On 2023-07-23 16:55, Jonas Karlman wrote:
The Pine64 Quartz64 Model A is a single-board computer based on the Rockchip RK3566 SoC. The board features USB3, SATA, PCIe, HDMI, USB2.0, CSI, DSI, eDP, eMMC, SD, and an e-paper parallel port, as well as a 20 pin GPIO header.
Features tested on a Quartz64-A 8GB v2.0 2021-04-27:
- SD-card boot
- eMMC boot
- PCIe/NVMe/AHCI
- USB host
Device tree is imported from linux v6.4.
Co-developed-by: Nicolas Frattaroli frattaroli.nicolas@gmail.com Signed-off-by: Nicolas Frattaroli frattaroli.nicolas@gmail.com Signed-off-by: Jonas Karlman jonas@kwiboo.se
[...]
Boot log with ROCKCHIP_TPL=rk3566_ddr_1056MHz_v1.17.bin and BL31=rk3568_bl31_v1.43.elf:
DDR V1.17 992b933606 typ 23/04/25-10:10:19 ln LP4/4x derate en, other dram:1x trefi ddrconfig:7 LPDDR4X, 324MHz BW=32 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=8192MB tdqss: cs0 dqs0: 72ps, dqs1: -96ps, dqs2: -48ps, dqs3: -144ps, tdqss: cs1 dqs0: 48ps, dqs1: -96ps, dqs2: -48ps, dqs3: -120ps,
change to: 324MHz clk skew:0x61
change to: 528MHz clk skew:0x58
change to: 780MHz clk skew:0x58
change to: 1056MHz(final freq) PHY drv:clk:36,ca:36,DQ:29,odt:60 vrefinner:16%, vrefout:22% dram drv:40,odt:80 vref_ca:00000071 clk skew:0x2f cs 0: the read training result: DQS0:0x3e, DQS1:0x3d, DQS2:0x42, DQS3:0x3a, min : 0xd 0xe 0xe 0xd 0x1 0x2 0x5 0x1 , 0x6 0x7 0x2 0x1 0xa 0x9 0xe 0x9 , 0x10 0xf 0xe 0xa 0x6 0x1 0x1 0x4 , 0xb 0x8 0x4 0x1 0xd 0xa 0x9 0xc , mid :0x2b 0x2c 0x2d 0x2c 0x20 0x22 0x24 0x20 ,0x26 0x26 0x22 0x20 0x2a 0x29 0x2c 0x29 , 0x30 0x2f 0x2d 0x29 0x25 0x20 0x21 0x23 ,0x2a 0x26 0x24 0x20 0x2c 0x29 0x28 0x2b , max :0x49 0x4a 0x4d 0x4c 0x40 0x42 0x43 0x40 ,0x46 0x46 0x43 0x40 0x4b 0x49 0x4b 0x49 , 0x51 0x50 0x4c 0x49 0x45 0x3f 0x41 0x43 ,0x49 0x45 0x44 0x40 0x4c 0x49 0x47 0x4a , range:0x3c 0x3c 0x3f 0x3f 0x3f 0x40 0x3e 0x3f ,0x40 0x3f 0x41 0x3f 0x41 0x40 0x3d 0x40 , 0x41 0x41 0x3e 0x3f 0x3f 0x3e 0x40 0x3f ,0x3e 0x3d 0x40 0x3f 0x3f 0x3f 0x3e 0x3e , the write training result: DQS0:0x38, DQS1:0x23, DQS2:0x29, DQS3:0x1c, min :0x64 0x67 0x68 0x68 0x5b 0x5d 0x5f 0x64 0x62 ,0x4c 0x4d 0x48 0x48 0x50 0x50 0x52 0x50 0x4e , 0x54 0x53 0x51 0x50 0x4c 0x4a 0x4a 0x4e 0x4f ,0x47 0x46 0x44 0x41 0x4a 0x4a 0x48 0x4c 0x45 , mid :0x81 0x83 0x84 0x83 0x77 0x79 0x7c 0x7d 0x7c ,0x6a 0x6a 0x64 0x63 0x6c 0x6b 0x6c 0x6b 0x69 , 0x72 0x71 0x6d 0x6d 0x68 0x61 0x62 0x69 0x6a ,0x65 0x60 0x5f 0x5c 0x65 0x66 0x61 0x68 0x60 , max :0x9e 0xa0 0xa1 0x9e 0x93 0x95 0x99 0x96 0x96 ,0x88 0x87 0x81 0x7e 0x88 0x87 0x87 0x87 0x85 , 0x90 0x8f 0x89 0x8a 0x84 0x79 0x7b 0x85 0x86 ,0x83 0x7b 0x7a 0x77 0x81 0x82 0x7b 0x85 0x7c , range:0x3a 0x39 0x39 0x36 0x38 0x38 0x3a 0x32 0x34 ,0x3c 0x3a 0x39 0x36 0x38 0x37 0x35 0x37 0x37 , 0x3c 0x3c 0x38 0x3a 0x38 0x2f 0x31 0x37 0x37 ,0x3c 0x35 0x36 0x36 0x37 0x38 0x33 0x39 0x37 , cs 1: the read training result: DQS0:0x3c, DQS1:0x3d, DQS2:0x42, DQS3:0x3b, min : 0xc 0xc 0xd 0xc 0x1 0x2 0x6 0x3 , 0x7 0x7 0x2 0x1 0x9 0x9 0xd 0x9 , 0x10 0xf 0xe 0xb 0x7 0x1 0x2 0x5 , 0xa 0x9 0x6 0x1 0xd 0xc 0xb 0xe , mid :0x29 0x2a 0x2c 0x2a 0x20 0x21 0x24 0x20 ,0x26 0x26 0x22 0x21 0x2a 0x29 0x2c 0x28 , 0x2f 0x2e 0x2c 0x2a 0x26 0x20 0x21 0x24 ,0x29 0x27 0x26 0x21 0x2d 0x2c 0x2a 0x2d , max :0x47 0x48 0x4b 0x49 0x3f 0x41 0x43 0x3e ,0x46 0x46 0x42 0x41 0x4b 0x49 0x4b 0x48 , 0x4f 0x4e 0x4a 0x49 0x45 0x40 0x41 0x44 ,0x49 0x46 0x46 0x41 0x4d 0x4c 0x49 0x4d , range:0x3b 0x3c 0x3e 0x3d 0x3e 0x3f 0x3d 0x3b ,0x3f 0x3f 0x40 0x40 0x42 0x40 0x3e 0x3f , 0x3f 0x3f 0x3c 0x3e 0x3e 0x3f 0x3f 0x3f ,0x3f 0x3d 0x40 0x40 0x40 0x40 0x3e 0x3f , the write training result: DQS0:0x38, DQS1:0x23, DQS2:0x29, DQS3:0x1c, min :0x62 0x64 0x65 0x64 0x57 0x59 0x5d 0x5f 0x5c ,0x4b 0x4c 0x46 0x46 0x4e 0x4e 0x52 0x4f 0x4c , 0x54 0x53 0x4f 0x4f 0x4b 0x47 0x49 0x4e 0x4e ,0x4a 0x4a 0x48 0x44 0x4e 0x4c 0x4b 0x4f 0x49 , mid :0x7f 0x80 0x81 0x80 0x74 0x76 0x7a 0x7a 0x78 ,0x68 0x68 0x62 0x61 0x69 0x69 0x6c 0x6a 0x68 , 0x71 0x70 0x6b 0x6b 0x65 0x5f 0x62 0x67 0x69 ,0x68 0x65 0x61 0x5f 0x69 0x69 0x64 0x6c 0x63 , max :0x9c 0x9d 0x9e 0x9c 0x91 0x94 0x97 0x95 0x94 ,0x86 0x84 0x7e 0x7c 0x85 0x85 0x86 0x85 0x84 , 0x8f 0x8d 0x88 0x88 0x80 0x78 0x7b 0x80 0x85 ,0x87 0x81 0x7a 0x7a 0x84 0x87 0x7d 0x89 0x7e , range:0x3a 0x39 0x39 0x38 0x3a 0x3b 0x3a 0x36 0x38 ,0x3b 0x38 0x38 0x36 0x37 0x37 0x34 0x36 0x38 , 0x3b 0x3a 0x39 0x39 0x35 0x31 0x32 0x32 0x37 ,0x3d 0x37 0x32 0x36 0x36 0x3b 0x32 0x3a 0x35 , CA Training result: cs:0 min :0x51 0x50 0x4a 0x43 0x49 0x43 0x4c ,0x4e 0x49 0x48 0x42 0x47 0x3f 0x49 , cs:0 mid :0x8f 0x91 0x84 0x84 0x84 0x84 0x7b ,0x8a 0x89 0x83 0x82 0x82 0x80 0x78 , cs:0 max :0xcd 0xd2 0xbf 0xc6 0xc0 0xc5 0xab ,0xc6 0xc9 0xbf 0xc2 0xbd 0xc1 0xa7 , cs:0 range:0x7c 0x82 0x75 0x83 0x77 0x82 0x5f ,0x78 0x80 0x77 0x80 0x76 0x82 0x5e , cs:1 min :0x4e 0x53 0x45 0x45 0x45 0x45 0x4a ,0x4a 0x4c 0x44 0x46 0x42 0x43 0x48 , cs:1 mid :0x8e 0x90 0x84 0x83 0x84 0x81 0x7b ,0x8a 0x88 0x84 0x83 0x83 0x80 0x78 , cs:1 max :0xcf 0xcd 0xc4 0xc1 0xc3 0xbe 0xad ,0xcb 0xc5 0xc4 0xc0 0xc4 0xbe 0xa9 , cs:1 range:0x81 0x7a 0x7f 0x7c 0x7e 0x79 0x63 ,0x81 0x79 0x80 0x7a 0x82 0x7b 0x61 , out
U-Boot SPL 2023.07 (Jul 23 2023 - 12:42:18 +0000) rockchip_sdhci_probe clk set rate fail! Trying to boot from MMC1 ## Checking hash(es) for config config-1 ... OK ## Checking hash(es) for Image atf-1 ... sha256+ OK ## Checking hash(es) for Image u-boot ... sha256+ OK ## Checking hash(es) for Image fdt-1 ... sha256+ OK ## Checking hash(es) for Image atf-2 ... sha256+ OK ## Checking hash(es) for Image atf-3 ... sha256+ OK ## Checking hash(es) for Image atf-4 ... sha256+ OK ## Checking hash(es) for Image atf-5 ... sha256+ OK ## Checking hash(es) for Image atf-6 ... sha256+ OK INFO: Preloader serial: 2 NOTICE: BL31: v2.3():v2.3-607-gbf602aff1:cl NOTICE: BL31: Built : 10:16:03, Jun 5 2023 INFO: GICv3 without legacy support detected. INFO: ARM GICv3 driver initialized in EL3 INFO: pmu v1 is valid 220114 INFO: dfs DDR fsp_param[0].freq_mhz= 1056MHz INFO: dfs DDR fsp_param[1].freq_mhz= 324MHz INFO: dfs DDR fsp_param[2].freq_mhz= 528MHz INFO: dfs DDR fsp_param[3].freq_mhz= 780MHz INFO: Using opteed sec cpu_context! INFO: boot cpu mask: 0 INFO: BL31: Initializing runtime services WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK ERROR: Error initializing runtime service opteed_fast INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0xa00000 INFO: SPSR = 0x3c9
U-Boot 2023.07 (Jul 23 2023 - 12:42:18 +0000)
Model: Pine64 RK3566 Quartz64-A Board DRAM: 8 GiB (effective 7.7 GiB) PMIC: RK8170 (on=0x10, off=0x00) Core: 321 devices, 27 uclasses, devicetree: separate MMC: rockchip_sdhci_probe clk set rate fail! mmc@fe2b0000: 1, mmc@fe2c0000: 2, mmc@fe310000: 0 Loading Environment from nowhere... OK In: serial@fe660000 Out: serial@fe660000 Err: serial@fe660000 Model: Pine64 RK3566 Quartz64-A Board Net: No ethernet found.
Hit any key to stop autoboot: 0 =>
Regards, Jonas