The driver is based on the Versaclock driver from the Linux code, but due differences in the clock API between them, some pieces had to be changed.
This driver creates a mux, pfd, pll, and a series of fod ouputs. Rate Usecnt Name ------------------------------------------ 25000000 0 `-- x304-clock 25000000 0 `-- clock-controller@6a.mux 25000000 0 |-- clock-controller@6a.pfd 2800000000 0 | `-- clock-controller@6a.pll 33333333 0 | |-- clock-controller@6a.fod0 33333333 0 | | `-- clock-controller@6a.out1 33333333 0 | |-- clock-controller@6a.fod1 33333333 0 | | `-- clock-controller@6a.out2 50000000 0 | |-- clock-controller@6a.fod2 50000000 0 | | `-- clock-controller@6a.out3 125000000 0 | `-- clock-controller@6a.fod3 125000000 0 | `-- clock-controller@6a.out4 25000000 0 `-- clock-controller@6a.out0_sel_i2cb
A translation function is added so the references to <&versaclock X> get routed to the corresponding clock-controller@6a.outX.
Signed-off-by: Adam Ford aford173@gmail.com --- V4: Remove a few printf's that I missed when removing debug.
V3: Streamline finding the out OUTx subnodes. Add error handling. Replace printf and pr_err with dev_dbg. Restore registers removed in V2.
V2: Remove unused registers. Fix spacing in Makefile. Make the versaclock driver dependent on CCF. Move the versaclock_ids next to U_BOOT_DRIVER(versaclock)
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 40a5a5dd88..2a7507ea18 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -197,4 +197,13 @@ config SANDBOX_CLK_CCF Enable this option if you want to test the Linux kernel's Common Clock Framework [CCF] code in U-Boot's Sandbox clock driver.
+config CLK_VERSACLOCK + tristate "Enable VersaClock 5/6 devices" + depends on CLK + depends on CLK_CCF + depends on OF_CONTROL + help + This driver supports the IDT VersaClock 5 and VersaClock 6 + programmable clock generators. + endmenu diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 645709b855..6f5ddafd64 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -51,3 +51,4 @@ obj-$(CONFIG_SANDBOX_CLK_CCF) += clk_sandbox_ccf.o obj-$(CONFIG_STM32H7) += clk_stm32h7.o obj-$(CONFIG_CLK_VERSAL) += clk_versal.o obj-$(CONFIG_CLK_CDCE9XX) += clk-cdce9xx.o +obj-$(CONFIG_CLK_VERSACLOCK) += clk_versaclock.o diff --git a/drivers/clk/clk_versaclock.c b/drivers/clk/clk_versaclock.c new file mode 100644 index 0000000000..578668bcf8 --- /dev/null +++ b/drivers/clk/clk_versaclock.c @@ -0,0 +1,1100 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Driver for IDT Versaclock 5/6 + * + * Derived from code Copyright (C) 2017 Marek Vasut marek.vasut@gmail.com + */ + +#include <common.h> +#include <clk.h> +#include <clk-uclass.h> +#include <dm.h> +#include <errno.h> +#include <i2c.h> +#include <dm/device_compat.h> +#include <log.h> +#include <linux/clk-provider.h> +#include <linux/kernel.h> +#include <linux/math64.h> + +#include <dt-bindings/clk/versaclock.h> + +/* VersaClock5 registers */ +#define VC5_OTP_CONTROL 0x00 + +/* Factory-reserved register block */ +#define VC5_RSVD_DEVICE_ID 0x01 +#define VC5_RSVD_ADC_GAIN_7_0 0x02 +#define VC5_RSVD_ADC_GAIN_15_8 0x03 +#define VC5_RSVD_ADC_OFFSET_7_0 0x04 +#define VC5_RSVD_ADC_OFFSET_15_8 0x05 +#define VC5_RSVD_TEMPY 0x06 +#define VC5_RSVD_OFFSET_TBIN 0x07 +#define VC5_RSVD_GAIN 0x08 +#define VC5_RSVD_TEST_NP 0x09 +#define VC5_RSVD_UNUSED 0x0a +#define VC5_RSVD_BANDGAP_TRIM_UP 0x0b +#define VC5_RSVD_BANDGAP_TRIM_DN 0x0c +#define VC5_RSVD_CLK_R_12_CLK_AMP_4 0x0d +#define VC5_RSVD_CLK_R_34_CLK_AMP_4 0x0e +#define VC5_RSVD_CLK_AMP_123 0x0f + +/* Configuration register block */ +#define VC5_PRIM_SRC_SHDN 0x10 +#define VC5_PRIM_SRC_SHDN_EN_XTAL BIT(7) +#define VC5_PRIM_SRC_SHDN_EN_CLKIN BIT(6) +#define VC5_PRIM_SRC_SHDN_EN_DOUBLE_XTAL_FREQ BIT(3) +#define VC5_PRIM_SRC_SHDN_SP BIT(1) +#define VC5_PRIM_SRC_SHDN_EN_GBL_SHDN BIT(0) + +#define VC5_VCO_BAND 0x11 +#define VC5_XTAL_X1_LOAD_CAP 0x12 +#define VC5_XTAL_X2_LOAD_CAP 0x13 +#define VC5_REF_DIVIDER 0x15 +#define VC5_REF_DIVIDER_SEL_PREDIV2 BIT(7) +#define VC5_REF_DIVIDER_REF_DIV(n) ((n) & 0x3f) + +#define VC5_VCO_CTRL_AND_PREDIV 0x16 +#define VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV BIT(7) + +#define VC5_FEEDBACK_INT_DIV 0x17 +#define VC5_FEEDBACK_INT_DIV_BITS 0x18 +#define VC5_FEEDBACK_FRAC_DIV(n) (0x19 + (n)) +#define VC5_RC_CONTROL0 0x1e +#define VC5_RC_CONTROL1 0x1f +/* Register 0x20 is factory reserved */ + +/* Output divider control for divider 1,2,3,4 */ +#define VC5_OUT_DIV_CONTROL(idx) (0x21 + ((idx) * 0x10)) +#define VC5_OUT_DIV_CONTROL_RESET BIT(7) +#define VC5_OUT_DIV_CONTROL_SELB_NORM BIT(3) +#define VC5_OUT_DIV_CONTROL_SEL_EXT BIT(2) +#define VC5_OUT_DIV_CONTROL_INT_MODE BIT(1) +#define VC5_OUT_DIV_CONTROL_EN_FOD BIT(0) + +#define VC5_OUT_DIV_FRAC(idx, n) (0x22 + ((idx) * 0x10) + (n)) +#define VC5_OUT_DIV_FRAC4_OD_SCEE BIT(1) + +#define VC5_OUT_DIV_STEP_SPREAD(idx, n) (0x26 + ((idx) * 0x10) + (n)) +#define VC5_OUT_DIV_SPREAD_MOD(idx, n) (0x29 + ((idx) * 0x10) + (n)) +#define VC5_OUT_DIV_SKEW_INT(idx, n) (0x2b + ((idx) * 0x10) + (n)) +#define VC5_OUT_DIV_INT(idx, n) (0x2d + ((idx) * 0x10) + (n)) +#define VC5_OUT_DIV_SKEW_FRAC(idx) (0x2f + ((idx) * 0x10)) +/* Registers 0x30, 0x40, 0x50 are factory reserved */ + +/* Clock control register for clock 1,2 */ +#define VC5_CLK_OUTPUT_CFG(idx, n) (0x60 + ((idx) * 0x2) + (n)) +#define VC5_CLK_OUTPUT_CFG0_CFG_SHIFT 5 +#define VC5_CLK_OUTPUT_CFG0_CFG_MASK GENMASK(7, VC5_CLK_OUTPUT_CFG0_CFG_SHIFT) + +#define VC5_CLK_OUTPUT_CFG0_CFG_LVPECL (VC5_LVPECL) +#define VC5_CLK_OUTPUT_CFG0_CFG_CMOS (VC5_CMOS) +#define VC5_CLK_OUTPUT_CFG0_CFG_HCSL33 (VC5_HCSL33) +#define VC5_CLK_OUTPUT_CFG0_CFG_LVDS (VC5_LVDS) +#define VC5_CLK_OUTPUT_CFG0_CFG_CMOS2 (VC5_CMOS2) +#define VC5_CLK_OUTPUT_CFG0_CFG_CMOSD (VC5_CMOSD) +#define VC5_CLK_OUTPUT_CFG0_CFG_HCSL25 (VC5_HCSL25) + +#define VC5_CLK_OUTPUT_CFG0_PWR_SHIFT 3 +#define VC5_CLK_OUTPUT_CFG0_PWR_MASK GENMASK(4, VC5_CLK_OUTPUT_CFG0_PWR_SHIFT) +#define VC5_CLK_OUTPUT_CFG0_PWR_18 (0 << VC5_CLK_OUTPUT_CFG0_PWR_SHIFT) +#define VC5_CLK_OUTPUT_CFG0_PWR_25 (2 << VC5_CLK_OUTPUT_CFG0_PWR_SHIFT) +#define VC5_CLK_OUTPUT_CFG0_PWR_33 (3 << VC5_CLK_OUTPUT_CFG0_PWR_SHIFT) +#define VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT 0 +#define VC5_CLK_OUTPUT_CFG0_SLEW_MASK GENMASK(1, VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT) +#define VC5_CLK_OUTPUT_CFG0_SLEW_80 (0 << VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT) +#define VC5_CLK_OUTPUT_CFG0_SLEW_85 (1 << VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT) +#define VC5_CLK_OUTPUT_CFG0_SLEW_90 (2 << VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT) +#define VC5_CLK_OUTPUT_CFG0_SLEW_100 (3 << VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT) +#define VC5_CLK_OUTPUT_CFG1_EN_CLKBUF BIT(0) + +#define VC5_CLK_OE_SHDN 0x68 +#define VC5_CLK_OS_SHDN 0x69 + +#define VC5_GLOBAL_REGISTER 0x76 +#define VC5_GLOBAL_REGISTER_GLOBAL_RESET BIT(5) + +/* PLL/VCO runs between 2.5 GHz and 3.0 GHz */ +#define VC5_PLL_VCO_MIN 2500000000UL +#define VC5_PLL_VCO_MAX 3000000000UL + +/* VC5 Input mux settings */ +#define VC5_MUX_IN_XIN BIT(0) +#define VC5_MUX_IN_CLKIN BIT(1) + +/* Maximum number of clk_out supported by this driver */ +#define VC5_MAX_CLK_OUT_NUM 5 + +/* Maximum number of FODs supported by this driver */ +#define VC5_MAX_FOD_NUM 4 + +/* flags to describe chip features */ +/* chip has built-in oscilator */ +#define VC5_HAS_INTERNAL_XTAL BIT(0) +/* chip has PFD requency doubler */ +#define VC5_HAS_PFD_FREQ_DBL BIT(1) + +/* Supported IDT VC5 models. */ +enum vc5_model { + IDT_VC5_5P49V5923, + IDT_VC5_5P49V5925, + IDT_VC5_5P49V5933, + IDT_VC5_5P49V5935, + IDT_VC6_5P49V6901, + IDT_VC6_5P49V6965, +}; + +/* Structure to describe features of a particular VC5 model */ +struct vc5_chip_info { + const enum vc5_model model; + const unsigned int clk_fod_cnt; + const unsigned int clk_out_cnt; + const u32 flags; +}; + +struct vc5_driver_data; + +struct vc5_hw_data { + struct clk hw; + struct vc5_driver_data *vc5; + u32 div_int; + u32 div_frc; + unsigned int num; +}; + +struct vc5_out_data { + struct clk hw; + struct vc5_driver_data *vc5; + unsigned int num; + unsigned int clk_output_cfg0; + unsigned int clk_output_cfg0_mask; +}; + +struct vc5_driver_data { + struct udevice *i2c; + const struct vc5_chip_info *chip_info; + + struct clk *pin_xin; + struct clk *pin_clkin; + unsigned char clk_mux_ins; + struct clk clk_mux; + struct clk clk_mul; + struct clk clk_pfd; + struct vc5_hw_data clk_pll; + struct vc5_hw_data clk_fod[VC5_MAX_FOD_NUM]; + struct vc5_out_data clk_out[VC5_MAX_CLK_OUT_NUM]; +}; + +static const struct vc5_chip_info idt_5p49v5923_info = { + .model = IDT_VC5_5P49V5923, + .clk_fod_cnt = 2, + .clk_out_cnt = 3, + .flags = 0, +}; + +static const struct vc5_chip_info idt_5p49v5925_info = { + .model = IDT_VC5_5P49V5925, + .clk_fod_cnt = 4, + .clk_out_cnt = 5, + .flags = 0, +}; + +static const struct vc5_chip_info idt_5p49v5933_info = { + .model = IDT_VC5_5P49V5933, + .clk_fod_cnt = 2, + .clk_out_cnt = 3, + .flags = VC5_HAS_INTERNAL_XTAL, +}; + +static const struct vc5_chip_info idt_5p49v5935_info = { + .model = IDT_VC5_5P49V5935, + .clk_fod_cnt = 4, + .clk_out_cnt = 5, + .flags = VC5_HAS_INTERNAL_XTAL, +}; + +static const struct vc5_chip_info idt_5p49v6901_info = { + .model = IDT_VC6_5P49V6901, + .clk_fod_cnt = 4, + .clk_out_cnt = 5, + .flags = VC5_HAS_PFD_FREQ_DBL, +}; + +static const struct vc5_chip_info idt_5p49v6965_info = { + .model = IDT_VC6_5P49V6965, + .clk_fod_cnt = 4, + .clk_out_cnt = 5, + .flags = 0, +}; + +static int vc5_update_bits(struct udevice *dev, unsigned int reg, unsigned int mask, + unsigned int src) +{ + int ret; + unsigned char cache; + + ret = dm_i2c_read(dev, reg, &cache, 1); + if (ret < 0) + return ret; + + cache &= ~mask; + cache |= mask & src; + ret = dm_i2c_write(dev, reg, (uchar *)&cache, 1); + + return ret; +} + +static unsigned long vc5_mux_get_rate(struct clk *hw) +{ + return clk_get_rate(clk_get_parent(hw)); +} + +static int vc5_mux_set_parent(struct clk *hw, unsigned char index) +{ + struct vc5_driver_data *vc5 = container_of(hw, struct vc5_driver_data, clk_mux); + const u8 mask = VC5_PRIM_SRC_SHDN_EN_XTAL | VC5_PRIM_SRC_SHDN_EN_CLKIN; + u8 src; + + if (index > 1 || !vc5->clk_mux_ins) + return -EINVAL; + + if (vc5->clk_mux_ins == (VC5_MUX_IN_CLKIN | VC5_MUX_IN_XIN)) { + if (index == 0) + src = VC5_PRIM_SRC_SHDN_EN_XTAL; + if (index == 1) + src = VC5_PRIM_SRC_SHDN_EN_CLKIN; + } else { + if (index != 0) + return -EINVAL; + + if (vc5->clk_mux_ins == VC5_MUX_IN_XIN) + src = VC5_PRIM_SRC_SHDN_EN_XTAL; + else if (vc5->clk_mux_ins == VC5_MUX_IN_CLKIN) + src = VC5_PRIM_SRC_SHDN_EN_CLKIN; + else /* Invalid; should have been caught by vc5_probe() */ + return -EINVAL; + } + + return vc5_update_bits(vc5->i2c, VC5_PRIM_SRC_SHDN, mask, src); +} + +static const struct clk_ops vc5_mux_ops = { + .get_rate = vc5_mux_get_rate, +}; + +static unsigned long vc5_pfd_round_rate(struct clk *hw, unsigned long rate) +{ + struct clk *clk_parent = clk_get_parent(hw); + unsigned long parent_rate = clk_get_rate(clk_parent); + unsigned long idiv; + + /* PLL cannot operate with input clock above 50 MHz. */ + if (rate > 50000000) + return -EINVAL; + + /* CLKIN within range of PLL input, feed directly to PLL. */ + if (parent_rate <= 50000000) + return parent_rate; + + idiv = DIV_ROUND_UP(parent_rate, rate); + if (idiv > 127) + return -EINVAL; + + return parent_rate / idiv; +} + +static unsigned long vc5_pfd_recalc_rate(struct clk *hw) +{ + struct vc5_driver_data *vc5 = + container_of(hw, struct vc5_driver_data, clk_pfd); + unsigned int prediv, div; + struct clk *clk_parent = clk_get_parent(hw); + unsigned long parent_rate = clk_get_rate(clk_parent); + + dm_i2c_read(vc5->i2c, VC5_VCO_CTRL_AND_PREDIV, (uchar *)&prediv, 1); + + /* The bypass_prediv is set, PLL fed from Ref_in directly. */ + if (prediv & VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV) + return parent_rate; + + dm_i2c_read(vc5->i2c, VC5_REF_DIVIDER, (uchar *)&div, 1); + + /* The Sel_prediv2 is set, PLL fed from prediv2 (Ref_in / 2) */ + if (div & VC5_REF_DIVIDER_SEL_PREDIV2) + return parent_rate / 2; + else + return parent_rate / VC5_REF_DIVIDER_REF_DIV(div); +} + +static unsigned long vc5_pfd_set_rate(struct clk *hw, unsigned long rate) +{ + struct vc5_driver_data *vc5 = + container_of(hw, struct vc5_driver_data, clk_pfd); + unsigned long idiv; + u8 div; + struct clk *clk_parent = clk_get_parent(hw); + unsigned long parent_rate = clk_get_rate(clk_parent); + + /* CLKIN within range of PLL input, feed directly to PLL. */ + if (parent_rate <= 50000000) { + vc5_update_bits(vc5->i2c, VC5_VCO_CTRL_AND_PREDIV, + VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV, + VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV); + vc5_update_bits(vc5->i2c, VC5_REF_DIVIDER, 0xff, 0x00); + return 0; + } + + idiv = DIV_ROUND_UP(parent_rate, rate); + + /* We have dedicated div-2 predivider. */ + if (idiv == 2) + div = VC5_REF_DIVIDER_SEL_PREDIV2; + else + div = VC5_REF_DIVIDER_REF_DIV(idiv); + + vc5_update_bits(vc5->i2c, VC5_REF_DIVIDER, 0xff, div); + vc5_update_bits(vc5->i2c, VC5_VCO_CTRL_AND_PREDIV, + VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV, 0); + + return 0; +} + +static const struct clk_ops vc5_pfd_ops = { + .round_rate = vc5_pfd_round_rate, + .get_rate = vc5_pfd_recalc_rate, + .set_rate = vc5_pfd_set_rate, +}; + +/* + * VersaClock5 PLL/VCO + */ +static unsigned long vc5_pll_recalc_rate(struct clk *hw) +{ + struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw); + struct vc5_driver_data *vc = hwdata->vc5; + struct clk *clk_parent = clk_get_parent(hw); + unsigned long parent_rate = clk_get_rate(clk_parent); + u32 div_int, div_frc; + u8 fb[5]; + + dm_i2c_read(vc->i2c, VC5_FEEDBACK_INT_DIV, fb, 5); + + div_int = (fb[0] << 4) | (fb[1] >> 4); + div_frc = (fb[2] << 16) | (fb[3] << 8) | fb[4]; + + /* The PLL divider has 12 integer bits and 24 fractional bits */ + return (parent_rate * div_int) + ((parent_rate * div_frc) >> 24); +} + +static unsigned long vc5_pll_round_rate(struct clk *hw, unsigned long rate) +{ + struct clk *clk_parent = clk_get_parent(hw); + unsigned long parent_rate = clk_get_rate(clk_parent); + struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw); + u32 div_int; + u64 div_frc; + + if (rate < VC5_PLL_VCO_MIN) + rate = VC5_PLL_VCO_MIN; + if (rate > VC5_PLL_VCO_MAX) + rate = VC5_PLL_VCO_MAX; + + /* Determine integer part, which is 12 bit wide */ + div_int = rate / parent_rate; + if (div_int > 0xfff) + rate = parent_rate * 0xfff; + + /* Determine best fractional part, which is 24 bit wide */ + div_frc = rate % parent_rate; + div_frc *= BIT(24) - 1; + do_div(div_frc, parent_rate); + + hwdata->div_int = div_int; + hwdata->div_frc = (u32)div_frc; + + return (parent_rate * div_int) + ((parent_rate * div_frc) >> 24); +} + +static unsigned long vc5_pll_set_rate(struct clk *hw, unsigned long rate) +{ + struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw); + struct vc5_driver_data *vc5 = hwdata->vc5; + u8 fb[5]; + + fb[0] = hwdata->div_int >> 4; + fb[1] = hwdata->div_int << 4; + fb[2] = hwdata->div_frc >> 16; + fb[3] = hwdata->div_frc >> 8; + fb[4] = hwdata->div_frc; + + return dm_i2c_write(vc5->i2c, VC5_FEEDBACK_INT_DIV, fb, 5); +} + +static const struct clk_ops vc5_pll_ops = { + .round_rate = vc5_pll_round_rate, + .get_rate = vc5_pll_recalc_rate, + .set_rate = vc5_pll_set_rate, +}; + +static unsigned long vc5_fod_recalc_rate(struct clk *hw) +{ + struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw); + struct vc5_driver_data *vc = hwdata->vc5; + struct clk *parent = &vc->clk_pll.hw; + unsigned long parent_rate = vc5_pll_recalc_rate(parent); + + /* VCO frequency is divided by two before entering FOD */ + u32 f_in = parent_rate / 2; + u32 div_int, div_frc; + u8 od_int[2]; + u8 od_frc[4]; + + dm_i2c_read(vc->i2c, VC5_OUT_DIV_INT(hwdata->num, 0), od_int, 2); + dm_i2c_read(vc->i2c, VC5_OUT_DIV_FRAC(hwdata->num, 0), od_frc, 4); + + div_int = (od_int[0] << 4) | (od_int[1] >> 4); + div_frc = (od_frc[0] << 22) | (od_frc[1] << 14) | + (od_frc[2] << 6) | (od_frc[3] >> 2); + + /* Avoid division by zero if the output is not configured. */ + if (div_int == 0 && div_frc == 0) + return 0; + + /* The PLL divider has 12 integer bits and 30 fractional bits */ + return div64_u64((u64)f_in << 24ULL, ((u64)div_int << 24ULL) + div_frc); +} + +static unsigned long vc5_fod_round_rate(struct clk *hw, unsigned long rate) +{ + struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw); + struct vc5_driver_data *vc = hwdata->vc5; + struct clk *parent = &vc->clk_pll.hw; + unsigned long parent_rate = vc5_pll_recalc_rate(parent); + + /* VCO frequency is divided by two before entering FOD */ + u32 f_in = parent_rate / 2; + u32 div_int; + u64 div_frc; + + /* Determine integer part, which is 12 bit wide */ + div_int = f_in / rate; + + /* + * WARNING: The clock chip does not output signal if the integer part + * of the divider is 0xfff and fractional part is non-zero. + * Clamp the divider at 0xffe to keep the code simple. + */ + if (div_int > 0xffe) { + div_int = 0xffe; + rate = f_in / div_int; + } + + /* Determine best fractional part, which is 30 bit wide */ + div_frc = f_in % rate; + div_frc <<= 24; + do_div(div_frc, rate); + + hwdata->div_int = div_int; + hwdata->div_frc = (u32)div_frc; + + return div64_u64((u64)f_in << 24ULL, ((u64)div_int << 24ULL) + div_frc); +} + +static unsigned long vc5_fod_set_rate(struct clk *hw, unsigned long rate) +{ + struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw); + struct vc5_driver_data *vc5 = hwdata->vc5; + + u8 data[14] = { + hwdata->div_frc >> 22, hwdata->div_frc >> 14, + hwdata->div_frc >> 6, hwdata->div_frc << 2, + 0, 0, 0, 0, 0, + 0, 0, + hwdata->div_int >> 4, hwdata->div_int << 4, + 0 + }; + + dm_i2c_write(vc5->i2c, VC5_OUT_DIV_FRAC(hwdata->num, 0), data, 14); + + /* + * Toggle magic bit in undocumented register for unknown reason. + * This is what the IDT timing commander tool does and the chip + * datasheet somewhat implies this is needed, but the register + * and the bit is not documented. + */ + vc5_update_bits(vc5->i2c, VC5_GLOBAL_REGISTER, + VC5_GLOBAL_REGISTER_GLOBAL_RESET, 0); + vc5_update_bits(vc5->i2c, VC5_GLOBAL_REGISTER, + VC5_GLOBAL_REGISTER_GLOBAL_RESET, + VC5_GLOBAL_REGISTER_GLOBAL_RESET); + + return 0; +} + +static const struct clk_ops vc5_fod_ops = { + .round_rate = vc5_fod_round_rate, + .get_rate = vc5_fod_recalc_rate, + .set_rate = vc5_fod_set_rate, +}; + +static int vc5_clk_out_prepare(struct clk *hw) +{ + struct udevice *dev; + struct vc5_driver_data *vc5; + struct vc5_out_data *hwdata; + + const u8 mask = VC5_OUT_DIV_CONTROL_SELB_NORM | + VC5_OUT_DIV_CONTROL_SEL_EXT | + VC5_OUT_DIV_CONTROL_EN_FOD; + unsigned int src; + int ret; + + uclass_get_device_by_name(UCLASS_CLK, clk_hw_get_name(hw), &dev); + vc5 = dev_get_priv(dev); + hwdata = &vc5->clk_out[hw->id]; + + /* + * If the input mux is disabled, enable it first and + * select source from matching FOD. + */ + + dm_i2c_read(vc5->i2c, VC5_OUT_DIV_CONTROL(hwdata->num), (uchar *)&src, 1); + + if ((src & mask) == 0) { + src = VC5_OUT_DIV_CONTROL_RESET | VC5_OUT_DIV_CONTROL_EN_FOD; + ret = vc5_update_bits(vc5->i2c, + VC5_OUT_DIV_CONTROL(hwdata->num), + mask | VC5_OUT_DIV_CONTROL_RESET, src); + if (ret) + return ret; + } + + /* Enable the clock buffer */ + vc5_update_bits(vc5->i2c, VC5_CLK_OUTPUT_CFG(hwdata->num, 1), + VC5_CLK_OUTPUT_CFG1_EN_CLKBUF, + VC5_CLK_OUTPUT_CFG1_EN_CLKBUF); + if (hwdata->clk_output_cfg0_mask) { + vc5_update_bits(vc5->i2c, VC5_CLK_OUTPUT_CFG(hwdata->num, 0), + hwdata->clk_output_cfg0_mask, + hwdata->clk_output_cfg0); + } + + return 0; +} + +static int vc5_clk_out_unprepare(struct clk *hw) +{ + struct udevice *dev; + struct vc5_driver_data *vc5; + struct vc5_out_data *hwdata; + int ret; + + uclass_get_device_by_name(UCLASS_CLK, clk_hw_get_name(hw), &dev); + vc5 = dev_get_priv(dev); + hwdata = &vc5->clk_out[hw->id]; + + /* Disable the clock buffer */ + ret = vc5_update_bits(vc5->i2c, VC5_CLK_OUTPUT_CFG(hwdata->num, 1), + VC5_CLK_OUTPUT_CFG1_EN_CLKBUF, 0); + + return ret; +} + +static int vc5_clk_out_set_parent(struct vc5_driver_data *vc, u8 num, u8 index) +{ + const u8 mask = VC5_OUT_DIV_CONTROL_RESET | + VC5_OUT_DIV_CONTROL_SELB_NORM | + VC5_OUT_DIV_CONTROL_SEL_EXT | + VC5_OUT_DIV_CONTROL_EN_FOD; + const u8 extclk = VC5_OUT_DIV_CONTROL_SELB_NORM | + VC5_OUT_DIV_CONTROL_SEL_EXT; + u8 src = VC5_OUT_DIV_CONTROL_RESET; + + if (index == 0) + src |= VC5_OUT_DIV_CONTROL_EN_FOD; + else + src |= extclk; + + return vc5_update_bits(vc->i2c, VC5_OUT_DIV_CONTROL(num), mask, src); +} + +/* + * The device references to the Versaclock point to the head, so xlate needs to + * redirect it to clk_out[idx] + */ +static int vc5_clk_out_xlate(struct clk *hw, struct ofnode_phandle_args *args) +{ + unsigned int idx = args->args[0]; + + if (args->args_count != 1) { + debug("Invaild args_count: %d\n", args->args_count); + return -EINVAL; + } + + hw->id = idx; + + return 0; +} + +static unsigned long vc5_clk_out_set_rate(struct clk *hw, unsigned long rate) +{ + struct udevice *dev; + struct vc5_driver_data *vc; + struct clk *parent; + + uclass_get_device_by_name(UCLASS_CLK, clk_hw_get_name(hw), &dev); + vc = dev_get_priv(dev); + parent = clk_get_parent(&vc->clk_out[hw->id].hw); + + /* setting the output rate really means setting the parent FOD rate */ + return clk_set_rate(parent, clk_round_rate(parent, rate)); +} + +static unsigned long vc5_clk_out_get_rate(struct clk *hw) +{ + return clk_get_parent_rate(hw); +} + +static const struct clk_ops vc5_clk_out_ops = { + .enable = vc5_clk_out_prepare, + .disable = vc5_clk_out_unprepare, + .set_rate = vc5_clk_out_set_rate, + .get_rate = vc5_clk_out_get_rate, +}; + +static const struct clk_ops vc5_clk_out_sel_ops = { + .enable = vc5_clk_out_prepare, + .disable = vc5_clk_out_unprepare, + .get_rate = vc5_clk_out_get_rate, +}; + +static const struct clk_ops vc5_clk_ops = { + .enable = vc5_clk_out_prepare, + .disable = vc5_clk_out_unprepare, + .of_xlate = vc5_clk_out_xlate, + .set_rate = vc5_clk_out_set_rate, + .get_rate = vc5_clk_out_get_rate, +}; + +static int vc5_map_index_to_output(const enum vc5_model model, + const unsigned int n) +{ + switch (model) { + case IDT_VC5_5P49V5933: + return (n == 0) ? 0 : 3; + case IDT_VC5_5P49V5923: + case IDT_VC5_5P49V5925: + case IDT_VC5_5P49V5935: + case IDT_VC6_5P49V6901: + case IDT_VC6_5P49V6965: + default: + return n; + } +} + +static int vc5_update_mode(ofnode np_output, + struct vc5_out_data *clk_out) +{ + u32 value; + + if (!ofnode_read_u32(np_output, "idt,mode", &value)) { + clk_out->clk_output_cfg0_mask |= VC5_CLK_OUTPUT_CFG0_CFG_MASK; + switch (value) { + case VC5_CLK_OUTPUT_CFG0_CFG_LVPECL: + case VC5_CLK_OUTPUT_CFG0_CFG_CMOS: + case VC5_CLK_OUTPUT_CFG0_CFG_HCSL33: + case VC5_CLK_OUTPUT_CFG0_CFG_LVDS: + case VC5_CLK_OUTPUT_CFG0_CFG_CMOS2: + case VC5_CLK_OUTPUT_CFG0_CFG_CMOSD: + case VC5_CLK_OUTPUT_CFG0_CFG_HCSL25: + clk_out->clk_output_cfg0 |= + value << VC5_CLK_OUTPUT_CFG0_CFG_SHIFT; + break; + default: + return -EINVAL; + } + } + + return 0; +} + +static int vc5_update_power(ofnode np_output, struct vc5_out_data *clk_out) +{ + u32 value; + + if (!ofnode_read_u32(np_output, "idt,voltage-microvolt", &value)) { + clk_out->clk_output_cfg0_mask |= VC5_CLK_OUTPUT_CFG0_PWR_MASK; + switch (value) { + case 1800000: + clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_PWR_18; + break; + case 2500000: + clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_PWR_25; + break; + case 3300000: + clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_PWR_33; + break; + default: + return -EINVAL; + } + } + return 0; +} + +static int vc5_map_cap_value(u32 femtofarads) +{ + int mapped_value; + + /* + * The datasheet explicitly states 9000 - 25000 with 0.5pF + * steps, but the Programmer's guide shows the steps are 0.430pF. + * After getting feedback from Renesas, the .5pF steps were the + * goal, but 430nF was the actual values. + * Because of this, the actual range goes to 22760 instead of 25000 + */ + if (femtofarads < 9000 || femtofarads > 22760) + return -EINVAL; + + /* + * The Programmer's guide shows XTAL[5:0] but in reality, + * XTAL[0] and XTAL[1] are both LSB which makes the math + * strange. With clarfication from Renesas, setting the + * values should be simpler by ignoring XTAL[0] + */ + mapped_value = DIV_ROUND_CLOSEST(femtofarads - 9000, 430); + + /* + * Since the calculation ignores XTAL[0], there is one + * special case where mapped_value = 32. In reality, this means + * the real mapped value should be 111111b. In other cases, + * the mapped_value needs to be shifted 1 to the left. + */ + if (mapped_value > 31) + mapped_value = 0x3f; + else + mapped_value <<= 1; + + return mapped_value; +} + +static int vc5_update_cap_load(ofnode node, struct vc5_driver_data *vc5) +{ + u32 value; + int mapped_value; + + if (!ofnode_read_u32(node, "idt,xtal-load-femtofarads", &value)) { + mapped_value = vc5_map_cap_value(value); + + if (mapped_value < 0) + return mapped_value; + + /* + * The mapped_value is really the high 6 bits of + * VC5_XTAL_X1_LOAD_CAP and VC5_XTAL_X2_LOAD_CAP, so + * shift the value 2 places. + */ + vc5_update_bits(vc5->i2c, VC5_XTAL_X1_LOAD_CAP, ~0x03, mapped_value << 2); + vc5_update_bits(vc5->i2c, VC5_XTAL_X2_LOAD_CAP, ~0x03, mapped_value << 2); + } + + return 0; +} + +static int vc5_update_slew(ofnode np_output, struct vc5_out_data *clk_out) +{ + u32 value; + + if (!ofnode_read_u32(np_output, "idt,slew-percent", &value)) { + clk_out->clk_output_cfg0_mask |= VC5_CLK_OUTPUT_CFG0_SLEW_MASK; + + switch (value) { + case 80: + clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_SLEW_80; + break; + case 85: + clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_SLEW_85; + break; + case 90: + clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_SLEW_90; + break; + case 100: + clk_out->clk_output_cfg0 |= + VC5_CLK_OUTPUT_CFG0_SLEW_100; + break; + default: + return -EINVAL; + } + } + return 0; +} + +static int vc5_get_output_config(struct udevice *dev, + struct vc5_out_data *clk_out) +{ + ofnode np_output; + char child_name[5]; + int ret = 0; + + sprintf(child_name, "OUT%d", clk_out->num + 1); + + np_output = dev_read_subnode(dev, child_name); + + if (!ofnode_valid(np_output)) { + dev_dbg(dev, "Invalid clock output configuration OUT%d\n", + clk_out->num + 1); + return 0; + } + + ret = vc5_update_mode(np_output, clk_out); + if (ret) + return ret; + + ret = vc5_update_power(np_output, clk_out); + if (ret) + return ret; + + ret = vc5_update_slew(np_output, clk_out); + + return ret; +} + +static char *versaclock_get_name(const char *dev_name, const char *clk_name, int index) +{ + int length; + char *buf; + + if (index < 0) + length = snprintf(NULL, 0, "%s.%s", dev_name, clk_name) + 1; + else + length = snprintf(NULL, 0, "%s.%s%d", dev_name, clk_name, index) + 1; + + buf = malloc(length); + if (!buf) + ERR_PTR(-ENOMEM); + + if (index < 0) + snprintf(buf, length, "%s.%s", dev_name, clk_name); + else + snprintf(buf, length, "%s.%s%d", dev_name, clk_name, index); + + return buf; +} + +int versaclock_probe(struct udevice *dev) +{ + struct vc5_driver_data *vc5 = dev_get_priv(dev); + struct vc5_chip_info *chip = (void *)dev_get_driver_data(dev); + unsigned int n, idx = 0; + char *mux_name, *pfd_name, *pll_name, *outsel_name; + char *out_name[VC5_MAX_CLK_OUT_NUM]; + char *fod_name[VC5_MAX_FOD_NUM]; + int ret; + u64 val; + + val = (u64)dev_read_addr_ptr(dev); + ret = i2c_get_chip(dev->parent, val, 1, &vc5->i2c); + + if (ret) { + dev_dbg(dev, "I2C probe failed.\n"); + return ret; + } + + vc5->chip_info = chip; + vc5->pin_xin = devm_clk_get(dev, "xin"); + + if (IS_ERR(vc5->pin_xin)) + dev_dbg(dev, "failed to get xin clock\n"); + + ret = clk_enable(vc5->pin_xin); + if (ret) + dev_dbg(dev, "failed to enable XIN clock\n"); + + vc5->pin_clkin = devm_clk_get(dev, "clkin"); + + /* Register clock input mux */ + if (!IS_ERR(vc5->pin_xin)) { + vc5->clk_mux_ins |= VC5_MUX_IN_XIN; + } else if (vc5->chip_info->flags & VC5_HAS_INTERNAL_XTAL) { + if (IS_ERR(vc5->pin_xin)) + return PTR_ERR(vc5->pin_xin); + vc5->clk_mux_ins |= VC5_MUX_IN_XIN; + } + + mux_name = versaclock_get_name(dev->name, "mux", -1); + if (IS_ERR(mux_name)) + return PTR_ERR(mux_name); + + clk_register(&vc5->clk_mux, "versaclock-mux", mux_name, vc5->pin_xin->dev->name); + + if (!IS_ERR(vc5->pin_xin)) + vc5_mux_set_parent(&vc5->clk_mux, 1); + else + vc5_mux_set_parent(&vc5->clk_mux, 0); + + /* Configure Optional Loading Capacitance for external XTAL */ + if (!(vc5->chip_info->flags & VC5_HAS_INTERNAL_XTAL)) { + ret = vc5_update_cap_load(dev_ofnode(dev), vc5); + if (ret) + dev_dbg(dev, "failed to vc5_update_cap_load\n"); + } + + /* Register PFD */ + pfd_name = versaclock_get_name(dev->name, "pfd", -1); + if (IS_ERR(pfd_name)) { + ret = PTR_ERR(pfd_name); + goto free_mux; + } + + ret = clk_register(&vc5->clk_pfd, "versaclock-pfd", pfd_name, vc5->clk_mux.dev->name); + if (ret) + goto free_pfd; + + /* Register PLL */ + vc5->clk_pll.num = 0; + vc5->clk_pll.vc5 = vc5; + pll_name = versaclock_get_name(dev->name, "pll", -1); + if (IS_ERR(pll_name)) { + ret = PTR_ERR(pll_name); + goto free_pfd; + } + + ret = clk_register(&vc5->clk_pll.hw, "versaclock-pll", pll_name, vc5->clk_pfd.dev->name); + if (ret) + goto free_pll; + + /* Register FODs */ + for (n = 0; n < vc5->chip_info->clk_fod_cnt; n++) { + fod_name[n] = versaclock_get_name(dev->name, "fod", n); + if (IS_ERR(pll_name)) { + ret = PTR_ERR(fod_name[n]); + goto free_fod; + } + idx = vc5_map_index_to_output(vc5->chip_info->model, n); + vc5->clk_fod[n].num = idx; + vc5->clk_fod[n].vc5 = vc5; + ret = clk_register(&vc5->clk_fod[n].hw, "versaclock-fod", fod_name[n], + vc5->clk_pll.hw.dev->name); + if (ret) + goto free_fod; + } + + /* Register MUX-connected OUT0_I2C_SELB output */ + vc5->clk_out[0].num = idx; + vc5->clk_out[0].vc5 = vc5; + outsel_name = versaclock_get_name(dev->name, "out0_sel_i2cb", -1); + if (IS_ERR(outsel_name)) { + ret = PTR_ERR(outsel_name); + goto free_fod; + }; + + ret = clk_register(&vc5->clk_out[0].hw, "versaclock-outsel", outsel_name, + vc5->clk_mux.dev->name); + if (ret) + goto free_selb; + + /* Register FOD-connected OUTx outputs */ + for (n = 1; n < vc5->chip_info->clk_out_cnt; n++) { + idx = vc5_map_index_to_output(vc5->chip_info->model, n - 1); + out_name[n] = versaclock_get_name(dev->name, "out", n); + if (IS_ERR(out_name[n])) { + ret = PTR_ERR(out_name[n]); + goto free_selb; + } + vc5->clk_out[n].num = idx; + vc5->clk_out[n].vc5 = vc5; + ret = clk_register(&vc5->clk_out[n].hw, "versaclock-out", out_name[n], + vc5->clk_fod[idx].hw.dev->name); + if (ret) + goto free_out; + vc5_clk_out_set_parent(vc5, idx, 0); + + /* Fetch Clock Output configuration from DT (if specified) */ + ret = vc5_get_output_config(dev, &vc5->clk_out[n]); + if (ret) { + dev_dbg(dev, "failed to vc5_get_output_config()\n"); + goto free_out; + } + } + + return 0; + +free_out: + for (n = 1; n < vc5->chip_info->clk_out_cnt; n++) { + clk_free(&vc5->clk_out[n].hw); + free(out_name[n]); + } +free_selb: + clk_free(&vc5->clk_out[0].hw); + free(outsel_name); +free_fod: + for (n = 0; n < vc5->chip_info->clk_fod_cnt; n++) { + clk_free(&vc5->clk_fod[n].hw); + free(fod_name[n]); + } +free_pll: + clk_free(&vc5->clk_pll.hw); + free(pll_name); +free_pfd: + clk_free(&vc5->clk_pfd); + free(pfd_name); +free_mux: + clk_free(&vc5->clk_mux); + free(mux_name); + + return ret; +} + +static const struct udevice_id versaclock_ids[] = { + { .compatible = "idt,5p49v5923", .data = (ulong)&idt_5p49v5923_info }, + { .compatible = "idt,5p49v5925", .data = (ulong)&idt_5p49v5925_info }, + { .compatible = "idt,5p49v5933", .data = (ulong)&idt_5p49v5933_info }, + { .compatible = "idt,5p49v5935", .data = (ulong)&idt_5p49v5935_info }, + { .compatible = "idt,5p49v6901", .data = (ulong)&idt_5p49v6901_info }, + { .compatible = "idt,5p49v6965", .data = (ulong)&idt_5p49v6965_info }, + {}, +}; + +U_BOOT_DRIVER(versaclock) = { + .name = "versaclock", + .id = UCLASS_CLK, + .ops = &vc5_clk_ops, + .of_match = versaclock_ids, + .probe = versaclock_probe, + .priv_auto = sizeof(struct vc5_driver_data), +}; + +U_BOOT_DRIVER(versaclock_mux) = { + .name = "versaclock-mux", + .id = UCLASS_CLK, + .ops = &vc5_mux_ops, +}; + +U_BOOT_DRIVER(versaclock_pfd) = { + .name = "versaclock-pfd", + .id = UCLASS_CLK, + .ops = &vc5_pfd_ops, +}; + +U_BOOT_DRIVER(versaclock_pll) = { + .name = "versaclock-pll", + .id = UCLASS_CLK, + .ops = &vc5_pll_ops, +}; + +U_BOOT_DRIVER(versaclock_fod) = { + .name = "versaclock-fod", + .id = UCLASS_CLK, + .ops = &vc5_fod_ops, +}; + +U_BOOT_DRIVER(versaclock_out) = { + .name = "versaclock-out", + .id = UCLASS_CLK, + .ops = &vc5_clk_out_ops, +}; + +U_BOOT_DRIVER(versaclock_outsel) = { + .name = "versaclock-outsel", + .id = UCLASS_CLK, + .ops = &vc5_clk_out_sel_ops, +};