Considering for u-boot-arm, unless another ARM custodian wants it?
Regards
Peter
-----Original Message----- From: Pieter Voorthuijsen [mailto:pieter.voorthuijsen@Prodrive.nl] Sent: 20 March 2008 11:29 To: u-boot-users@lists.sourceforge.net Cc: Peter Pearse Subject: [PATCH 2/2] DM644x: This adds support for the Prodrive PMDRA board, based on a DM6441
Hello,
This patch adds support for the new Prodrive PMDR-A board. It is based on the DaVinci DM6441 processor, has 256M DDR2, 8M NOR and 256M of NAND. (This requires the previous patch that removes board specific code from /cpu/arm926ejs/davinci)
Best regards, Pieter
Signed-off-by: Pieter Voorthuijsen pieter.voorthuijsen@prodrive.nl
Makefile | 3 + board/prodrive/pmdra/Makefile | 52 ++++++++++ board/prodrive/pmdra/board_init.S | 34 +++++++ board/prodrive/pmdra/config.mk | 39 ++++++++ board/prodrive/pmdra/pmdra.c | 192 +++++++++++++++++++++++++++++++++++++ board/prodrive/pmdra/u-boot.lds | 52 ++++++++++ include/configs/pmdra.h | 184 +++++++++++++++++++++++++++++++++++ 7 files changed, 556 insertions(+), 0 deletions(-) create mode 100644 board/prodrive/pmdra/Makefile create mode 100644 board/prodrive/pmdra/board_init.S create mode 100644 board/prodrive/pmdra/config.mk create mode 100644 board/prodrive/pmdra/pmdra.c create mode 100644 board/prodrive/pmdra/u-boot.lds create mode 100644 include/configs/pmdra.h
diff --git a/Makefile b/Makefile index 4fde699..77f3d24 100644 --- a/Makefile +++ b/Makefile @@ -2375,6 +2375,9 @@ davinci_schmoogie_config : unconfig davinci_sonata_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci
+pmdra_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs pmdra prodrive davinci
omap1610inn_config \ omap1610inn_cs0boot_config \ omap1610inn_cs3boot_config \ diff --git a/board/prodrive/pmdra/Makefile b/board/prodrive/pmdra/Makefile new file mode 100644 index 0000000..918c7b0 --- /dev/null +++ b/board/prodrive/pmdra/Makefile @@ -0,0 +1,52 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net # # See file +CREDITS for list of people who contributed to this # project. +# +# This program is free software; you can redistribute it and/or # +modify it under the terms of the GNU General Public License as # +published by the Free Software Foundation; either version 2 of # the +License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, # but +WITHOUT ANY WARRANTY; without even the implied warranty of # +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU +General Public License for more details. +# +# You should have received a copy of the GNU General Public License # +along with this program; if not, write to the Free Software # +Foundation, Inc., 59 Temple Place, Suite 330, Boston, # MA 02111-1307 +USA #
+include $(TOPDIR)/config.mk
+LIB = $(obj)lib$(BOARD).a
+COBJS := pmdra.o +SOBJS := board_init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS))
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+clean:
- rm -f $(SOBJS) $(OBJS)
+distclean: clean
- rm -f $(LIB) core *.bak *~ .depend
+############################################################# ########## ## +# This is for $(obj).depend target +include $(SRCTREE)/rules.mk
+sinclude $(obj).depend
+############################################################# ########## ## diff --git a/board/prodrive/pmdra/board_init.S b/board/prodrive/pmdra/board_init.S new file mode 100644 index 0000000..6cc2e86 --- /dev/null +++ b/board/prodrive/pmdra/board_init.S @@ -0,0 +1,34 @@ +/*
- Copyright (C) 2008 Prodrive B.V.
- Board-specific low level initialization code. Called at
the very end
- of cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is
no
- initialization required.
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- */
+/* This code sets up the timing params for EMIF CE2 and CE3 which
- connect to NOR and NAND flash
- */
+#include <config.h>
+.globl dv_board_init +dv_board_init:
- mov pc, lr
diff --git a/board/prodrive/pmdra/config.mk b/board/prodrive/pmdra/config.mk new file mode 100644 index 0000000..aa89d0e --- /dev/null +++ b/board/prodrive/pmdra/config.mk @@ -0,0 +1,39 @@ +# +# (C) Copyright 2002 +# Gary Jennejohn, DENX Software Engineering, gj@denx.de # David +Mueller, ELSOFT AG, d.mueller@elsoft.ch # # (C) Copyright 2003 # +Texas Instruments, <www.ti.com> # Swaminathan swami.iyer@ti.com # # +Davinci EVM board (ARM925EJS) cpu # see http://www.ti.com/ for more +information on Texas Instruments # # Davinci EVM has 1 bank of 256 MB +DDR RAM # Physical Address: +# 8000'0000 to 9000'0000 +# +# Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net # # Visioneering +Corp. Sonata board (ARM926EJS) cpu # # Sonata board has 1 bank of 128 +MB DDR RAM # Physical Address: +# 8000'0000 to 8800'0000 +# +# Razorstream, LLC. SCHMOOGIE board (ARM926EJS) cpu # # Schmoogie board +has 1 bank of 128 MB DDR RAM # Physical Address: +# 8000'0000 to 8800'0000 +# +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 # (mem +base + reserved) # # we load ourself to 8108 '0000 # #
+#Provide at least 16MB spacing between us and the Linux Kernel image +TEXT_BASE = 0x81080000 diff --git a/board/prodrive/pmdra/pmdra.c b/board/prodrive/pmdra/pmdra.c new file mode 100644 index 0000000..348ba47 --- /dev/null +++ b/board/prodrive/pmdra/pmdra.c @@ -0,0 +1,192 @@ +/*
- Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net
- Parts are shamelessly stolen from various TI sources, original
copyright
- follows:
- Copyright (C) 2004 Texas Instruments.
- This program is free software; you can redistribute it
and/or modify
- it under the terms of the GNU General Public License as
published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
+#include <common.h> +#include <i2c.h> +#include <asm/arch/hardware.h> +#include <asm/arch/emac_defs.h>
+#define MACH_TYPE_DAVINCI_EVM 901
+DECLARE_GLOBAL_DATA_PTR;
+extern void i2c_init(int speed, int slaveaddr); +extern void timer_init(void); +extern int eth_hw_init(void); +extern phy_t phy;
+/* Works on Always On power domain only (no PD argument) */ void +lpsc_on(unsigned int id) {
- dv_reg_p mdstat, mdctl;
- if (id >= DAVINCI_LPSC_GEM)
return; /* Don't work on DSP PowerDomain */
- mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4));
- mdctl = REG_P(PSC_MDCTL_BASE + (id * 4));
- while (REG(PSC_PTSTAT) & 0x01) {;}
- if ((*mdstat & 0x1f) == 0x03)
return; /* Already on and enabled */- *mdctl |= 0x03;
- /* Special treatment for some modules as for sprue14 p.7.4.2 */
- if ( (id == DAVINCI_LPSC_VPSSSLV) ||
(id == DAVINCI_LPSC_EMAC) ||(id == DAVINCI_LPSC_EMAC_WRAPPER) ||(id == DAVINCI_LPSC_MDIO) ||(id == DAVINCI_LPSC_USB) ||(id == DAVINCI_LPSC_ATA) ||(id == DAVINCI_LPSC_VLYNQ) ||(id == DAVINCI_LPSC_UHPI) ||(id == DAVINCI_LPSC_DDR_EMIF) ||(id == DAVINCI_LPSC_AEMIF) ||(id == DAVINCI_LPSC_MMC_SD) ||(id == DAVINCI_LPSC_MEMSTICK) ||(id == DAVINCI_LPSC_McBSP) ||(id == DAVINCI_LPSC_GPIO))*mdctl |= 0x200;- REG(PSC_PTCMD) = 0x01;
- while (REG(PSC_PTSTAT) & 0x03) {;}
- while ((*mdstat & 0x1f) != 0x03) {;} /* Probably an
overkill... */ +}
+void dsp_on(void) +{
- int i;
- if (REG(PSC_PDSTAT1) & 0x1f)
return; /* Already on */- REG(PSC_GBLCTL) |= 0x01;
- REG(PSC_PDCTL1) |= 0x01;
- REG(PSC_PDCTL1) &= ~0x100;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) |= 0x03;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) &= 0xfffffeff;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) |= 0x03;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) &= 0xfffffeff;
- REG(PSC_PTCMD) = 0x02;
- for (i = 0; i < 100; i++) {
if (REG(PSC_EPCPR) & 0x02)break;- }
- REG(PSC_CHP_SHRTSW) = 0x01;
- REG(PSC_PDCTL1) |= 0x100;
- REG(PSC_EPCCR) = 0x02;
- for (i = 0; i < 100; i++) {
if (!(REG(PSC_PTSTAT) & 0x02))break;- }
- REG(PSC_GBLCTL) &= ~0x1f;
+}
+int board_init(void) +{
- /* arch number of the board */
- gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_EVM;
- /* address of boot parameters */
- gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
- /* Workaround for TMS320DM6446 errata 1.3.22 */
- REG(PSC_SILVER_BULLET) = 0;
- /* Power on required peripherals */
- lpsc_on(DAVINCI_LPSC_EMAC);
- lpsc_on(DAVINCI_LPSC_EMAC_WRAPPER);
- lpsc_on(DAVINCI_LPSC_MDIO);
- lpsc_on(DAVINCI_LPSC_I2C);
- lpsc_on(DAVINCI_LPSC_UART0);
- lpsc_on(DAVINCI_LPSC_UART2);
- lpsc_on(DAVINCI_LPSC_TIMER1);
- lpsc_on(DAVINCI_LPSC_GPIO);
- /* Powerup the DSP */
- dsp_on();
- /* Bringup UART0 and 2 out of reset */
+// REG(UART0_PWREMU_MGMT) = 0x0000e003; /* Why does TI use reserved bits or bit that MUST be set to 0? */
- REG(UART0_PWREMU_MGMT) = 0x00006001;
- REG(UART2_PWREMU_MGMT) = 0x00006001;
- /* Enable GIO3.3V cells used for EMAC */
- REG(VDD3P3V_PWDN) = 0;
- /* Enable UART0 and 2 MUX lines */
- REG(PINMUX1) |= 1; //(0)
- REG(PINMUX1) |= 4; //(2)
- /* Enable EMAC and AEMIF pins */
- REG(PINMUX0) = 0x80000c1f;
- /* Enable I2C pin Mux */
- REG(PINMUX1) |= (1 << 7);
- /* Set the Bus Priority Register to appropriate value */
- REG(VBPR) = 0x20;
- timer_init();
- return(0);
+}
+int misc_init_r (void) +{
- int clk = 0;
- clk = ((REG(PLL2_PLLM) + 1) * 27) / ((REG(PLL2_DIV2) & 0x1f) +
1);
- printf ("ARM Clock : %dMHz\n", ((REG(PLL1_PLLM) + 1) * 27 ) /
2);
- printf ("DDR Clock : %dMHz\n", (clk / 2));
- if (!eth_hw_init()) {
printf("ethernet init failed!\n");- } else {
printf("ETH PHY : %s\n", phy.name);- }
- return(0);
+}
+int dram_init(void) +{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
- return(0);
+} diff --git a/board/prodrive/pmdra/u-boot.lds b/board/prodrive/pmdra/u-boot.lds new file mode 100644 index 0000000..710b2a2 --- /dev/null +++ b/board/prodrive/pmdra/u-boot.lds @@ -0,0 +1,52 @@ +/*
- (C) Copyright 2002
- Gary Jennejohn, DENX Software Engineering, gj@denx.de
- See file CREDITS for list of people who contributed to this
- project.
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- */
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{
- . = 0x00000000;
- . = ALIGN(4);
- .text :
- {
cpu/arm926ejs/start.o (.text)*(.text)- }
- . = ALIGN(4);
- .rodata : { *(.rodata) }
- . = ALIGN(4);
- .data : { *(.data) }
- . = ALIGN(4);
- .got : { *(.got) }
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
- . = ALIGN(4);
- __bss_start = .;
- .bss : { *(.bss) }
- _end = .;
+} diff --git a/include/configs/pmdra.h b/include/configs/pmdra.h new file mode 100644 index 0000000..d6b3456 --- /dev/null +++ b/include/configs/pmdra.h @@ -0,0 +1,184 @@ +/*
- Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- */
+#ifndef __CONFIG_H +#define __CONFIG_H +#include <asm/sizes.h>
+/*=======*/ +/* Board */ +/*=======*/ +#define CFG_PMDRA +#define CFG_NAND_LARGEPAGE +/*===================*/ +/* SoC Configuration */ +/*===================*/ +#define CONFIG_ARM926EJS /* arm926ejs CPU core */ +#define CONFIG_SYS_CLK_FREQ (CFG_HZ_CLOCK * (CFG_DAVINCI_PLL1_PLLM + 1)) / 2 +#define CFG_TIMERBASE 0x01c21400 /* use timer 0 */ +#define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */ +#define CFG_HZ 1000 +#define CFG_DAVINCI_PINMUX_0 0x00000c1f +#define CFG_DAVINCI_WAITCFG 0x10000000 +#define CFG_DAVINCI_ACFG2 0x00460385 /* NOR CE Config */ +#define CFG_DAVINCI_ACFG3 0x0822218c /* NAND CE Config */ +#define CFG_DAVINCI_ACFG4 0x3ffffffd +#define CFG_DAVINCI_ACFG5 0x3ffffffd +#define CFG_DAVINCI_NANDCE 3 /* Use CE3 for NAND */ +#define CFG_DAVINCI_DDRCTL 0x50006405 /* DDR timing config */ +#define CFG_DAVINCI_SDREF 0x000005c3 +#define CFG_DAVINCI_SDCFG 0x00178832 /* 8 banks , CAS = 4*/ +#define CFG_DAVINCI_SDTIM0 0x28923211 +#define CFG_DAVINCI_SDTIM1 0x0016c722 +#define CFG_DAVINCI_MMARG_BRF0 0x00444400 +#define CFG_DAVINCI_PLL1_PLLM 0x12 /* DM6446 = 0x15, DM6441 = 0x12, DM6441_LV = 0x0e */ +#define CFG_DAVINCI_PLL2_PLLM 0x17 /* 162 MHz */ +#define CFG_DAVINCI_PLL2_DIV1 0x0b /* 54 MHz */ +#define CFG_DAVINCI_PLL2_DIV2 0x01 +/*====================================================*/ +/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */ +/* on Sonata/DV_EVM board. No EEPROM on schmoogie. */ +/*====================================================*/ +#define CFG_I2C_EEPROM_ADDR_LEN 2 +#define CFG_I2C_EEPROM_ADDR 0x50 +#define CFG_EEPROM_PAGE_WRITE_BITS 6 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20 +/*=============*/ +/* Memory Info */ +/*=============*/ +#define CFG_MALLOC_LEN (0x10000 + 128*1024) /* malloc() len */ +#define CFG_GBL_DATA_SIZE 128 /* reserved for initial data */ +#define CFG_MEMTEST_START 0x80000000 /* memtest start address */ +#define CFG_MEMTEST_END 0x81000000 /* 16MB RAM test */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define CONFIG_STACKSIZE (256*1024) /* regular stack */ +#define PHYS_SDRAM_1 0x80000000 /* DDR Start */ +#define PHYS_SDRAM_1_SIZE 0x10000000 /* DDR size 256MB */ +#define DDR_8BANKS /* 8-bank DDR2 (256MB) */ +/*====================*/ +/* Serial Driver info */ +/*====================*/ +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 4 /* NS16550 register size */ +#define CFG_NS16550_COM1 0x01c20000 /* Base address of UART0 */ +#define CFG_NS16550_COM2 0x01c20800 /* Base address of UART2 */ +#define CFG_NS16550_CLK 27000000 /* Input clock to NS16550 */ +#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ +#define CONFIG_BAUDRATE 115200 /* Default baud rate */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +/*===================*/ +/* I2C Configuration */ +/*===================*/ +#define CONFIG_HARD_I2C +#define CONFIG_DRIVER_DAVINCI_I2C +#define CFG_I2C_SPEED 50000 /* 100Kbps won't work, silicon bug */ +#define CFG_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ +/*==================================*/ +/* Network & Ethernet Configuration */ +/*==================================*/ +#define CONFIG_DRIVER_TI_EMAC +#define CONFIG_MII +#define CONFIG_BOOTP_DEFAULT +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_NET_RETRY_COUNT 10 +/*=====================*/ +/* Flash & Environment */ +/*=====================*/ +#define CFG_USE_NAND +#define CFG_NAND_BASE 0x04000000 +#define CFG_NAND_HW_ECC +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_MAX_CHIPS 1 +#undef CONFIG_SKIP_LOWLEVEL_INIT +#undef CONFIG_SKIP_RELOCATE_UBOOT +#define DEF_BOOTM "" +#define CFG_ENV_IS_IN_FLASH 1 +#undef CFG_NO_FLASH +#define CFG_FLASH_CFI_DRIVER +#define CFG_FLASH_CFI +#define CFG_MAX_FLASH_BANKS 1 /* max number of flash banks */ +#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x40000) +#define CFG_ENV_OFFSET (CFG_ENV_ADDR) +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ +#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */ +#define CFG_FLASH_BASE PHYS_FLASH_1 /* Flash Base for U-Boot */ +#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */ +#define CFG_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CFG_FLASH_SECT_SZ) +#define CFG_ENV_SECT_SIZE CFG_FLASH_SECT_SZ /* Env sector Size */ +#define CFG_FLASH_SECT_SZ 0x20000 /* 128KB sect size INTEL Flash */ +#define CFG_FLASH_PROTECTION 1 +/*==============================*/ +/* U-Boot general configuration */ +/*==============================*/ +#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ +#define CONFIG_MISC_INIT_R +#define CONFIG_BOOTFILE "uImage" /* Boot file name */ +#define CFG_PROMPT "U-Boot > " /* Monitor Command Prompt */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buffer sz */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_LOAD_ADDR 0x80700000 /* default Linux kernel load address */ +#define CONFIG_VERSION_VARIABLE +#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */ +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#define CONFIG_CMDLINE_EDITING +#define CFG_LONGHELP +#define CONFIG_CRC32_VERIFY +#define CONFIG_MX_CYCLIC +/*===================*/ +/* Linux Information */ +/*===================*/ +#define LINUX_BOOT_PARAM_ADDR 0x80000100 +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_BOOTDELAY 2 +#define CONFIG_BOOTARGS "mem=120M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp" +#define CONFIG_BOOTCOMMAND "run nand" +#define CONFIG_EXTRA_ENV_SETTINGS "ethaddr=00:11:22:33:44:55\n" +/*=================*/ +/* U-Boot commands */ +/*=================*/ +#include <config_cmd_default.h> +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_EEPROM +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_SETGETDCR +#define CONFIG_CMD_FLASH +#undef CONFIG_CMD_IMLS +#define CONFIG_CMD_NAND +/*=======================*/ +/* KGDB support (if any) */ +/*=======================*/ +#ifdef CONFIG_CMD_KGDB +#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ +#endif
+#endif /* __CONFIG_H */
1.5.3.7
Pieter Voorthuijsen Prodrive B.V. Science Park Eindhoven P.O. box 28030 5602 JA Eindhoven The Netherlands
Email pieter.voorthuijsen@prodrive.nl Tel: +31-40-2676258 Fax: +31-40-2676201