On Sat, Feb 26, 2022 at 10:13 AM Adam Ford aford173@gmail.com wrote:
The ethernet controller is DM compliant, and the device tree defines it. There is no need to manually handle pulling the ethernet out of reset.
Signed-off-by: Adam Ford aford173@gmail.com
diff --git a/board/logicpd/am3517evm/am3517evm.c b/board/logicpd/am3517evm/am3517evm.c index f014165928..e787441c74 100644 --- a/board/logicpd/am3517evm/am3517evm.c +++ b/board/logicpd/am3517evm/am3517evm.c @@ -117,17 +117,10 @@ static void am3517_evm_musb_init(void) */ int misc_init_r(void) {
u32 reset;omap_die_id_display(); am3517_evm_musb_init();/* ensure that the Ethernet module is out of reset */reset = readl(AM3517_IP_SW_RESET);reset &= (~CPGMACSS_SW_RST);writel(reset, AM3517_IP_SW_RESET);return 0;}
@@ -142,7 +135,6 @@ void set_muxconf_regs(void) MUX_AM3517EVM(); }
#if defined(CONFIG_USB_ETHER) && defined(CONFIG_USB_MUSB_GADGET) int board_eth_init(struct bd_info *bis) { -- 2.34.1
Ethernet continues to work on AM3517 Zoom eXperimenter.
Tested-by: Derald D. Woods woods.technical@gmail.com