From: Jamie Lentin jm@lentin.co.uk
Neither device makes any use of the SD reader functionalty, so as suggested by Stefan Herbrechtsmeier, set the pins to GPIO instead to make this more obvious. Label MPP10 & MPP11's use whilst here.
Signed-off-by: Jamie Lentin jm@lentin.co.uk Cc: Prafulla Wadaskar prafulla@marvell.com Cc: Jamie Lentin jm@lentin.co.uk Cc: Albert ARIBAUD albert.u.boot@aribaud.net Cc: Stefan Herbrechtsmeier stefan@code.herbrechtsmeier.net
--- board/d-link/dnskw/dnskw.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/board/d-link/dnskw/dnskw.c b/board/d-link/dnskw/dnskw.c index a9fa9a2..90cb92e 100644 --- a/board/d-link/dnskw/dnskw.c +++ b/board/d-link/dnskw/dnskw.c @@ -39,14 +39,14 @@ int board_early_init_f(void) MPP7_GPO, MPP8_TW_SDA, MPP9_TW_SCK, - MPP10_UART0_TXD, - MPP11_UART0_RXD, - MPP12_SD_CLK, + MPP10_UART0_TXD, /* 5 pin ...*/ + MPP11_UART0_RXD, /* ... console header */ + MPP12_GPO, MPP13_UART1_TXD, /* Custom ...*/ MPP14_UART1_RXD, /* ... controller */ - MPP15_SD_D1, - MPP16_SD_D2, - MPP17_SD_D3, + MPP15_GPIO, + MPP16_GPIO, + MPP17_GPIO, MPP18_NF_IO0, MPP19_NF_IO1, MPP20_SATA1_ACTn, /* sata1(left) status led */