Signed-off-by: Michael Schwingen michael@schwingen.org --- board/actux2/actux2.c | 26 +++++++++++++----------- board/actux2/config.mk | 7 +---- board/actux2/u-boot.lds | 47 ++++++++++++++++++++++++++++----------------- include/configs/actux2.h | 21 +++++++++++++++---- 4 files changed, 61 insertions(+), 40 deletions(-)
diff --git a/board/actux2/actux2.c b/board/actux2/actux2.c index d6aaad6..634553f 100644 --- a/board/actux2/actux2.c +++ b/board/actux2/actux2.c @@ -43,6 +43,19 @@
DECLARE_GLOBAL_DATA_PTR;
+int board_early_init_f (void) +{ + /* CS1: IPAC-X */ + *IXP425_EXP_CS1 = 0x94d10013; + /* CS5: Debug port */ + *IXP425_EXP_CS5 = 0x9d520003; + /* CS6: HW release register */ + *IXP425_EXP_CS6 = 0x81860001; + /* CS7: LEDs */ + *IXP425_EXP_CS7 = 0x80900003; + return 0; +} + int board_init (void) { gd->bd->bi_arch_number = MACH_TYPE_ACTUX2; @@ -70,15 +83,6 @@ int board_init (void) GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_EXTBUS_CLK); *IXP425_GPIO_GPCLKR = 0x011001FF;
- /* CS1: IPAC-X */ - *IXP425_EXP_CS1 = 0x94d10013; - /* CS5: Debug port */ - *IXP425_EXP_CS5 = 0x9d520003; - /* CS6: HW release register */ - *IXP425_EXP_CS6 = 0x81860001; - /* CS7: LEDs */ - *IXP425_EXP_CS7 = 0x80900003; - udelay (533); GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_IORST); GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_ETHRST); @@ -112,9 +116,7 @@ int checkboard (void)
int dram_init (void) { - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - + gd->ram_size = PHYS_SDRAM_1_SIZE; return (0); }
diff --git a/board/actux2/config.mk b/board/actux2/config.mk index 88634f7..a370337 100644 --- a/board/actux2/config.mk +++ b/board/actux2/config.mk @@ -1,6 +1,3 @@ -CONFIG_SYS_TEXT_BASE = 0x00e00000 - -# include NPE ethernet driver -BOARDLIBS = arch/arm/cpu/ixp/npe/libnpe.o - LDSCRIPT := $(SRCTREE)/board/$(BOARDDIR)/u-boot.lds +PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections +PLATFORM_LDFLAGS += --gc-sections diff --git a/board/actux2/u-boot.lds b/board/actux2/u-boot.lds index 707c027..f3473a3 100644 --- a/board/actux2/u-boot.lds +++ b/board/actux2/u-boot.lds @@ -30,34 +30,29 @@ SECTIONS
. = ALIGN (4); .text : { - arch/arm/cpu/ixp/start.o(.text) - lib/string.o(.text) - lib/vsprintf.o(.text) - arch/arm/lib/board.o(.text) - common/dlmalloc.o(.text) - arch/arm/cpu/ixp/cpu.o(.text) + arch/arm/cpu/ixp/start.o(.text*) + net/libnet.o(.text*) + board/actux2/libactux2.o(.text*) + arch/arm/cpu/ixp/libixp.o(.text*) + drivers/serial/libserial.o(.text*)
. = env_offset; - common/env_embedded.o (.ppcenv) - - * (.text) + common/env_embedded.o(.ppcenv) + *(.text*) }
. = ALIGN (4); .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } - . = ALIGN (4); .data : { - *(.data) + *(.data*) } - . = ALIGN (4); .got : { *(.got) } - . =.; __u_boot_cmd_start =.; .u_boot_cmd : { @@ -66,10 +61,26 @@ SECTIONS __u_boot_cmd_end =.;
. = ALIGN (4); - __bss_start =.; - .bss (NOLOAD): { - *(.bss) - . = ALIGN(4); + .rel.dyn : { + __rel_dyn_start = .; + *(.rel*) + __rel_dyn_end = .; + } + + .dynsym : { + __dynsym_start = .; + *(.dynsym) + } + + .bss __rel_dyn_start (OVERLAY) : { + __bss_start = .; + *(.bss*) + . = ALIGN(4); + _end = .; } - _end =.; + /DISCARD/ : { *(.dynstr*) } + /DISCARD/ : { *(.dynamic*) } + /DISCARD/ : { *(.plt*) } + /DISCARD/ : { *(.interp*) } + /DISCARD/ : { *(.gnu*) } } diff --git a/include/configs/actux2.h b/include/configs/actux2.h index 756279e..4ba3ce0 100644 --- a/include/configs/actux2.h +++ b/include/configs/actux2.h @@ -37,6 +37,7 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_BOOTDELAY 5 #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_BOARD_EARLY_INIT_F 1
/*************************************************************** * U-boot generic defines start here. @@ -45,7 +46,6 @@
/* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -/* size in bytes reserved for initial data */
/* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE @@ -85,8 +85,9 @@ #define CONFIG_SYS_MEMTEST_START 0x00400000 #define CONFIG_SYS_MEMTEST_END 0x00800000
-/* spec says 66.666 MHz, but it appears to be 33 */ -#define CONFIG_SYS_HZ 3333333 +/* timer clock - 2* OSC_IN system clock */ +#define CONFIG_IXP425_TIMER_CLK 66666666 +#define CONFIG_SYS_HZ 1000
/* default load address */ #define CONFIG_SYS_LOAD_ADDR 0x00010000 @@ -112,7 +113,7 @@ /* SDRAM settings */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM_1 0x00000000 -#define CONFIG_SYS_DRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_BASE 0x00000000
/* 16MB SDRAM */ #define CONFIG_SYS_SDR_CONFIG 0x3A @@ -122,6 +123,7 @@ #define CONFIG_SYS_DRAM_SIZE 0x01000000
/* FLASH organization */ +#define CONFIG_SYS_TEXT_BASE 0x50000000 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of sectors on one chip */ #define CONFIG_SYS_MAX_FLASH_SECT 140 @@ -184,13 +186,15 @@ "npe_ucode=50040000\0" \ "mtd=IXP4XX-Flash.0:256k(uboot),64k(ucode),1152k(linux),-(root)\0" \ "kerneladdr=50050000\0" \ + "kernelfile=actux2/uImage\0" \ + "rootfile=actux2/rootfs\0" \ "rootaddr=50170000\0" \ "loadaddr=10000\0" \ "updateboot_ser=mw.b 10000 ff 40000;" \ " loady ${loadaddr};" \ " run eraseboot writeboot\0" \ "updateboot_net=mw.b 10000 ff 40000;" \ - " tftp ${loadaddr} u-boot.bin;" \ + " tftp ${loadaddr} actux2/u-boot.bin;" \ " run eraseboot writeboot\0" \ "eraseboot=protect off 50000000 50003fff;" \ " protect off 50006000 5003ffff;" \ @@ -200,6 +204,9 @@ " cp.b 16000 50006000 3a000\0" \ "eraseenv=protect off 50004000 50005fff;" \ " erase 50004000 50005fff\0" \ + "updateucode=loady;" \ + " era ${npe_ucode} +${filesize};" \ + " cp.b ${loadaddr} ${npe_ucode} ${filesize}\0" \ "updateroot=tftp ${loadaddr} ${rootfile};" \ " era ${rootaddr} +${filesize};" \ " cp.b ${loadaddr} ${rootaddr} ${filesize}\0" \ @@ -218,4 +225,8 @@ " tftpboot ${loadaddr} ${kernelfile};" \ " bootm\0"
+/* additions for new relocation code, must be added to all boards */ +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) + #endif /* __CONFIG_H */