linux/io.h> #include <asm/gpio.h> #include <asm/arch/gpio.h> #include <asm/arch/spl.h>
-#define GEM_PHY_RESET SIFIVE_GENERIC_GPIO_NR(0, 12) +#define GEM_PHY_RESET SIFIVE_GENERIC_GPIO_NR(0, 12)
+#define MODE_SELECT_REG 0x1000 +#define MODE_SELECT_QSPI 0x6 +#define MODE_SELECT_SD 0xb +#define MODE_SELECT_MASK GENMASK(3, 0)
int spl_board_init_f(void) { @@ -55,3 +61,28 @@ int spl_board_init_f(void)
return 0; }
+u32 spl_boot_device(void) +{
- u32 mode_select = readl((void *)MODE_SELECT_REG);
- u32 boot_device = mode_select & MODE_SELECT_MASK;
- switch (boot_device) {
- case MODE_SELECT_QSPI:
return BOOT_DEVICE_SPI;- case MODE_SELECT_SD:
return BOOT_DEVICE_MMC1;- default:
debug("Unsupported boot device 0x%x but trying MMC1\n",boot_device);return BOOT_DEVICE_MMC1;- }
+}
+#ifdef CONFIG_SPL_LOAD_FIT +int board_fit_config_name_match(const char *name) +{
- /* boot using first FIT config */
- return 0;
+}
+#endif
2.7.4
Reviewed-by: Leo Liang ycliang@andestech.com