[U-Boot-Users] U-boot reset command on MPC8548CDS

Hi,

I have u-boot 1.1.6 running on my MPC8548CDS board. When trying the u-boot 'reset' command, the board hangs after RAM initialization. Stepping through the code showed, that the board hangs when accessing the DDR RAM during relocation. Accessing RAM isn't also possible with my BDI2000 in that state.

Is this a known issue? Why is the RAM not longer accessible after the 2nd initialization?

Best regards,

Thomas Schafer

____________________________________

Kontron Modular Computers GmbH

Heinrich-Barth-Str. 1a 66115 Saarbrucken

Tel.: + 49 (0)681 / 95916 - 203 Fax: + 49 (0)681 / 95916 - 100 E-mail: thomas.schaefer@kontron.com