On 5/1/20 7:48 PM, Frank Wunderlich wrote:
Gesendet: Freitag, 01. Mai 2020 um 17:39 Uhr Von: "Marek Vasut" marex@denx.de Build failed, please fix: https://gitlab.denx.de/u-boot/custodians/u-boot-usb/pipelines/3054
could you try if all tests passing after this Patch?
regards Frank
commit 9c4a3633e92dbcd51aa60ff14693adc900e3c816 Author: Frank Wunderlich frank-w@public-files.de Date: Fri May 1 19:32:12 2020 +0200
fix build-error for xilinx-board caused by xhci-Patches Fixes: "usb: dwc3: use the phy bulk API to get phys"diff --git a/drivers/usb/host/xhci-dwc3.c b/drivers/usb/host/xhci-dwc3.c index 9fcfa39d4b..563db1a426 100644 --- a/drivers/usb/host/xhci-dwc3.c +++ b/drivers/usb/host/xhci-dwc3.c @@ -19,8 +19,7 @@ #include <linux/usb/otg.h>
struct xhci_dwc3_platdata {
struct phy *usb_phys;int num_phys;
struct phy_bulk *usb_phys;};
void dwc3_set_mode(struct dwc3 *dwc3_reg, u32 mode) @@ -125,7 +124,7 @@ static int xhci_dwc3_probe(struct udevice *dev) hcor = (struct xhci_hcor *)((uintptr_t)hccr + HC_LENGTH(xhci_readl(&(hccr)->cr_capbase)));
ret = dwc3_setup_phy(dev, &plat->usb_phys, &plat->num_phys);
ret = dwc3_setup_phy(dev, plat->usb_phys); if (ret && (ret != -ENOTSUPP)) return ret;@@ -168,7 +167,7 @@ static int xhci_dwc3_remove(struct udevice *dev) { struct xhci_dwc3_platdata *plat = dev_get_platdata(dev);
dwc3_shutdown_phy(dev, plat->usb_phys, plat->num_phys);
dwc3_shutdown_phy(dev, plat->usb_phys); return xhci_deregister(dev);}
It's a build failure, build it for versal_virt and see if the error is gone. Is it ?