On 1/3/23 17:35, Sergiu Moga wrote:
This patch series originates from the bigger patch series: https://lists.denx.de/pipermail/u-boot/2022-December/502865.html
Add the basic DT USB definitions for SAM9X60, SAMA5D2 and SAMA7. The required pinctrl definitions have been added as well as additional definitions for the UTMI related clocks and their relationship with the Reset driver.
v1 -> v2:
- split patches for SoC/Board separately
- use usb@
Sergiu Moga (9): ARM: dts: sam9x60: Add OHCI and EHCI DT nodes ARM: dts: sam9x60_curiosity: Add pinctrl and gpio properties for USB ARM: dts: sam9x60ek: Add pinctrl and gpio properties for USB dt-bindings: reset: add sama7g5 definitions dt-bindings: clk: at91: Define additional UTMI related clocks ARM: dts: sama7g5: Add USB and UTMI DT nodes ARM: dts: sama7g5ek: Add pinctrl, gpio and phy properties for USB ARM: dts: sama5d2_icp: Add pinctrl nodes for USB related DT nodes ARM: dts: sama5d27_wlsom1_ek: Add pinctrl nodes for USB DT nodes
arch/arm/dts/at91-sam9x60_curiosity.dts | 21 +++++++ arch/arm/dts/at91-sama5d27_wlsom1_ek.dts | 25 ++++++++ arch/arm/dts/at91-sama5d2_icp.dts | 22 +++++++ arch/arm/dts/at91-sama7g5ek.dts | 34 +++++++++++ arch/arm/dts/sam9x60.dtsi | 18 ++++++ arch/arm/dts/sam9x60ek.dts | 21 +++++++ arch/arm/dts/sama7g5.dtsi | 73 +++++++++++++++++++++++ include/dt-bindings/clk/at91.h | 5 ++ include/dt-bindings/reset/sama7g5-reset.h | 10 ++++ 9 files changed, 229 insertions(+) create mode 100644 include/dt-bindings/reset/sama7g5-reset.h
Hi Marek,
If you have nothing against it, I will take the DTs through at91 tree now, as I am preparing my PR for 2023.04 . As DT is ABI and this series is on the list for a while now, I see no reason to delay it. Are you fine with that ?
Thanks, Eugen