Define input and output clock phase delays with pre-defined values.
Define arasan_sdhci_clk_data type structure and add it to priv structure and store these clock phase delays in it.
Read input and output clock phase delays from dt. If these values are not passed through dt, use pre-defined values.
Signed-off-by: Ashok Reddy Soma ashok.reddy.soma@xilinx.com Signed-off-by: Michal Simek michal.simek@xilinx.com ---
drivers/mmc/zynq_sdhci.c | 85 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 85 insertions(+)
diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c index 1c83aab84021..d3a32c98aa35 100644 --- a/drivers/mmc/zynq_sdhci.c +++ b/drivers/mmc/zynq_sdhci.c @@ -20,6 +20,12 @@ #include <zynqmp_tap_delay.h>
#define SDHCI_TUNING_LOOP_COUNT 40 +#define MMC_BANK2 0x2 + +struct arasan_sdhci_clk_data { + int clk_phase_in[MMC_TIMING_MMC_HS400 + 1]; + int clk_phase_out[MMC_TIMING_MMC_HS400 + 1]; +};
struct arasan_sdhci_plat { struct mmc_config cfg; @@ -28,12 +34,17 @@ struct arasan_sdhci_plat {
struct arasan_sdhci_priv { struct sdhci_host *host; + struct arasan_sdhci_clk_data clk_data; u8 deviceid; u8 bank; u8 no_1p8; };
#if defined(CONFIG_ARCH_ZYNQMP) +/* Default settings for ZynqMP Clock Phases */ +const u32 zynqmp_iclk_phases[] = {0, 63, 63, 0, 63, 0, 0, 183, 54, 0, 0}; +const u32 zynqmp_oclk_phases[] = {0, 72, 60, 0, 60, 72, 135, 48, 72, 135, 0}; + static const u8 mode2timing[] = { [MMC_LEGACY] = MMC_TIMING_LEGACY, [MMC_HS] = MMC_TIMING_MMC_HS, @@ -168,6 +179,79 @@ static void arasan_sdhci_set_tapdelay(struct sdhci_host *host) priv->bank); }
+static void arasan_dt_read_clk_phase(struct udevice *dev, unsigned char timing, + const char *prop) +{ + struct arasan_sdhci_priv *priv = dev_get_priv(dev); + struct arasan_sdhci_clk_data *clk_data = &priv->clk_data; + u32 clk_phase[2] = {0}; + + /* + * Read Tap Delay values from DT, if the DT does not contain the + * Tap Values then use the pre-defined values + */ + if (dev_read_u32_array(dev, prop, &clk_phase[0], 2)) { + dev_dbg(dev, "Using predefined clock phase for %s = %d %d\n", + prop, clk_data->clk_phase_in[timing], + clk_data->clk_phase_out[timing]); + return; + } + + /* The values read are Input and Output Clock Delays in order */ + clk_data->clk_phase_in[timing] = clk_phase[0]; + clk_data->clk_phase_out[timing] = clk_phase[1]; +} + +/** + * arasan_dt_parse_clk_phases - Read Tap Delay values from DT + * + * Called at initialization to parse the values of Tap Delays. + * + * @dev: Pointer to our struct udevice. + */ +static void arasan_dt_parse_clk_phases(struct udevice *dev) +{ + struct arasan_sdhci_priv *priv = dev_get_priv(dev); + struct arasan_sdhci_clk_data *clk_data = &priv->clk_data; + int i; + + if (IS_ENABLED(CONFIG_ARCH_ZYNQMP) && + device_is_compatible(dev, "xlnx,zynqmp-8.9a")) { + for (i = 0; i <= MMC_TIMING_MMC_HS400; i++) { + clk_data->clk_phase_in[i] = zynqmp_iclk_phases[i]; + clk_data->clk_phase_out[i] = zynqmp_oclk_phases[i]; + } + + if (priv->bank == MMC_BANK2) { + clk_data->clk_phase_out[MMC_TIMING_UHS_SDR104] = 90; + clk_data->clk_phase_out[MMC_TIMING_MMC_HS200] = 90; + } + } + + arasan_dt_read_clk_phase(dev, MMC_TIMING_LEGACY, + "clk-phase-legacy"); + arasan_dt_read_clk_phase(dev, MMC_TIMING_MMC_HS, + "clk-phase-mmc-hs"); + arasan_dt_read_clk_phase(dev, MMC_TIMING_SD_HS, + "clk-phase-sd-hs"); + arasan_dt_read_clk_phase(dev, MMC_TIMING_UHS_SDR12, + "clk-phase-uhs-sdr12"); + arasan_dt_read_clk_phase(dev, MMC_TIMING_UHS_SDR25, + "clk-phase-uhs-sdr25"); + arasan_dt_read_clk_phase(dev, MMC_TIMING_UHS_SDR50, + "clk-phase-uhs-sdr50"); + arasan_dt_read_clk_phase(dev, MMC_TIMING_UHS_SDR104, + "clk-phase-uhs-sdr104"); + arasan_dt_read_clk_phase(dev, MMC_TIMING_UHS_DDR50, + "clk-phase-uhs-ddr50"); + arasan_dt_read_clk_phase(dev, MMC_TIMING_MMC_DDR52, + "clk-phase-mmc-ddr52"); + arasan_dt_read_clk_phase(dev, MMC_TIMING_MMC_HS200, + "clk-phase-mmc-hs200"); + arasan_dt_read_clk_phase(dev, MMC_TIMING_MMC_HS400, + "clk-phase-mmc-hs400"); +} + static void arasan_sdhci_set_control_reg(struct sdhci_host *host) { struct mmc *mmc = (struct mmc *)host->mmc; @@ -271,6 +355,7 @@ static int arasan_sdhci_ofdata_to_platdata(struct udevice *dev)
#if defined(CONFIG_ARCH_ZYNQMP) priv->host->ops = &arasan_ops; + arasan_dt_parse_clk_phases(dev); #endif
priv->host->ioaddr = (void *)dev_read_addr(dev);